Search results for query: *

Looking for a B&M weighted flexplate for a 727. The type used for a 360 (external balance) and a neutral balance converter.

Working on a 70s 360, and upon putting it back together, the damper slid right over the snout of the crank by hand. I found this strange, as I did have to use a puller to remove it on tear down, albeit it came off super easy. Its a factory balancer, and it appears to be in good shape in terms of...

Just wondering who has used one, and what it stalled to roughly behind your combo (details of car helpful i.e. weight, gear ratio, power or e/t). I know some people say they are good for up to 2800, but would like to hear real world experience and not people just regurgitating what they heard...

Wondering if anyone can help identify what stall this factory converter might be. I didn't have a tach in the car to know, and would like a rough idea if possible to decide if I want to reinstall it with the new combo. It was behind a 360. Thanks!

Wondering if anyone is running the stainless rocker arms that Speedmaster sells on a Speedmaster, Edelbrock or other stock type replacement head, and if they have any issues with rocker body to spring retainer clearance? Was watching a video on Youtube where someone had setup the stainless...

Hey guys, Playing with the idea of changing out the pistons in my 360 IF I can find a drop in that will work without rebalance. I have done some digging, and would prefer a forged piston if I am changing pistons, but I have only been able to find some info on some of the Mopar boards about...

Wondering if anybody on here has ran these Speedmaster heads Mopar Chrysler SB 318 360 170cc 65cc Hydraulic Flat Assembled Cylinder Heads or these valvesprings they sell (these are the ones loaded on the heads that come assembled in the link above) 1.450" Od. Dual Valve Springs w/Damper -...

After finding out that a custom solid ft cam from howards probably wont be ready until June or July at the earliest, I contacted Oregon cam about regrinding the super mild crane cam that was in my 360. Gave them my info, and Ken suggested these 2 grinds #1920 230/236 @ .050”, 264/270 adv...

Have this 360 torn down and have a few questions. Wondering if the pistons are stock, or stock replacements at .030 over. I ask because they all have the stamping "30" on them as pictured. I didnt get a chance to clean up the carbon in the cylinders, but managed to get a 4.02 reading on the one...

Debating between these 2 Howards Hydraulic flat tappet cams for a mostly street cruiser with some strip action (idle quality is not a concern fyi). Engine is a 70's 360 with the following: - Ball hone rebuild on the bottom end (stock bottom end) - Stock heads with .028" thin head gaskets...

How would you build a 360LA with the following restrictions and with a goal of a mid to low 13 second street car at 3600lbs - Stock bore, and stroke (and pistons preferably too) - 3.00 rear axle ratio - must run on pump gas (87 octane preferably, but 91 is an option) - max budget of 3k for...

Trying to finish off some swap parts for my 5.7 into my 71 scamp, and rad hoses have me scratching my head. As you can see from the pics, the rad is a Champion 3 core with the factory inlet and outlet locations, and I have an 04 truck timing cover on the engine, which has upper hose on driver...

I want to delete the A/C and power steering on my 07 5.7 hemi. It is a truck timing cover engine (A/C up high on drivers side, Power steering down low on drivers side). I know there is an a/c pulley bracket that allows you to still have correct belt routing, but I can't seem to find anything in...

Edelbrock Victor intake manifold for LA engines. Used one season, gasket matched, in great shape! $200 plus shipping. Item located in Toronto, Ontario. Paypal and interac e-transfer only. Message for pictures

Original Mr. Gasket Vertigate Shifter in EXCELLENT condition for 67-76 Mopar A-body Chrysler. Comes complete with shifter, mounting bracket, shifter rods, and boot. Worked FLAWLESSLY, lots of fun, hard to find one in this condition. Currently away in a box on the shelf in the garage/ Message if...

Small Block Mopar Hedman a-body headers, 1-5/8 primaries with 3" ball and socket flange collector. Have a few dings for clearance in them, otherwise in great shape. o2 bung already welded on, need a little cleaning and some paint. $150 obo Small Block Mopar Custom Comp Cam Solid Flat Tappet by...

You pole smoking douche bag, you have been officially called out! Show up to the War in the North event with your pathetic wheelie machine and even worse ego and bring cash so that I can show you the *** end of my "car full of problems" that is "slower then ****". Gotta love a clown with an...

I am about at my wits end with my gas tank.. This season my gas gauge decided to stop working- I put a stiffer spring in the reostat, made sure all my grounds were clean and proper, wiring to the gauge is fine, etc....I had an issue with the float not floating (this was an aftermarket sending...

This is the second key cylinder/mechanism that has done this to me. I pulled off my steering wheel the other day since I was changing it and went all the way down to the key. For some reason, there is a mechanism to the left of the key cylinder (when looking straight at the column) that has play...

The latest flyer for the Sparta Small Tire Shootout event coming this July 3-5th at RPM Magazine's War in the North event, also featuring the Pro Tree Racing Association (PTRA)...held at none other then the awesome track St Thomas Raceway Park! Payouts are currently at $2500 to the winner of...

The latest flyer for the Sparta Small Tire Shootout event coming this July 3-5th at RPM Magazine's War in the North event, also featuring the Pro Tree Racing Association (PTRA)...held at none other then the awesome track St Thomas Raceway Park! Payouts are currently at $2500 to the winner of...

Bolt on cowl induction hood for 1970-1972 Duster, Scamp and Valiant. This hood is in excellent shape, and is made by AAR Fiberglass. Hood is painted top and bottom with a single stage hot rod semi gloss black color. Hood retails for $625, looking for $450 obo. Will not ship, hood must be picked...

And the rear bumpers are not like a 71 dart (1 single tail light lense on the scamp opposed to the double lenses on each side of a dart). Was planning to buy from Unlimited, but was informed that they sell the bumper with NO holes cut out....although the lady I spoke with almost sounded like she...

Attention all racers and race fans! It is with great excitement that we announce a second race date for the Sparta Small Tire Shootout event series for this year! Saturday, October 4th will be the date of the fall event that will be taking place again at the legendary St. Thomas Raceway Park in...

Attention all racers and race fans! It is with great excitement that we announce a second race date for the Sparta Small Tire Shootout event series for this year! Saturday, October 4th will be the date of the fall event that will be taking place again at the legendary St. Thomas Raceway Park in...

Need to order some, don't have the pump with me, and can't remember for the life of me what size the cup plugs are supposed to be...anybody know???

Isky 9005 valve springs (dual spring with a damper). Here is a link to them in the Isky catalog http://www.iskycams.com/pdfcatalog/2004-05/page42.pdf Only have 11 runs on them on the dyno. Brand new condition, pressures all tested out ok. Summit sells these for $205, I am asking $125...

How much oil are you guys running in your kevko pans? And then in total for the engine? Their site says 5 quarts...wondering if anyone has poured their pans and runs less or more?

Looking for a small block short block, with some decent parts in it. I am in Toronto, Ontario in Canada, so the more local the better as shipping could be insane. Please message me with what you have!!!

Looking for a small block short block, with some decent parts in it. I am in Toronto, Ontario in Canada, so the more local the better as shipping could be insane. Please message me with what you have!!!