Search results for query: *

There is a video on YouTube, by Chris Birdsong (Junkerup), He replaces a roof skin on a factory sunroof car (2nd Gen Charger), I know it's not an A-body, but the premise is the same. Might give you an idea on the basics of what is involved.

No problem, glad you found one.

I have a nice 73 pass door without mirror option, no rust. I am in Utica Ny , $100.00

Simple EFI Conversion Fuel Tank for Mopars Here is a link to a complete fuel system upgrade with the tank you have. Of course, I don't know about mounting the regulator like they did, under the car.

What I did on mine, right or wrong, instead of welding perimeter of K-member, I took a spot weld cutter and cut only through top layer of metal in between factory spot welds, and then plug welded each of them. Then I installed the Firm Feel K-frame stiffening kit, and rewelded around motor...

They may not be correct, but I went to Home Depot and just bought some stainless screws. Cannot remember the size.

I am going to have to take off the 90 degree adapter on my 340/727 in a duster. I have Hooker super comp headers, there's just to many things trying to share the space, trans dipstick, oil filter . I guess the hot set up is the Canton racing oil filter plate, its like $70.00, you can get a...

If you look around here there is a few diagrams that members have posted. I used this one to convert my car to console shift.

Probably a long shot, but maybe someone has these. I have a 73 Duster 340 727, I have most of the parts for converting to floor shift. I am in need of Lower shifter linkage rod, and the gearshift bell crank lever that attaches to tranny. I can order new from Cl"***"ic Industries, but I would...

Drew, The power steering shaft, and manual shaft are interchangeable...

I changed to a manual box, and since I needed to rebuild the steering coupler, I just switched out the steering shaft for one from a manual steering car, that eliminates the need for an adapter. Bought the steering shaft from a member here, cheaper than the adapter..

I used one of the metal fillers when I did my quarters, not sure of the brand. Hell of a lot easier to sand/finish..

Wiper Motor - Front - Remanufactured Part # : RAY 49352 Product Line : NAPA Electrical Motors Important Info : Motor w/o Washer Pump;w/ 3 Speed Wiper Motor or w/ Variable Speed...

Napa sells re-man 3 speed wiper motors for like $100.00

Try to weld up the cracks, and install the bucket seat reinforcement plates. I bought some from Classic industries, but I'm sure they would be easy enough to make yourself.

There is a company called Fesler making flush mount glass for muscle cars. Looks like mostly GM and some Ford applications.. Maybe some other companies out there doing Mopar???

Don't ask me, possibly custom made? I've seen it done by the boys on T.V....Don't shoot the messenger... I didn't ask the question, I have chrome on my car...

I think you would install larger glass, installed like modern windshields, no gaskets, just urethane.

The headlight surrounds are 73, they have the mounting tabs...

These were on Facebook Marketplace, I have bought parts from him, decent guy.

There is a video series posted on here, it's for E-bodies but it basically shows step by step how to rebuild column. To get the lock plate off, you have to pop that outer sleeve/cover off, and you will see the pin. You have to be careful not to collapse the shaft during the whole process...

You can get the grommets from DMT for cheap, they are able to stretch over the speedo end. I just ordered, nice stuff!!!

I was just looking at replacement cables myself, a lot of the cables listed as "correct" for my Duster had the incorrect female end at the transmission, a lot are 5/8", my trans. is 7/8". Ordered correct cable through NAPA for like $20.00.

Maybe rebuild the coupler, while you have column out consider installing one of the E-16 bearings. Eliminates a lot of slop in the column, check it out in the "How-To" section..

Fish, I think Rumbles gonna take it, but you're next!!

(SOLD)Schumacher torque strap for LA engines, fits '67 up. This is brand new, been sitting in my toolbox for years, went with the QA1 k-member so I no longer need. $70.00 plus shipping from 13501.

Power to manual adapter, used only for mock up. I bought this from Firm Feel years ago, switched to a manual shaft, so no longer need... $60.00 plus shipping from 13501.

I sent you a message.

Sounds good, if you get a chance, not in a big rush.

I am in need of a manual steering shaft for 73 duster. Thank you!!