Search results for query: *

I have finally got my 3.6 V6 installed into my Valiant with an American Powertrain Tremec 5 speed! Hopefully in a few months it will be running and driving!

Selling my 1980 Plymouth Sapporo! The car is located in Santa Clarita CA. Here is the Craigslist ad: 1980 Plymouth Sapporo 5 Speed RWD Amazing Condition

Hello, we need a lower trunk trim piece for my wifes 1967 Barracuda. She got rear ended and the car has been repaired but the lower trunk trim piece was damaged beyond repair. What do you got?

I am selling my 360 out of my Plymouth Valiant. This is a well built LA series small block that was done by Burbank Speed and Machine back in the late 80's. I put it in my car back in 2010 and it went 12:80's at 104 mph at Mopars at the Strip in Las Vegas that is without the supercharger. This...

Here is a new in the box AAR fiberglass 6 pack bolt on hood for a 67-68 Plymouth Barracuda. Part # 1071BOH This has been in an un-opened box in my garage since 2005 so I got all of the spiders out and dust off to take the pictures and found a very small 1/2 long crack in the scoop area. I was...

Here is a new in the box AAR fiberglass 6 pack bolt on hood for a 67-68 Plymouth Barracuda. Part # 1071BOH This has been in an un-opened box in my garage since 2005 so I got all of the spiders out and dust off to take the pictures and found a very small 1/2 long crack in the scoop area. I was...

A friend of mine just bought a clean 67 Valiant 4 door with a slant 6 and factory a/c. Everything is there except the compressor and the bracket. Anyone know what modern compressor will work and who might have a bracket?

Here is a complete set of factory adjustable small block rocker arms with shafts and pushrods. They are in great shape just clean them up and install them. I am in Newhall CA and would like to get $160 for them + shipping. Thanks for looking! <a...

Here is a killer deal on a Compu-Tronix distributorless ignition system. I had this setup on my Valiant for years and it is great! Super easy to setup and you get that modern reliable coil pack setup! This sells new for $599 with plug wires so I am letting this go for $350 but you will need to...

Start: $400 - Finish: Mean Green MOPAR: Violent Valiant - /BIG MUSCLE - YouTube

Start: $400 - Finish: Mean Green MOPAR: Violent Valiant - /BIG MUSCLE - YouTube

I am considering installing a 6.1 Hemi into my Plymouth Valiant and I have the new Borgeson steering box, has anyone fit one in with this setup yet?

Here is a like new Flaming River Manual box out of my 69 Plymouth Valiant. This unit is in great shape and only has about 5000 miles on it, it is much better then the stock Mopar manual box with much better road feel. I switched to power steering with a Borgeson box so I no longer need this...

I am considering doing a 5 speed swap into my 69 Plymouth Valiant and kinda want to do it junk yard style. What Tremec trans is best to look for? Should I go with a stock mopar pedal assembly? Any tips would be great, I want to start getting parts. Thanks, Shannon

Hello, I am getting ready to put my wifes 67 Barracuda convertible back together and would like to find some decent headlight bezels, willing to barter for some instrument panel work. Thanks, Shannon

Redline Gauge Works is offering a 10% off summer special on all gauge cluster restorations. This offer is only good until the end of October so get on it! Redline offers the highest quality instrument panel restorations for your Mopar and they are the innovators of amp to voltmeter conversions...

Trying to find out why you cant use a factory power steering box with a new gen Hemi install. What hits and where? Any pics out there? Thanks,

Has anyone attempted to put an SRT-4 Neon motor into an A-body? I think you can use a 5 spd trans out of a Dakota. It would be cool to put one into a 63 Valiant 2 door and set it up for autocross, I would think it would be dialed! The 2.4 turbo can make 350hp all day and still get 30 mpg on the...

Best power for the money and easiest install!

Redline Gauge Works is having a crazy recession buster discount on all gauge cluster restorations till the end of the year! Give them a call at (661) 259-8891 ask for Shannon or Andy.

I have a killer PTC 4500 10" stall converter for a 904 with zero balance. I would like to swap someone for a 10" or 11" 2500/3000 stall. Need to do this asap so it would be great to find someone local. My car is at Vortec getting there new Paxton blow thru supercharger and the 4500 converter is...

Here are some shots of the 360 in my 69 Plymouth Valiant from Vortec Superchargers. They should be doing dyno testing today!

Will these fit on a 67 Barracuda Front and Rear? http://www.summitracing.com/parts/CRR-3425812/ I have already converted the car to the large bolt pattern. I can also get these with a 4.75 back space. I would like to be able to rotate the tires. Thanks,

Rad!

Check out the newest issue of Car Craft for a complete write up on converting my 69 Plymouth Valiant to a canyon carver using the Hotchkis TVS setup. This is the best bang for your buck suspension setup you can do with real performance! http://www.hotchkis.net/index.html?Vid=27

I just finished a rear disc conversion on my 69 Valiant with an 8 3/4 rear end. I used a kit from Right Stuff and it all went together very easy. It makes a super loud noise when you apply the brakes normal, when I hit the brakes hard it is fine. It so freakin loud it is embarrasing. I have...

Anyone consider swapping a 4.7 V8 into an A-body? We owned a Jeep Grand Cherokee with this engine and it ran bitchen with a lot of power. I remember when a magazine ran a Dakota comparison 4.7 vs RT 360 and the 4.7 beat it everytime. Just a thought?

Just drove my newly converted to Pro-Touring 69 Plymouth Valiant at Willow Springs Raceway the other day. The Flaming River manual steering box is killer! It is a little on the stiff side so I would not recommend it for a girly man! hahaha. I loved how it felt on the road course and I just got...

Just finished a day at Willow Springs raceway with the crew at Hotchkis suspension and my 69 Plymouth Valiant. The guys at Hotchkis used a Disc Brake conversion kit from Right Stuff. http://www.getdiscbrakes.com/RightStuff/Default.aspx Cory from Hotchkis told me that the conversion was a total...

Anyone install Baer brakes on there A-body? I have a 69 Valiant that is being converted to a pro touring setup and it is going to get 4 wheel disc brakes and a complete Hotchkis setup. I am planning on running some 17 inch wheels so does anyone have a good idea what the offset should be front...