Search results for query: *

Hi all I'm very disappointed with my braking after rebuilding the front brakes and installed new rear discs pedal is very hard and not enough force i understood that with my performer cam (not enough vacuum) and my 20 years old mastervac and master cylinder are causing that i decided to...

Glass packs is DynoMax super turbo

Hello, if it helps here are some photos of my exhaust installation. I've had the same clearance issue when I made the 2.5 '' dual exhaust. it's a DIY made with a welder friend. As mentioned earlier, it's very close to the tank, but this final part of the exhaust is not very hot. I stuck anyway...

Hi all First, thank you again for your reply and interest for the braking problem we now understand better the problem of "undersized" SSBC calipers and that we never had good braking with that As I said, my friend with his 69 Cuda took this way with SSBC calipers, because it was "bolt on"...

Thanks for your reply ! I don't quite understand how a famous brand like SSBC was able to design and sell a poor equipment like the A-199 calipers we waste money and time for disappointing result :( we see more clearly now and looking for another solution

Hi, we made brake upgrade on a 69 Cuda Formula S (a friend of mine) with stock front factory discs (he didn't want to upgrade to 4.5'' bolt pattern and with 4'') the breaking was poor in spite of new front discs and rebuild calipers We decided to install A199-1 SSBC calipers and semi metallic...

Ok: thanks Dave for the explanations ! you're right, I live in France with the damaged thread, at this moment I'm stuck with this problem and can test the car at first, I'll repair it with Helicoil for testing the car in the next coming month, I'll order new ones and send it to my friend in...

Thanks for your reply and advices yes it's the thread of the bracket damaged you're right, it's better and more secure to change for new brackets i will looking for new ones i see 3208 as reference I've made some modification for 4,5" bolt pattern and I've after 70 single piston calipers...

Hi, i have some problems with my caliper mounting brackets, the threading is damaged, and I have to repair it with Helicoil someone can confirm me the threading of bolts for me it's 3/8''-24 but I'm not sure Many thanks

Hi, I'm installing too on my 67 a rear disc brake, I have to replace the wheel studs for more 1/2'' longer i have some difficulties to find to determine exactly the knurl diameter for the new studs I join informations with measurement, I think I have to find .684'' or .685'' knurl studs I you...

ok, many thanks :thumbsup: for this precise feedback, I understood that the filter and/or 2-hole extension is only necessary before 66. I can therefore use my 2-hole extension and the filter with one hole that was delivered to me ( for 1968). considering that the small hole is useless, there...

Hi Duster 346, thanks for your feedback if I install a large one hole filter with my two holes filter extender, it's ok ? or do I use one hole filter with one hole filter extender ? (photo joined) the small hole doesn't seem to correspond to an hydraulique way of the valve body (photo 1) of...

Hi, one question about the transmission filter I'm in the process to change oil and filter of automatic transmission : 1968 A727A PN/1B119168 with Turbo Action valve body PN/17166 and TCI alu deep pan TCI-128000 I'm surprise to see apparently that was the wrong small earlier filter for 62-65...

Hi, thank you very much for your reply :thumbsup: we will first looking for where exactly is the problem inside the wheel and if it's possible to grind the caliper. after, we will try to adapt another caliper, better solution instead of new expensive wheels best regards

Hi All, I've helped my friend to install a DBK 834 rear disc brake kit on his 1969 Plymouth Barracuda, before we order the kit, we were inform that works with minimum of 15'' wheels we have 15'' Rallye wheels. We install the kit, the job is done. But when we put wheel in place : clearance...

:thumbsup: good job

Many thanks for your comments ! :)

Hi All I introduce myself I'm a fan of second generation for second generation of Barracuda's for about 35 years i had 2 Barracuda's : a 68 Fastback 340CI and a convertible 68 340CI during nineties I started restoring a 67 Coupé formula S in 1995 and still have it today the 67 is equipped...

Ok, thanks for your reply and for your piece of advice

Hi all I'm looking for ring and pinion with long ratio as 2.76 or 2.93 i investigate on the web but 3.23 / 3.55 .... and higher, no problem to find but under 3.23 it's not available if someone has use parts or if you know a supplier, I'm interested Thanks

ok thanks for your feedback i will try first to reinstall the axles without removing the button best regards

Hi all I’m installing a rear disc brake kit MDCDRD01 rear end is a 8.75 differential with 741 case housing I’m ready to reinstall my rear axles with new no adjustable bearings WBK04 I would like to have confirmation for : - Does the Inner housing axle seals need to be removed ? - Does the two...

Presentation