Search results for query: *

Here's a couple of electronic ignition tune up parts for that trusty little slant 6. Standard brand replacement item's have the original packaging but was removed and never installed. $10 plus shipping from Bristol Tn. 37620 Thanks FABO

Here's a nice set of twin post mirrors, for their age, that would be at home on a driver, cruise night or local shows. They have the usual small specks in the chrome and a few blemishes as seen in the photos, but look nice outside in the sun. The pivot on both are still snug. They do not have...

273 style that is a true 90°, but works on any small block. 90° oil filter adapter with a good bolt, no twist. $75 plus shipping from 37620 Bristol TN. Thanks

273 style that is a true 90°, but works on any small block. 90° oil filter adapter with a good bolt, no twist. $85 plus shipping from 37620 Bristol TN. Thanks

Early A body V8 273 or 318, maybe 340 with washers under one bolt, I've never tried that. I won't be using these so you might as well. Also the 90° oil filter adapter with a good bolt, no twist. All for $150 plus shipping from 37620 Bristol TN. Thanks

This will get you started on converting that early A body to a V8 273 or 318, maybe 340 with washers under one bolt, I've never tried that. I won't be using these so you might as well. Also the 90° oil filter adapter with a good bolt, no twist. All for $150 plus shipping from 37620 Bristol TN...

CAT brand bronze gear to press on your big block shaft. Save that roller cam. $45 plus shipping from Bristol Tn 37620

I've got a couple of spindles that I picked out of someone's dead pile. But I don't know if they can be identified, maybe from dimensions. I tried to find a casting number but I can't find one. They are 10 7/8 rotors and of course big bolt pattern. They have a lower steering arm with a tapered...

....price drop $60 plus shipping... Here's an alternator armature that I had pushed back in my stash. I'm not sure of the Amp rating but there is a legible part number on the box, if that can be tracked down. $60 plus shipping from 37620. Thanks FABO

Now that gas prices are taking their tole on the car hobby, those earth rotating gear ratios gotta go. Here's your chance to go crusin' by those gas pumps. A nice set of 2.94 ring and pinion gears with a great wear pattern for your 8 1/4. $40 plus shipping from Bristol, TN 37620

I thought someone might need the sure grip out of this F body axle. $250-sure grip only $275-with 2.94 r&p $325-you can have it all All plus shipping, just so you know, the last complete axle i shipped was over $250 freight across country and a pain in the butt to skid. The spring perches are...

I thought someone might need the sure grip $250 out of this axle, with 2.94 r&p $275 or you can have it all for $325. All plus shipping, just so you know, the last axle i shipped was over $250 freight and a pain in the butt to skid. The spring perches look like the isolator style and are 44 3/4...

I don't see my self doing any more big block projects so here is a set of pulleys. From an ac ps motor in great condition. I primered them thinking I might use them. $40 SHIPPED in the 48 from Bristol, TN 37620. Thanks FABO

Does anybody have an A body upper A arm you could measure across the top at the steel flanges? I want to confirm the ones I've got are good to go. They are extras that I didn't pull myself, so I wanted to make sure.

I've rebuilt a 727 and put in as much fluid as the torque converter will hold. It also has a dry external cooler. I've added 3 quarts of fluid and the stick already reads full. When I'm ready to start it, should I pop a couple more quarts in ? Because it's a new motor and I'll be busy with...

From what I read here at FABO it looks to be a 68-69 correct? ...and it takes a special block with extra threaded bosses on the driver side front? I know pretty much of nothing when it comes to factory BB A bodies. I got a K member in a package deal with some other stuff. Its been chopped for...

This gets you one step closer to that big block A body swap. A 187 oil pan, not a concourse item but in very usable condition. A previous owner has dollied the bottom of the sump a little. Looks like the usual denting that a 45 year old pan gets. I have a pickup tube but I'm not sure it's the...

This is a complete, as removed, 8 1/4 open rear axle. Comes with usual patina from being stored under a Mopar. Someone has installed a set of 3.55 gears for your acceleration pleasure. I acquired this from a parts swap so I haven't had any road time with it personally. Gears look great, brakes...

I just saw this on FB, anybody have any insight on them?

These are what's left over from a 65 gasser project. I have both sides, and some bits. The chrome strips are pretty speckled but it's all in useable condition. $40 plus shipping for all, from Bristol Tn 37620. Thanks FABO

This is a used reproduction shroud (not sure who made it, can't read the sticker) so it's not had the abusive life of an original ! Just some scuffs, no chips or cracks. Well made and sturdy reproduction. Classic Ind. advertises this for 70-73 B & E 22" radiator. $80 plus shipping. It will be...

This is a very presentable grille, a good driver or local car show quality grille. Someone has already done a casual refurb. When installed most imperfections would not be noticeable. A little more TLC and it would be a fine grille. It won't win you a Riddler. I've tried to show all the stress...

These are in pretty good shape. There are a few road dings, mostly in the driver side. I've tried to show in the pics. These are the argent finish. $60+shipping from Bristol Tn. 37620

I got this unit in a trade so I don't know it's full history, but it seems to be in good condition. Gears look good. 741 case, open with 3:91 ratio. Toss this one in for a quick and cheap pick me up. Be a star with the one wheel peel crowd! Now...this thing weighs 70 pounds, shipping would be...

I thought I would ask here first, this great community seems to have some of everything. I'm looking to convert from a small block to a big block in my '79 and I'm to the point of mounting the power steering. I've investigated all the different mounts. The one that seems to be it, is like the...

This is the emblem that goes in the cutout in the center of the grille. It's in good condition, the chrome will polish up good , very little pitting on the back edges. The colors need repainting. The studs holding the triangle on have been trimmed by someone to remove for cleaning and painting I...

From the archives of "the build that didn't happen" I have a set of dual MP valve springs good for .500-.610 lift. These are the real deal from Mopar. New in the box, ready for your small block. $100 shipped by USPS lower 48 from Bristol, Tn. 37620

73-74 Head light bezels, no dents, nice drivers or polish them up for the shows. The matte finish around the light opening needs redone and the anodized is worn through in a couple of spots on the front edge. All in all they're in pretty good shape. $40 plus shipping from Bristol, Tn. 37620

I have a factory rebuilt points type slant six distributor that i got with a bunch of dealer parts. It has new points, condenser, rotor, plastic drive gear and electric lead. It's been stored for a while so there is tarnish spots on the alum housing. Spins free, points open and close. $25 plus...

From the archives of "the build that didn't happen" I have a set of dual MP valve springs good for .500-.610 lift. These are the real deal from Mopar. New in the box, ready for your small block. $140 shipped by USPS lower 48 from Bristol, Tn. 37620