Search results for query: *

What diameter master cylinder bore do you have, and do you like the feel? ? Are the wilwood calipers the 11 inch disc / 4-piston ones?

I saw a table in a factory manual somewhere, showing that engines for the a/c equipped cars did indeed have a water pump pulley which was slightly smaller than the crank pulley. So yes, A/C cars did have an overdriven water pump according to that table. I believe that table was for the 273...

Your work is of amazing quality! I discovered that a "stepped bit" is perfect for drilling holes in sheet metal. Although a bit expensive ($29 when I bought mine), I was thrilled at how easily it drilled a hole in the firewall. Each step centers the hole for the next increasing size. The bit...

Very nice! Wow. I thought I had it difficult when I had to travel 30 minutes to go work on my Barracuda. You're far away from your car. Which steering wheel do you have? I like the look of it.

Wow, that was well-written. It makes sense.

hi @Syleng1 - Was this from FirmFeel? They seem to stock rebuilt original units such as the "Small Sector Stage 2 (Modern Street)". Or was this a Borgeson like from Mancini Racing (BRG800126), with a 14:1 ratio? 14:1 sounds tough from other comments here. Was it good for you? That's what...

I have two thick repair books? (not A-body). It would be a shame to just toss these; I hope someone can use them: #1-- Motor's Auto Repair Manual 1957 #2 -- Motor's Auto Repair Manual 1963 $5 each plus shipping from California, USA. The 1963 book covers cars from 1953 - 1963 with these brands...

I take it these are 16 inch tires - is that correct? Nice, as we are looking for 16 inch wheel/tire combinations. Which wheels do you have?

#4 4. Backing plates worn where the shoes ride ...is insidious. Everything looks OK, backing plates might show wear, but the shoes bind against the backing plate. This happens even if the 'pads' where the shoes rub are lubricated. It took me a LONG time to figure this out. Symptoms include...

I found the article: https://www.forabodiesonly.com/mopar/ams/welding-in-a-bung-on-a-steel-fuel-tank.369/

Hi - could you repost that article? The link doesn't go anywhere. Could you explain your plan? Doesn't fuel vent out of the original gas cap? I'm restoring a 1967 Barracuda and I need to replace the fuel tank so I'm interested in ideas to make the car safer / never smell like fuel / etc.

This is good to know, thanks, @RustyRatRod. Thanks @GTX JOHN. We are so far away from those power levels that I won't worry about it right now. But it is good to know

Thanks @PROSTOCKTOM . I'm exploring all options to go from my 7-1/4 rear end, small bolt pattern 5x4, to the big bolt pattern 5x4.5, so I can install Wilwood disk brakes. The current diff ratio is 2.something. The car was nice on the highway from what I remember driving it long ago, so a tall...

Thanks. That's what I was thinking - it's easier to change the whole unit in that design (8-3/4 Mopar).

@Curtis336 - Is this a B200, or a B300 van? (The B200 has 5 lug wheels, the B300 has 8 lug wheels and a super heavy-duty full-floating rear axle.) I believe your van is a 1974, correct? Is it the 318 engine with the 2 barrel carburetor? I had a B200 van and a B300 camper top van. Both had...

Is it easier to change gearing in an 8-3/4 inch unit than the 8-1/4? A friend once told me you need a spreader to take the gears out of the 8-1/4 style, is that correct? (guide to the different rear ends: Moparts on the Web - Main Index)

What backspacing did you specify for those 17x7 Torque Thurst ii wheels? Thank you for all the detailed information and photos that you posted!

No, a 13 inch rim will not fit on 10 inch drums. Best of luck with your braking project!

Great - Please direct message me and let's get this deal going. Thanks.

Thanks, all! That makes sense - switches can probably be purchased from a few places. Nobody is making more knobs, is my assumption. I'll try 'gentle persuasion' and penetrant spray, then plan to reach behind the panel and release the knob. If releasing won't work, then I'll destroy the switch...

Wow, thank you for such a thorough answer, @Dana67Dart ! There is some minor corrosion here and there, but not much inside the passenger compartment. I will spray some penetrating oil (non-graphite) in around the shaft, and I'll press that release button to remove the post and knob. Those...

Does the headlight switch pull out to turn on parking lights and headlights? (It's a round knob on the left side of the instrument panel) Mine rotates but won't pull. I'm afraid to pull it too hard. Thanks,

Thanks for all the info in this thread. Thanks @Mattax for the diagram - this helps quite a bit. Naive question: Does the headlight switch pull out to turn on parking lights and headlights? I'm afraid to pull it too hard. Mine rotates but won't pull.

I see. Hmm. I have the stock cast iron water pump. I had better go measure, anyway. May I ask the reason you went with an aluminum water pump?

Interested. I direct messaged you.

Thanks, all! Below is a photo in all its (faded) beauty. The 2bbl 318 engine idles if you hold the throttle open a little. The second photo shows the vacuum holding VERY steady at 13 inches vacuum. The third photo is my temporary fuel tank - a metal tank purchased from a mower-repair shop. I...

Hi all - I'm restoring a 1967 Barracuda fastback. The car originally came with a 273 Commando engine (which I have, but that's a later project). It now has a 318 in it. My plans: I've done minor work to get it running. Now I'll take it to a local hot rod shop I know, to have 4-wheel disc...