Search results for query: *

Anyway to slow down these paint cracks and prevent them from getting bigger on the Fastback near the quarter window? Maybe fill with some kind of epoxy to prevent water/moisture from getting under the paint? Thanks, Josh

1967 Plymouth Barracuda Fastback $16,000 OBO Originally 273 4 Barrel 4 Speed Console Car Motor- Great running 318 Bored .030 with Edelbrock intake and new Edelbrock 650 Carb, Hooker Super Comp Headers with 2 ½” exhaust, Pertronix ignition, changed to newer style water pump and 4 core...

I have 4 14x6s wheels and want to put a 245 60 R 14 Tire on the back. Will they fit or do I have to have at least a 14x7" rim? They are Cragar SS Wheels. Thanks, Josh

Does anyone know if the Small Bolt Pattern 14" Cragar SS wheel will work with a SSBC or Scarebird front disk brake conversion kit? Just wondering to keep the small bolt pattern. Thanks, Josh

What is the max wire gauge you can put through the factory bulkhead connector? This is on a 67 Barracuda. I just bought a painless wiring extra fuse box that I would like to install under the dash. I need the 12 gauge wire to go to the battery and I would like to route it through the...

Hello All, Just wanted to share my glove box stereo install. I still wanted to be able to put things in the glove box so I made a custom mount. JVC and 4" Speakers. Speaker mount under the dash. Glove Box Out Mount Glove box all hacked up. I used really stiff...

Hello Looking for a pair of black sunvisors going in a 67 Barracuda Fastback. Not sure if other a-bodies will fit...? They dont have to be perfect, just driver quality. If they are a different color I can paint them. Thanks, Josh Im in Denver Area.

Hello, Anyone have a BLACK arm rest for a 67 barracuda? Doesn't have to be perfect just driver quality. I think 67-69 barracuda will work...? Thanks, Josh

I just need one of these pieces. Goes on the rear deck lid for a 67 Fastback. I do not need Mint condition, just something that is good for a driver and does not have a lot of dents in it, I can repaint the stripe if that is faded. Thanks, Josh

Is the trim that goes on the deck lid the same for the upper and lower? (The long chrome strips) I know they use different clips for install. Just wondering if they were both the same pieces. Thanks Josh

I am installing 1968 windshield trim on my 1967 Barracuda fastback. Will I have to drill holes to mount the clips or how do you install the clips? I know I must install the clips before windshield/gasket goes on, just wondering how they attach to the body. Thanks! Josh

Looking for a 67 Barracuda front turn signal lens that is not cracked. I don't need the whole assembly, just one plastic lens. Also, for a Barracuda fastback, i'm looking for the interior courtesy light socket holder. Its the plastic piece that holds the bulb on the side metal piece. I...

67, Barracuda The fuel, temperature, and oil pressure gauges all max out when the car is on. Is this due to a faulty voltage resistor and or ground? Also, if that voltage resistor is not hooked up to the back of the fuel gauge can that distroy all three of these gauges? I think I may have...

Is the input seal the same as the front pump seal? If not, where can I get a front input seal? Napa has theirs listed as front pump seal. Checker doesn't seem to know what i'm talking about. Thanks, Josh

Where can I get this connector that is attached to the fuseable link wire. This is the wire that goes from the starter relay then connects to the fuseable link wire and then goes to the wire bulkhead at the firewall. I know I can get the fuseable link wire, I am just looking for the connector...

Just wondering if there are any tricks to removing the doors on a 1967 Barracuda. Do the fenders have to be removed? I know this is a two person job. Doors are coming off for paint. Thanks for the help. Josh

I know no one makes a reproduction trunk extension for 67 Barracuda, but has anyone had luck getting one from Layson's or Year One and making it fit for their Barracuda? Or is it better just to fab one up? http://www.laysons.com/Catalog.cfm?nCatID=1369&nModelID=3&nModelYear=1967 Thanks, Josh

I searched through many old forums but couldn't find anything. My 727 Auto transmission leaks real bad where the drive shaft yoke slips into the transmission tailhousing especially when im parked on a hill after ive been driving awhile. I've replaced the rear output seal and that didn't help...

Hi all, I just got my quarter panels delivered today from Goodmark and I have to say the packing job was a joke! The quarters were not separated and just thrown in a huge box with one small piece of card board between them. One of the quarters has some dings and what not. Just wondering if...

Anyone from Denver area recommend an auto body shop? I need new quarters, and paint for my 67 fastback. I remember someone here recommending a shop but I cannot find the name. Thanks, Josh

The plastic guide that slides on the metal rod broke. I tried to glue it but it came apart. Can i buy the plastic roller somewhere? I looked on RT specialties and couldnt find anything. Also, where can i buy the window felt for the quarter windows? Thanks guys

I ordered a new idler arm for 67 barracuda and the shaft on the new arm (the one on the left in photo) is too long. Did anyone else have this problem? Autozone had the exact same part as ESPO sent me....?

I searched the forum and couldn't a good answer. I bought a new front end kit and I got the one piece strut rod bushings. My question is how do they go in? Should I order a the two piece design like the old ones I pulled off? This is the new bushing design I got. Thanks, Josh

Can anybody tell me if this is the correct main parking brake cable? I just installed a new left rear parking brake cable and now it seems that my parking brake is on, but it is not, and I cannot get my drum over the shoes. The main parking brake cable adjusting screw is all the way out (see...

Where did you guys get your self brake adjusting hardware from?? I searched everywhere for 67' 10" rear drum brake self adjusting hardware... everything seems to be for 9" brakes..? CSK online has the hardware kit it says for all sizes, but the cable is too short.... Thanks, Josh

I just swapped shoes/springs/cables, on my rear 10" drum brakes (67 barracuda). There were a bunch of parts missing, including the parking brake cable, and I think i hooked everything up right, but let me know if i didnt... Now, the drum wont fit over the shoes without the self adjusting screw...

The whole window, window channel, and the small triangular window vent slide down an inch when i try to put the window up all the way. The window channel that sits on the adjusting rod in the photo moves when the window is up all the way, and i know its not suppose to. How do I get that...

Hey all, im a jeep guy (at least its mopar), but I recently picked up my first A body, '67 Barracuda fastback. Had the 273 and 4 speed, but i guess it blew up a while ago, someone dropped in a 318 with the 727. I am new to these and already have learned a lot on this forum. Thanks so much...