Search results for query: *

Thank you very much!!!!!

Does anyone have a wiring diagram for one of these barry grant fuel pump controllers? I have one but unfortunately don't have the instructions. It's part number 180300 and is the fuel pump controller where you can flip a switch to have high and low fuel pump speeds. I've tried searching and...

Perfect. Cheap shipping if fine by me, in no rush at all for it.

Do you know how much shipping would be to 55038? It has all the rods needed to install, correct?

Does anyone have a set of nice 68 barracuda taillights? I am stupid and accidentally broke a piece of plastic on mine. I was looking at the prices and am not trying to spend that much money. I would be fine with lenses or the entire assembly. Thanks!!

I put a TTI full system from headers back in a different car and definitely get how tight the clearance is on that. I decided when I bought this kit a while ago I would.try cheap and I guess we shall see how much I'll regret it. I do have a hoist in my garage so I'm lucky with that

Has anyone used TTI headers with the summit 3" exhaust? If so how hard were they to make fit to the collector? How was the fitment going out back? I am going to be be installing it on a 68 barracuda with a Dana 60 and stock fuel tank location. Thanks!

Any pics? How much u want?

its a 68 fastback

I am looking for the mounting bucket that goes on the fender for the headlight assembly. I have switched to fiberglass front fenders and really don't want to ruin the steel ones by taking them off that. The entire assembly including adjusters I will be fine with as well. just need a way to...

if no one sells one that's what I will end up doing but really don't want to put any time into it. the last one I purchased was thick and had a big M in it. I don't need one that has the M but would like one that is thick and only effort required by me is to paint.

does anyone make a wiper motor block off plate? I purchased one for a different vehicle a long time ago but cant remember where. its for a 68 barracuda but im guessing all A-bodies are the same. Thanks!

do you still have the 68 fastback front bucket seats for sale? https://www.forabodiesonly.com/mopar/threads/68-fastback-bucket-seats-w-tracks.396625/#post-1971914775

all of the accessories are powercoated including the valve covers. everything else is painted.

thanks, took a ton of work to get it where it is. the intake was just a raw raw w7 and then had to cut up a different intake so the water neck could be welded on.

68 Cuda project with 416 Arrington heads

I am in the process of relocating the battery in my 68 fastback cuda and have a few questions. Since I plan to bring this car to a NHRA track every once in a while I will need to make sure it is compliant with the rules. Saying that does anyone think that just putting a .032 aluminum sheet or...

I'll take 2 sets if you still have any available. Thanks!

its a custom solid roller cam and off the top of my head I believe 248/252 at 50, and around 585" lift, 110 lobe center. might be a little different I just haven't looked at the cam box in years ***** update, just looked at the cam numbers and it's a tad tamer than I posted originally. Sorry...

here is the link to the dyno of my engine with these heads if you care to see how they do on a small roller 11:1 comp.

Thanks for all of the info, keep it coming! all I knew before about these were the intake and exhaust fitment and they made huge power on my 416. do you happen to have any contact info to start this long journey?

Nope, these are aluminum heads that can accept the standard LA valve cover. The guy I purchased from said they flowed around 330's cfm at .550 lift intake and 250's exhaust (short valve limited him to go higher).

hey all, so I have the below pictured heads and really cant find much info on exactly what they are. When I bought these quite a few years ago, the seller told me they were from the Arrington truck racing team. These heads work on a standard 340 block, require pushrod oiling or spray bar...

Wow... I read a lot here and barely ever post but this is crazy. I have been talking to denny for quite a while before you even started your thread about your build. He has been in the working on this a long time. For you to even bash on him is a shame, he as given so much good info and...

check out transgo, I believe the TFOD-3 will make it a full manual. its $116 on summit racing, TRG-TFOD-3 is summits part number.

Hey, I'm looking for a hood with the hemi style scoop. It can be either metal or fiberglass, new or used. Its going onto a 68 barracuda and i would perfer it to be a bolt-on one that can use the factory hinges, if its a fiberglass I already have the lightweight springs so it would be fine. I...

Does anyone want to sell a pair of the mopar "wide" cast valve covers? The part number is P4876124. New or Used would be ok. Thanks

does anyone have or know of a place that sells a hood mounted tach similar to the Buick and Pontiac ones but without the Buick and Pontiac symbols engraved in it. I'm planning on putting this onto a 1970 duster.

Hi, I'm looking for a hood for my 68 barracuda, I would like to get the Hemi style scoop on the hood. looking for the complete hood and scoop perferably bolt-on. either fiberglass or steel doesn't really matter. Please reply to bhoey@wisc.edu thanks

hey I'm looking for a set of small block mopar cast wide valve covers part number P4876124. new or used, if interested email at bhoey@wisc.edu thanks