Search results for query: *

I purchased a used enclosed trailer a few weeks ago which the previous owner was using for transporting dirt bikes. I plan to tow my cars in it soon, but there is currently only 4 D-rings for securing the load. I'm thinking of installing E-tracks or D-rings, but I wanted to get suggestions from...

Listing for a friend. 9” 727 Torque Converter, 069J with ‘67 and Later Splines for $300. Will be available at Chryslers at Carlisle from late 12 July-early 15 July. Start a conversation with me, include your contact info, and I will put you in contact with him.

Listing for a friend. '66-later B-body Hemi Headers for $300. Will be available at Chryslers at Carlisle from late 12 July-early 15 July. Start a conversation with me, include your contact info, and I will put you in contact with him.

Listing for a friend. 4 each '70 or '71 LBP Rallye Wheel Center Caps for $150. Will be available at Chryslers at Carlisle from late 12 July-early 15 July. Start a conversation with me, include your contact info, and I will put you in contact with him.

Harley-Davidson Panhead Chopper. Rigid Paughco frame with 6" over Paughco wide Springer front end. 79 ci (stroked to 4.25") Panhead engine with 5100 miles since rebuild. 4-speed trans with 200 miles since rebuild. STD dual plugged Panheads with Shovelhead spigots; allows for running Shovelhead...

Well, I guess I've been posting my T56 questions in the wrong forum, so reposted to right forum. Do all versions of the T56, (e.g. LS T56, LT T56, Ford T56, Viper T56), have the same bolt pattern on the front flange, where it bolts to the applicable bellhousing?

Welcome to Jeff Johnson Motorsports Event Management & Marketing. Featuring Automotive Swap Meets, Car Shows and Drag Racing across the USA Anybody going? I'm planning to go for Saturday and Sunday. I've been watching on FB; it says they've been putting a lot to money into National Trail lately.

Harley-Davidson Panhead Chopper. Rigid Paughco frame with 6" over Paughco wide Springer front end. 79 ci (stroked to 4.25") Panhead engine with 5100 miles since rebuild. 4-speed trans with 200 miles since rebuild. STD dual plugged Panheads with Shovelhead spigots; allows for running Shovelhead...

Well, Ops Check Good! I'd post a 5 sec video of it running, but I don't know how. I finally wired up a dedicated 30A 110v circuit to the attached garage. I got tired of constantly going to the basement to reset the 15A breaker for the garage/outside outlets. I couldn't run my drill press for...

She ran great as usual. She sure loves to suck the fuel, but man she runs good. She rides so smooth with those radials.

Somebody please buy or steal this thing and crush it to put it out of it's misery. I hate to see it continue to suffer. 1965 Dodge Dart for sale #1802104 | Hemmings Motor News GM people should never be allowed to own MOPARs. This is what can happen.

Has anyone attempted this yet with their Mopar? I've looked outside of here and all I can find so far are Chevy related posts. I'll be using a 1996 Viper T56. I'm starting the cutting out and fabbing of crossmember and trans crossmember soon; just trying to make future plans. Please no...

Anybody else going? Cinco DeMopar - 2016, Lafayette, IN

Well, I couldn't find the right section to post this, so here goes. Mods, please feel free to move, if this is the wrong area. For those of us that are not tech savvy, any suggestions on how to accomplish this task? Thank you in advance.

A-body BBP 7 1/4 rear axle. Comes with U-bolts, spring plates, drums, and backing plates with all 10" brake hardware. The only thing it does not include is the banjo bolt, brake tee, and brake lines; you should be able to take this from the axle currently in your car. The shoes and the drums...

http://www.homedepot.com/p/Milwaukee-Metal-Hole-Saw-Kit-15-Piece-49-22-4027/206167001 I finally got tired of destroying wood hole saws on metal and decided to buy a metal hole saw kit. I was expecting to spend some decent money and never expected to find this deal. They are sold out on line...

I cleaned it a little and didn't see any numbers, but I probably didn't clean the right spots. It came with a 64 Barracuda I bought years ago, but sold shortly after buying. It's a 3-speed shifter, but I've never owned a 3-speed before, other than a column shift, so I have no idea how to...

A-833 A-body 4-speed non-overdrive. Came with a car I bought years ago. I have never ran this transmission. Looking at the main case numbers it appears to be a 1968. You can see by the pictures, it is very clean inside. $450. Local pick up only.

http://www.monstermopar.com/#!cinco/c979 Anyone planning to go? I've never been before, but my buddy asked me to drive one of his cars for him. He said it was a great show last year.

Mopar 4-speed mounting plate included. Missing Mopar reverse rod and reverse arm, reverse spring tension rod, handle, spacers and bolts to attach shifter to included Mopar mounting plate. Extra rod below is a Mopar rod for a different shifter and included so you can bend it to turn it into a...

Will repost later.

I'm not saying that I'm going to change my build to a blower motor, but I have considered it in the past. I'm just wondering if anyone here has any experience with them. There is a company local to me that builds custom sheet metal intakes for whatever your needs are, but I'm leery of a...

http://annarbor.craigslist.org/pts/4741681683.html Hilarious!

Thursday of last week I was in a bad motorcycle accident on my 1950 HD Panhead chopper. I'm very lucky to be alive. Fortunately, I was the only person involved. Rookie mistake made on my part. I was the last bike of nine in a fundraising event. I was unfamiliar with the road we were on...

The Memory Lane Car Show is today in the Cincinnati Mall parking lot facing I-275 near Bass Pro Shops. (600 Cincinnati Mills Dr, Cincinnati, OH) 100% of the proceeds will benefit Alzheimer's Association. It is open to all cars and trucks. Registration is $15 from 9-12 First 50 cars or...

4 each 16/35-15LT Super Swamper TSL Boggers with polished chrome rims. Located in Lebanon, OH. $750.

I need the adjuster link (1) that threads onto the carburetor rod (12). I don't think it matters, but it's for a '77 big block.

I have been wanting one of these for the past 1.5 years at least. Since I sold my 1999 Ram 2500 4X4 Quad Cab Long Bed last month, I needed something to replace it. I almost contacted bighammer about his 3/4 ton 4X4 Power Wagon Club Cab Long Bed as his is very nice and an unbelievable price...

I'm welding in the coil-over shock crossmember. Prior to this, the ladder bar suspension was triangulated, which came out perfect, and the lower shock brackets are welded onto the housing the same distance on each side from the axle flanges. My problem is the upper shock brackets on the newly...

A long time ago I won an auction on ebay for a pair of Koni Universal Coil-Over Shocks 82121126SPA1 with springs for an extremely low price. I don't know what pound springs they are. What perplexes me is, the spring rate is adjusted at least a half inch different per side. Would the last...