Search results for query: *

Have a 69 am/fm radio from my valiant I’m selling. Radio worked when pulled around thanksgiving. Not in the greatest shape, had a rats nest behind the dash. All buttons work, none are broke, and it comes with the faceplate. Not sure what to ask, It might work for 5 minutes or another 50 years...

not a bad idea, but might exceed my 500 dollar get back on the road budget lol. Im also actually more in the middlebranch area, even closer. small world for sure!

I wasnt a big fan of four door a bodies, but this one is growing on me pretty fast. The two tone is pretty cool, Im especially glad the color break trim pieces are still there. Dont know if theres many of those floating around

Got this today from west salem ohio (near dragway 42) had been posted for sale locally for a while and went to take a look yesterday. Didnt have much faith but it turned out to be a pretty decent car. 69 valiant 100 with a 225. southern car, sold in alabama and spent some time in florida ( '78...

One NOS emblem, part # 4022847 Letters are black instead of white. The only bit of info I found on researching the number was 79/80 fender emblem, must be for volare dusters. Also pins are in different spots than the older emblems. Has never been used, with factory keepers still in place on both...

I’m looking for a pair of wheel well arches to correct a duster i bought that had been cut out to fit big tires. Attached pic is of the metal I need. Hoping to find some small used pieces before I resort to buying full quarter lower patches. I’m located in canton oh. As long as they’re not...

Pm sent

Same for the dr.

looking for a 69 valiant grill, had no luck finding one at the nats. If anyone has one to let go pm me pics and price. Doesn't need to be a show piece, something driver quality or better. Thanks in advance

PM sent - first dibs

Hey im looking to install a set of headers on my 06 300 srt8 soon. was wondering if anyone on here did headers on an LX car before and if there were any good tips or info. so far ive seen to remove the starter, alternator, washer resevoir, and undo each motor mount one at a time to lift the...

still have 2 pans left , pans are $85 a piece shipped. pan 187 #3 and 699 are the ones available.

sorry --- just saw what section this was in. i might have a set of headlight trim rings, ill have to look around for them. theres a pretty nice 4 door for sale near me for 2500 with lots of good parts on it if you were interested http://youngstown.craigslist.org/cto/4818402311.html

pan #2 is sold, pans 1 and 3 are still available.

BUMP still have the pans. need money for some stuff. prices are all VERY negotiable.

I have an 06 300c srt8 with the 6.1. My oil temp has a digital reading on my dash and operating temp is usually 225 to 230. analog coolant gauge usually reads between 200 and 230. I dont think its real accurate. i would say operating temps should be between 220 and 230.

my kit is a wet shot, where i was planning to use a secondary regulator spliced in before the carb feeding regulator to run the higher pounds to the solenoid. carb will maintain 8 psi for the pass. Is there another way to set this up better? I figured that would be a decent way to do since the...

hey I just saw this popped up had no idea it was mine until about half way through. but at any rate, since I have four years more knowledge at this point and have done some 1/4 mile runs with it I think I have some more intelligible comments. motor is the same, going to rebuild this winter...

oh and i moved it the other day after sitting for a while and the throw out bearing/ clutch chatters. offers appreciated

bump. 1900 obo. would make an awesome car for a swap

bump

im workin satuday, but I'll be over to quaker after I hope. Im not bringing a hemi, but ill drive the wedge and come to watch

i sold one like that to a member on here in about the same shape last winter for 1500 bucks. red with leather interior 400 bb. i miss it sometimes but I also like having paint on my duster so it was well worth it

Oh sorry and The pinion is what broke. Solid clean brake but the driveshaft spun for a couple seconds so hopefully it's not bent

Ah I see. And I'm not sure it was like a hurricane when it happened and then I flat towed it home during the storm. Hope to take a better look at it tomorrow if the weather eases up. Thanks for the info though !

hey guys, had a problem leaving work today. went to pull out of my parking spot and due to some heavy acceleration, my pinion in my 02 dodge ram 4.7 snapped off inside the yoke of the driveshaft. I was looking for a new ring and pinion set ( if the rearend is rebuildable ) and I was wondering if...

someplace just started making them. AMD i believe. not cheap though

bump - car was off the market and i decided i need some money to finance a new purchase ( 300 srt8 ) It is still available, $2300 or make an offer. money talks. it will be in the car coral at the nats if not sold prior, or can deliver to the nats.

I just tried unplugging the harness behind the kick panel, and the fuse was fine. So its gotta be in the wiring or the sockets. Im thinking maybe the wiring since I put my cage in and some wires were dangerously close to the weld and lots of sharp objects. Thanks for the input guys it is greatly...

hey guys I had a question about my brake light fuse. Everytime I install it, it blows. I have found no open wires, and I am kind of lost at this point. What all does this fuse control ? I figured its the brake lights and dome light, but I can hear a relay click behind the dash as soon as the...