Search results for query: *

Edelbrock #1405, manual choke model 600cfm AFB. Still have the box and instruction manual. Bought this carb new a couple years ago on Summit for over $300 and used it for rebuilt engine break-in plus maybe 500 miles. Then switched to an AFV, so time to sell this one. Only thing is, the fuel...

Selling my pride a joy! Originally a slant 6 car it has a 360 LA and 727 now. Schumacher motor mounts for the swap. Car is a very well taken care of almost entirely rust-free California car. Spent time in the PNW (Portland/Vancouver) area for several years but was always garaged. Had it for 16...

My steering column has a little bit of play back and forth. A friend of mine who helped me work on it last year said it's probably missing a clip. I found a clip and he's sure that's what's missing. I looked through the service manual and I can't find a pic of this clip anywhere. Does anyone...

A friend of mine has a 1971 GMC K25 truck with a 350 & 4bbl Edelbrock. Needs an air cleaner. Does anyone have a factory GMC/Chevy air cleaner for this vehicle? Thanks.

Looking for an OEM or NOS ignition switch for my '71 Dart. Must be in very good condition. Would prefer NOS.

The Dart has been running so good since the engine rebuild that this is a head-scratcher. A little bit of info -- 360/727 stock rebuild nothing high performance. Manual choke (which is open all the way except for when I first start it up in the morning). Mechanical fuel pump. New Edelbrock 600...

Car is a '71 Dart. During the course of my heater box repair I lost 1 of these clip things that goes onto the door lever and connects to the end of the cable. Anyone have an extra one they can put in an envelope and ship me? Thanks.

Selling a '71 ECS ('70 CA) gas cap, filler neck, and vapor canister. All are in very good shape with no rust issues. The gas cap could be sanded and repainted. Asking $200 shipped for everything.

Heater core leaked so I had to pull the heater box. I had to do some significant fiberglass repairs as you can see in the pic to where the motor plate mounts to the box. I have the holes drilled in the fiberglass repair and am going to use little screws/nuts to hold the motor to the box. I've...

My 71 dart has the 71 ECS or whatever it's called gas cap and filler neck. I am swapping out the gas tank soon and at the same time I'm switching filler neck to the 72+ style so I have the more common gas cap. I took a close look and noticed something though. See pics below. This is a '75-'76...

I had to remove my heater box due to a leaking heater core. I forgot the last time I had this box out it was 12 years ago roughly and I did some quick-fixes. I need to spend time doing fiberglass repairs, painting the flappers, and adding new seals. In the meantime I need to drive the car. I...

Driving home from running errands the heater core started dripping. 1971 Dart 360 (rebuilt motor recently) and my radiator was re-cored a few years ago. Cooling system in good condition but original heater core. Probably just age caused it to finally fail. I've only removed the heater box out...

I am ordering new tank-to-pump fuel line for my 71 Dart since I am installing the new gas tank. May as well go 3/8" right? Question is whats the difference between fuel line on a 71 Dart vs 72 Dart? When I look online they show either fuel line for 69-71 or 72-74 I ask because I am using a 72+...

OK here's a little back story and info as to why I am doing this. This is my 71 Dart with a 360 that has maybe 1k-2k miles on it since the stock rebuild. I've had a minor yet annoying issue with the car since it's been running. At cruise (I can only tell when cruising on the freeway), on...

Guys, I'm taking the top off my Edelbrock AFB to adjust the floats and clean the needle/seat. While I am at it I also want to remove the 2 idle mixture screws to clean out the idle circuit. I don't have access to compressed air right now but I do have a spray can of carb cleaner. Can I just...

Friend has been preaching this for years. Wanted to see if anyone has tried it. I currently have chest congestion/head cold. I'm not bed ridden or anything and I'm able to work. Just an annoying cold. What he says to do is to "sweat it out" by doing the following. Take a bunch of vitamin-C...

...we need to stop for a second and be thankful that at least these aren't Euro cars of the 60s and early 70s, for more reasons than just cost. My girlfriend's car is a 1969 Porsche 912. It's beautiful and well taken care of, but guys, I've never seen such bad engineering. I hate working on...

I bought another '75-'76 unleaded filler neck from another member on here but there is pitting/rough surface where the grommet seals around the tube. I'm concerned about using it because it's a rough surface with pitting and I think fuel will leak out around it and/or cause fumes. Does anyone...

I am doing a fuel tank swap soon on my 71 Dart. From the factory it looks like there's nothing between the straps and the tank. Is there any point to adding anything? Such as these rubber liners? Pair Universal Tank Rubber Strap Liners - 24" long x 1 1/2" wide - SL24 | eBay The tank will have...

I need a NOS sending unit lock ring please. I have one for my new gas tank project but it got destroyed last time I moved :( LMK if you have one. Thanks.

My new Spectra gas tank came with a rust preventative coating. It's not waxy like cosmoline, more oily like LPS3. Whats the best way to remove this stuff without causing problems to the gas tank? For instance, if I use acetone, should I worry about the gas tank rusting after? Or are these...

I bought a used filler neck from a member here. Looks to be in pretty good shape. I will be installing this in the car when I swap out the gas tank. Anyone know what I should do about the surface rust on the front of the filler where you put the gas in? Should I just sand/steel...

Bought a new tank Spectra CR11E (1972+) tank. Have a few questions. First, see attached photos. See the copper vent line at the top? That line is hanging down an inch or 2 from the top of the tank. I don't really understand why. Is it supposed to be like that? I thought it was supposed to be...

I have a question on how water circulation works on our Mopars. The car is a 71 Dart non A/C. I am doing a radiator flush. Question--- do I need the heater ON to have warm water circulate through the heater core? I was under the impression since there's no shutoff valve on the heater lines that...

My car is a 1971 Dart which came with this breather stock: Mega Parts USA - Reproduction, NOS and Used Mopar Muscle Car Parts Notice the extra hose fitting for the fuel vent line. I lost mine and can't find it for the life of me. Does anyone have 1 of these laying around they can sell me...

What brand of front wheel bearings are we going with these days? Are all Made in China?? Also I forgot what year/model/make of vehicle do I look up to find the correct inner bearings, outer bearings, and seals? My 71 dart has the 11.75" disc brake upgrade. Should I use something like a 1979...

Looking for a door jamb switch for my 71 Dart. See pics. The nut is a 9/16. If you have one new or used let me know. Thanks.

I need a new speedometer cable for my 71 dart, the current one is done for. I measured the cable and it's approx 64" long. This is the same cable that was in the car when it had a 904 so it is the stock cable. It has the larger 7/8" end on it that goes to the transmission and the plastic push-on...

Can someone take a pic to show me where the trunk light is located? I need to install mine on my 71 Dart and I can't recall where it mounts. I know the switch mounts to the piece in the upper-right side corner of the trunk. Pics of where to route the wiring would be helpful also. Thanks.

New 18" throttle cable. Not sure of the brand. $20 shipped CONUS. I accept paypal just pay the 3% fees.