Search results for query: *

Make sure you also check the wiring running from the tank to the gauge. Meter them checking for faults.

I have been welding for years. If you brought this to me I would highly recommend that you not have it done. First off in order to weld this correctly I need to heat it first, then weld it and then you need to have it machined due to weld warpage. Here is the real kicker. Let’s say it...

And the mystery continues.

Spray carb cleaner around possible vacuum leak areas like carb and intake. If you notice a change in RPM then look closer for the leak. Also, have you confirmed your timing and advance? Good luck.

I didn’t want a lot of extra but just wanted a lot of bling. Here’s a stock 318 I built with intake, 4Bbl and serpentine kit. Before and after.

Please check out TKs Garage on YOUTUBE Buyer beware Spread the word about his videos. Very informative.

If your looking for everything in one kit go with March Performance. Here it is on my 318 and it’s absolutely awesome.

I used Led lights and wired them in behind the cluster. They make some that you can drill a hole and just push them in. Same with Bright indicator.

Do yiu have a pic you can send me?

If you still need a 318 PM me. Thanks

This would be a great time to cut your existing bumpers and brackets down to have them fit closer to the body. Then I highly suggest having Tri City do the plating.

I’ve been following your project for quite some time. Nice project. I have a 73 Dart Sport Check out our progress. Happy wrenching.

I bought a couple of led lights and wire them into the dash harness. You should be able to easily find a wiring diagram to help in this.

Asheboro NC Just south of the Richard Petty museum.

That sounds good. Can you send some pics? Thanks

Thanks for the info As for the shock mounts that issue was already addressed during the restoration. I am running a stock 7.25 rear. As mentioned in the initial post I used to run 14x7 chrome reverse. I never raised the rear real high and had to shocks to compensate for music equipment at...

Always spray a light coat over a black primer. Experiment with you technique and spray light even coats. After you get the best shine then spray it with clear. The idea is to actually spray a thin enough coat to let the black still take up some of the light refraction. No it will never...

I also have a Dart 1973 Sport. I used to have a Crager 14x7 or 8 in a chrome reverse. I would love to find that same wheel setup but unsure of the specs that would work. The car is stock and will have Air shocks on rear. You pretty much answered some of my question with the 4.5”...

Hello Supertruck Noticed your post about Keystones. I ran into the same problem. I do have a set but may use something else since they are not new.

We’re the springs moved inward? Thanks

Make sure whatever you decide to haul with and on has some type of brake for the trailer. Never a good thing trying to make a quick stop with thousands of pounds pushing you down the road or into a busy intersection.

Nothing but maybe a Dodge pulling a Ford put of the ditch. Just saying! Lol.

Post some pics when you have it done. Since matching up the speedo cable was going to be an issue and the fact that I wanted to keep the firewall clean as possible, I opted for a GPS speedo.

Thanks. That was interesting.

Oh I also have a funny story to share: I once in charge of technical service and warranty for an outdoor power equipment company. This guy who had purchased one of our machines called me just raising hell and hating everything about our company and the machine. I got him calmed down and told...

Yeah it always seems to be the simple things that throw us off at times. Just chalk it up to a learning experience.

Yeah I can imagine. I would be devastated if that happened to my engine. Check the latest pics in my FABO garage.

Okay. Thanks. Please keep us posted.

I was wondering how the repair went and is it finally running.