Search results for query: *

I need a used fuel gauge to fit a 1974 Duster please.

Where does the thick wire coming out of this alternator SUPPOSED to go to in our 1964 273 ? We are replacing the point style with electronic ignition package. I could swear I took the other end off of the positive side coil, All the wiring diagrams show it to go to the voltage regulator by way...

I need a complete automatic kick down linkage that will work on a 74 Duster with a 904. We are running a 72 318 with a Edelbrock 1406 4 bl. We also need the passenger side outside lock to internal lock mechanism link. If you happen to have the throttle cable we will buy that also. We need it...

... so the only thing I changed today was the thermostat in my sons 74 Duster. Went from 180 to 195 for the winter. We were having hesitation problems all along in this 318 auto 2 bbl from a 72 Challenger donor car. No more STUMBLING. No more HESITATION. OEM is 195, guess that’s what they need.

I was helped out today and gifted the parts I needed for our Duster by a total stranger, who I evidently helped out. He remembered me and after talking and re-meeting I recalled him also. We talked briefly,as, I was working. Today the parts I needed were on my front porch. I had given my address...

We need the throttle bracket and cable and linkage to a 904 from a 318 two barell out of a 74 Duster.

I have tried every shade tree trick I know of on GT. 1964 273 4 bbl 4 speed. New points adjusted to .017 , and again. Solid lifters , adjusted 10 intake , 20 exhaust. ( I guess those arms line up with spark and exhaust ports , and , does the gauge need to clear it ALL. Or just the 'edge'. )...

I need a fuel gauge , and the left tail light bezel for a 1974 Duster. Thanks.

hey guys , the motor mounts I need to replace in the '64 Dodge Dart GT , 273 , are WAY larger than the 2266,s they sold me at a local parts store. I have looked and searched. There are a couple of larger sizes on eBay that fit a lot of models from 67-76. They look similar , but not exact. I...

http://m.gofund.me/77kj9ebk

Either I have very good eyes, or very bad, but, what is up from what seems to be a leak of liquid coming out a new Accel coil ? Coil did seem to be rather hot to the touch. Jeez.

Is it normal to see the crank pulley move in and out slighley while revving the motor ? I have double checked the tightness of the dampner, the 1 1/4 bolt, seems tight.

I need a throttle cable bracket for a 318 two bbl. This is for a 72 318 out of a Challenger that I have installed in a 74 Duster. I'm sure many other years and models would work. Thanks !

Can someone look and see where the oil send unit is on a slant please. I am re-wiring after a v-8 swap. The grey wire is MIA.

Is a 904 the same regardless of application from E-body to A-body ? I have found a 318/904 out of a 72 Challenger. Will the trans bolt up to my stock 74 Duster trans mount.The Duster was running a 225/904. Thanks, Rick

I need a driver side tail light bezel for 74 Duster, driver condition. Thanks

I am looking to buy a complete 7 1/4 to fit my 1964 Dodge Dart GT. I want one from someone who replaced with a good limited slip, or ?, and rear end was working well without noise when taken out. ( oh, by the way, does anyone know what year models are compatible ? )THANKS, Rick

Hey guys/gals, I need a good running slant six for my sons' 74 Duster around Texas. Thanks

...must be reasonable, son was forced off road and ended up in ditch. ( or so the story goes ) Anyway, we have a bent lower control arm. This is a low budget car so sound condition only is required. My son will be doing the work with me watching on. PM please, THANKS !

Does anyone sale a front brake drums for a 64 Dart anymore. I get rears and rears and rears. 9 by 2 1/2 needed.

Did the '64 Dart come out of the factory with 9 inch 2.0 width for brakes in front, or 2.5's ? Maybe it's all about the model/engine ? I am trying to order up new parts, and NAPA and O'Reilly's both carry the 2.5 for the front. I KNOW I have been replacing the 2 inch all around for YEARS. WTF...

I looked at other threads. No, mine does not have C clips. My axle pulled out freely after undoing the four retaining nuts on axle flange. Luckily the sealed bearing was in great shape. The Seal was difficult to get out, as the pic depicts. AND THE CORRECT SEAL FOR MINE WAS # 484058 ( National...

May consider buying cluster if the temp gauge works.

We have put a brand new Holley two barrel on our '79 Super Six set-up, ( in a '74 Duster ) . What is the correct CHOKE to put on it. Will the ones listed for the Carter two barrel work ? Thanks, and my best regards...

Ok, somebody remind my if the long lining of the brake shoe installs to the front or back. I am getting a little short of memory in my old age.

It's my birthday.

Hello friends ! I have searched the threads here and on the more appropiate 'ForB-BodiesOnly' site, and cannot find out what intake manifolds might interchange with the 318 poly engine. We have a leaking passage in the exhaust crossover of my son's Belvedere. Any input would be great...

Hello friends at For A-Bodies Only ! Does a closed crankcase ventilation hose, and the vacuum advance for the distributer have to be plugged into the carb ? Can they be ran to a intake manifold fitting instead, and get proper results ? Thanks, Rick

Well, they wanted "about" two hundred dollars labor to replace the windshield in my son's '63 Belvee. Being "about" 200 short, I decided to do it myself. 1) Taking the trim off was easier than expected. Most of it screwed-off except the outside top and bottom pieces. I fabricated a trim tool out...

Hello ! Will a faulty mechanical fuel pump leak fuel into the oil ? Thanks, Rick