Search results for query: *

Hi All, Hope everyone is staying safe. Just want to ask advice with misfire/ignition on my 383. It's misfiring slightly above 2000rpm and damn annoying. It has stock Mopar electronic dizzy and MSD Streefire Ignition module. Have change plugs, leads and still hasnt fixed it. Any ideas on where I...

Need some help and advice on rear leaf springs on my '73 Duster. Unfortunately I made the mistake of putting Mopar P3412003 (3200lbs) leaf springs in it (to replace the old screwed springs) and the car is jacked up real high and want it sitting way lower. Anyone have advice on what I should...

Hey Guys, Just for your tech heads and racers out there. What ET should my Duster be running? And any advice on how to pull more power? Here's some specs of the basic combo.. Weight: 3600 pounds (with my fat *** in it) 383 Big Block - stock crank and rods - 30 thou over 9.2:1 comp (flat...

Just want to ask for any advice on set up on SS Springs. I've got a '73 Duster that recently ran 13.10 @ 106mph but with a lazy 1.9-2.0 60ft times so it was spinning off the line. I recently put SS Springs (3600lbs), Competition Engineering Rear Shocks set at 50/50, fronts are 90/10 and...

Hi All, just hoping I could get some advice on an issue I encountered on the weekend (and it's happened before) when racing.. Here's the situation. Went out drag racing last Sunday and it was extremely hot (around 35-38 degrees celsius) which is around 95-100 degrees faranheit and everytime I...

Shocking day racing last Sunday. I've never seen track so bad. 85% off us out there were plagued with wheelspin issues. Best I ran was 13.4 @ 106mph and that's spinning thru 60ft sideways. My 60ft times were like 2.3's - 2.6's. It was atrocious! Got to the point where I took the tyres down to...

MOPAR RUMBLE 2014 was rained out but we got to do a couple of skids... Put my Go-Pro on the guard for something different and footage is pretty cool! https://www.youtube.com/watch?v=do5STFTIOE0

I want to purchase a set of drag slicks for the Duster to go racing next month and just need some advice. On the rears I have 15" x 8" rims and rear diff ratio is 4.10's. Question 1: What size tyre should I run? 27", 28" or 29" Question 2: Should I run ET Drag Radial or Full Slick? Question...

Would love to hear stories of low buck budget big block combinations and the times you have run.. I'm sure there's a fair few 11-12-13 second low buck big block combo's out there... A thread for a bit of fun!

Hi All, Quick question in regards to cam size? I'm looking at building a budget 440 bottom end and using my ported 516 heads. Standard pistons at zero deck. Would this cam be a good street/bracket cam? Howards Cams - Solid - #722402-10 Duration at 0.50 = 246 / 252 Lift = .515 / .530 Lobe Sep...

Hi All, I've been offered a set of Weld Draglites at a great price. 15" x 4" fronts 15" x 10" rears (wearing 255/60/15's) * I think the 15" x 10" are a 4" backspace. Will these fit under stock 1976 Duster. I've got 15" x 8" currently with 255/60/15's under the rear and I reckon I can fit...

Hi All, I'm chasing a really good Front Drivers Door Panel for 76 Plymouth Duster. Any colour is OK but if in white even better. Thanks heaps for your assistance.

Hi All, Have another thread in here but it's an offshoot so thought I would start a new thread in the relevant section and ask advice. Thanks to a few Members who answered some queries in another thread. Just want to get some advice in regards to the combo in my '73 Duster. Took the Duster...

Here's a clip of my Duster in the burnout comp from Mopar Rumble at Sydney Dragway from last weekend. Car is called 'The Taxi' for obvious reasons and I decided to throw Taxi sign on for a laugh. PLYMOUTH DUSTER BURNOUT MOPAR RUMBLE SYDNEY DRAGWAY 8.12.2013 - YouTube

Hi All, I'm chasing a '76 Plymouth Duster interior parts in any colour and good condition. 1. Drivers side door trim with woodgrain section 2. A Pillar Moulds 3. Sail Panels Thanks...

Hi All, I'm running flat tops in my 383 and 516 heads with 2.14/1.80 valves, Comp Cams Valve Springs and Roller Rockers and Mopar Purple 484 cam. Want to upgrade cam to newer profile and bigger cam but not sure on valve/piston clearance and also going to port and polish heads as well.. Anyone...

Here's a pic I took from my mate's shed with his car in the pic too.. Was done on a backing board by some young local kids...

I've got a mild 383 in my Duster, 10.0 comp, bigger valves, Eddy RPM intake, Mopar 484 cam - 727 auto and 4.10 gears... It's a weekend crusier but would like to hit the strip at some point. Like to have fun on the street though. What carb would you guys recommend? Holley Vac Sec or DP? What CFM...

WANTED - Plymouth Duster automative console. Preferably in crappy condition as will be modifying...

Hi All, Can anyone let me know what this stripe kit is suppose to look like and where I can get a kit from?? My '76 Duster is optioned with #V4W - Strobe Stripes White... Thanks heaps gents.. Cheers, Andrew

Having an issue with my 383 at the moment... It's a mild engine, 484 purple cam, pocket ported heads, big valves, 10.5:1 comp, Eddy RPM intake, 750 Vac Sec and 3000 stally.. Problem I'm having is that when I put my foot down it get's up and boogies and once I get off the throttle it wants to...

Hi All, I've got dual ballast resistor set up on my Duster with Electronic Dizzy - Orange ECU and just purchased MSD Blaster 2 Coil. Just want to ask 2 x questions... 1. I want to get rid of the Ballast Resistor, which wires to I connect together? 2. I'm not getting 12v to the coil, how do...

On my '76 Duster, I have just received brand new power steering pump. The bolts on the back that hold the bracket onto the pump, do these bolts have to be sealed as I'm quite sure they bolt into the reservoir? Apologies for the silly question? if so, what's the best thing to use???

Hi All, Here's a few pics and video from Mopar Rumble 2010 put on by my club The Regals Mopar Car Club in Sydney, Australia. This is the first event we've organised and was a huge success considering the weather wasnt favourable.. It's going to be a huge event next year.. Check out video...

Hi All, Need you expert assistance... On my '76 Duster, now with 383 and 727 I've run into a couple of issues... Took the car to gas station and went to fill her up and it filled about 3 gallons and did not want to fill anymore and just kept spilling back out.. I've changed two things...

Hi All, Here's a few pics from Chryslers on the Murray Event in Albury, New South Wales, Australia... Last weekend...

I purchased a set of wheels and they have 15x265's on the rear.. What would I need to do to get these to fit under my Duster? Duster has 8.25 diff.. Would spring relocation kit do the trick?

Hi All, Thought you would all enjoy pics from New South Wales All Chrysler Day, 1st November, Sydney, Australia... Few pics of my Duster in there...

Can anyone let me know of a good speed shop in Los Angeles? Preferably located near El Segundo (not necessary but closer the better)?? I need to get electronic exhuast cut outs.. Thanks!

Hi All, I've just purchased '68 383 and 727 from Los Angeles and should have in my garage in about 6-8 weeks or so.. This is to go into my Duster... I'm going to purchase the Schumacher Tri-Y's, Engine Mounts, Torque Strap kit shortly to make the swap nice and easy... I;m after engine...