Search results for query: *

Every now and then I get to brag about my Vacuum Operated Exhaust (VOE) mufflers I built (and am still building). I just got done with six pair for Pontiacs and I test them on my '69 340 Barracuda 340-S. While my set was off for testing these others, I shot a few photos of them to share...

I've had this a long time and it is time to let it go. It is the DC deep pan for 904 series trans. You can tell someone was not careful and did not protect the surface when it was on the jack once or twice. It is the pan only; no filter, no adapter, no extension, no bolts or gaskets or even...

It is basement cleanup time again. I have had these rods around here since 1980 and it is time to admit I'll never be needing them in my 340 since it never gets driven. These came from the original engine in my 69 340-S Barracuda. I used five of the bolts for some work I did on another set of...

Folks, what did I screw up? My page size for this site is huge. I can't see it all from side to side. What did I accidentally click?

Another member gave me this part and since I do not need it, thought I'd offer it to others. It has a 1966 date mark on it and as you can see it is flat but is corroded. I very lightly blasted it to verify it had no holes in it. But, since I can not guarantee its lack of porosity, it is yours...

Not sure who shared it but thanks for the tip for the good deal on the wiring poster from Classic Car Wiring. Got mine today and it is awesome. It was 25% off for the 4th. Tom

I have three remaining Direct Connection glasses from the set I bought back in 1976 or so. These are nice and not damaged in any way. Before I accidentally break them, I'd rather let them go to another collector. I am in 64086 and for $15 each, I'll carefully box and cover their expensive...

This will show you where my VOETOM came from, the car that started and eventually ended up with the muffler I build, and you can see the display I made for the VOEGTO at MCACAN in 2021. What a cool car, awesome exhaust, and fun project!!!

On this ~ five-year anniversary of the release of CarTech’s Chrysler TorqueFlite A-904 & A-727 Transmissions: How to Rebuild, I want to thank all of you who bought it, read it, commented on it, and are using it. It took a while to write and photograph images for it but it has proven to be a...

Cleaning out some unwanted things and came across this unused, not-played-with 71 Cuda. I think it is likely worth around $25 and I'll split shipping to anywhere in the USA if someone wants it more than I do. Thanks! Tom Hand

I've got an owners manual, two brochures, some printed option data and the one page ad from most magazines from 1969/1979. ITs all in great shape and all is for the 1970 Dart. I'm in the KC, MO 64086 area code and I think this is worth $25. Shipping may be $8 or so but I'll split it with...

I've had this a while and no longer need it. I think it is from around the Prowler time. Others may enjoy it more than my basement storage area does. Likely it needs a battery as I have never even tested to see if it works. I'm in the KC, MO 64086 area. I think it is worth $25 and shipping...

Any of you have a shop manual for a 1987 4 WD Dodge short bed truck? Our nephew has one and it is terribly high and he is ready to lower it. I'd like to see the manual to see what it looked like stock. I can't figure out how they raised this thing 4" in the front. I see spacers in the rear...

Here is the real car from the 1970 Super Bowl commercial running the new VOE mufflers we have been making. I know it is not an A body but I run these on my 69 Barracuda so it sort of fits in. I know you all can appreciate such a unique car and it was awesome hearing and seeing it live.

If any A Body folks are at the Muscle Car and Corvette National show this weekend in Chicago, please stop by to say "hello". (I am bringing five of my TorqueFlite books if anyone needs one and wants to avoid shipping costs). It is not a MOPAR, but I am honored to be able to be in/at the 1970...

Got a good pal here in my area that swapped his low mileage Wide Ovals for some radials. These have been inside on a 70 Chevelle their whole life and they are soft and show little wear. Best we can tell, they have around 1500 miles. Date code looks to be from 2007. These would make great...

Have I got a deal for anyone needing almost new Magnaflow mufflers! I removed these and installed a set of mufflers that actually muffled a big Chevrolet powered 57 truck. These have about an hour of run time on them. As typically done, the custom fabricator welded the inlet on and welded...

Just had to get a new one finally today from Firestone. Original one lasted from 1979 till 1995, next one from 95 till 2003 or so, next one from 03 till 2010 and this one from 2010 till 2021. Glad I bought that battery!

Just went through a name brand 727 (that had several issues) and thought you all might enjoy seeing these. It would have been a few more hours of use and this 727B would have lost all forward gears. It is pathetic that this was assembled without inspecting the ring grooves in the input shaft...

Cleaning up and found this horn button assembly. i think it is 68 or 69. Anyone need it? $25? Plus whatever it might cost to get it safely to you? I am in 64086 zip code.

Today is your lucky day if you need a 1970 Dodge Service manual copy. I am cleaning the basement again and want this to go to a person who needs it more than I. So, the first one who covers shipping can have it. I bet it will go in one of those USPS boxes that is around $15 or so to ship no...

I bought a lot of these back in the early 1980s and found this one I had stored. figured you all could appreciate the importance of the tag and the signature of the guy on it! i

Hello all, I would like to know if anyone on here has some OEM NOS key blanks for my 69 Barracuda. I can find them on Ebay but wanted to buy from one of you all if you have them. Please let me know and thank you! Tom Hand

Good day all. I bought this two years ago for a pal who sold his car. It is a very nice copy of a 1970 Dart/Challenger shop manual. The photos are way better than the copy i just paid $50 for and in fact, these look almost as good as the originals (I still have my 69 original). I would prefer...

I bought these around 1981 and ran them with the raised white letters in for the few months they were on the car. I just cleaned the blue covering off the white letters in July and they look pretty good! They have around 2500 to 3000 miles on the Es and 2000 on the Fs. They were never in the...

Check out these cool ads from my 1971 B&M Catalog. Let's you know how it works.

Group, I have had these tires since 1980 and they have been on my 69 Barracuda for a short time only. They have been stored in the basement so they are not damaged or cracked. They are still soft and look great. I had F70-14s on the rear and E70-14s on the front. I never cleaned any of the...

I bought these for a relative and they were not loud enough on his catalytic converter-equipped car. So after fifteen minutes of run time, I got them back. I cut relief slots in the inlet and outlet bushings to allow ease of installation. The owner still snugged them a bit and deformed the...

Been storing these decals for years. Clearly some big names used Fram back in the day on their super stock cars. I have several sheets of each. Each sheet is around 8" by 10". Anyone need a sheet of them worse than Ido? It'll cost more to ship them but I'd like $1.50 per sheet and I bet it'll...

Noted Slant Six expert Doug Dutra's new book is soon to hit the stores. Watch for it in early February or possibly sooner on-line. Please go to Cartechbooks.com for more details.