Search results for query: *

  1. B

    [WANTED] 225 /6 hard fuel line Pump to Carb

    I got mine from either Classic Industries or Inline Tube. The routing around the carb is likely different depending on if you have a Carter BBS, BBD or Holley.
  2. B

    Spark plug wire routing for a 340 small block.

    You did a brilliant job with those. Kudos!
  3. B

    Rewiring my EFI Magnum - 1970 Dart Swinger

    Wow, nice work so far. I can’t wait to see how this turns out.
  4. B

    The mystery of the missing oil?

    The engine in my 65 dart didn’t have a ton of blow by but drank a quart of oil every couple hundred miles. The rings had almost not tension left and the cylinders were shot. Modern synthetic oil doesn’t burn blue smoke like the good ‘ole days.
  5. B

    Has anybody recently bought a slant six crate engine?

    My block has been at the machine shop since before Christmas. Honestly, if they have long blocks on the shelf ready to crate and ship with a warranty then I’d say go for it. If I started the project now I’d likely not see the block again until early summer. My machinist said it was going to...
  6. B

    Firm Feel Sway Bar

    Thanks. My calipers are already mounted rearward. I think it was a happy little accodent that I mounted them the “wrong” way. I’ll give Firm Feel a call after Christmas and see what their lead time is like on sway bars.
  7. B

    Firm Feel Sway Bar

    Does anyone have any pictures and/or experience with the Firm Feel early A body front sway bar kit? I’m wondering how it compares to the Hellwig 55914 kit.
  8. B

    New Upper A Arm Troubles

    i have a Firm Feeling I know who you are referring to.
  9. B

    New guy with M300 mini motorhome.

    i’m not an RV person but those your RVs look awesome. I love the ’70s styling.
  10. B

    Dutra Dual downpipes

    OMG, that’s awesome. I mean, he put the power snail right where my A/C compressor lives but otherwise, that rocks.
  11. B

    Dutra Dual downpipes

    Bad ***! I would also accept duals into a T3 flange.
  12. B

    This is crazy. Elite Motorsports

    I know we are not supposed to judge these days, but pitsburgracer‘s post is cuter than hyper_pak’s.
  13. B

    Parts ID/Does Anyone Need These?

    Early seventies, A-body v8 cars got them as an upgrade over 9" brakes
  14. B

    Non traditional thanksgiving. What are you having

    My wife is making lasagna which is my absolute favorite.
  15. B

    Tire size for easy steering

    Firm Feel sells a kit to put roller bearings in an early A idler arm. I haven't tried it but it's on my winter project list.
  16. B

    [SOLD] Atomic EFI complete setup

    Do you know the part number of the fuel tank and which pump is in it?
  17. B

    AAA SUX!!!!

    I haven't had a good experience with AAA in the last 10 years or so. Their service went from good to poor (waiting a couple hours) to "We've got nothing available but you can submit a receipt and we'll reemburse you." You used to be able to call in and talk to a person. Now you call, talk to...
  18. B

    Timing Advance Sanity Check

    Bewy - The piece with the 11.5 marking is above the weights. It’s the part the weights are pushing against That has the points cam. The advance seems to stop around 2200 RPM. 1WildRT - I’m kicking myself for not measuring the slots while I had it apart. And I agree, I probably shouldn’t be...
  19. B

    My miniature dachshund wanted a taste of my latte.

    OMG, that picture is hilarious!
  20. B

    Boosted slant?

    The slant two barrel manifolds used a BBD flange so a 2300 would require an adapter, right? You might want to make sure you have metal gaskets for the adapter since paper will likely get blown out under boost.
  21. B

    Ebay GT45 Turbo

    That could be considered a good thing if he’s crazy enough to run a 7.25“ diff, right? :D
  22. B

    Timing Advance Sanity Check

    Long story short… I have an unmolested distributor with a govenor stamped R11.5 so I should expect to see 23 degrees of mechanical advance with a dial back timing light, right? Other than dirt and grime is there anything that might block the distributor from only getting half of the expected...
  23. B

    [Found!] 65 Dart Left Taillight

    I called Laysons today. They didn’t have the lens I was looking for in stock but they just got the raw parts back from fab and are in the process of assembly. The shipping ETA is 1-2 weeks so I decided to pull the trigger and submit an order with them. Thanks to everyone who offered help...
  24. B

    I have fallen and I cant get up

    That looks like a LOT of hard work, kudos to you both.
  25. B

    64 dart trunk torsion bars install tips tricks?....

    This probably goes without saying… You really want a helper to hold the trunk open. I tried using a hood prop and every other time I hit the rod with a mallet, the drang trunk would drop on my head. Not my finest hour but it explains a few things, don’t it?
Back
Top