Search results for query: *

.030 440 with forged pistons, six pack rods flipped, .590 purple shaft roller rockerss worked 915 heads, fender well headers, J convertor built 727 with manual reverse valve body,8 3/44:56 gears spool 10.5w fits on rear. I would say that the front tires would need updating along with belts. Runs...

What other year dash will bolt into a 70 Dart.. The guy I gave the dart to would like to replace with a stock dash and does not care if it is period correct.

Turn key race car.... Not for the less of a man type for sure. 446, forged pistons, 6 pack rads, piston flipped, 906 heads with some port work .590 purple shaft aluminum roller rockers, tm7 intake with an 850 double pumper. Rodgers full built race 727 with a turbo action j convertor. Reverse...

.030 440 forged pistons, 590 purple shaft, worked 85 heads with roller rockers. TM7 intake with 850 double pumper. No rusted holes in this car. Has line lock, built727 with manual reverse valve bodym J convertor 4:56 gearsl, spiool with yukon axles, long wheel studs 8 3/4 weld wheels with a...

Do the green axle bearings move the wheel out any at all? I hear some say yes and some say no.

I am looking for the speedo non working is fine, radio bezel plate and glove box door. I will need screws as well. Rear and front windshield trim along with side emblems " Dart/ Swinger for both sides driver quailty as it is going on a race car. Shipped to GA 31820 paid with paypal.

Found this racecar under a pecan tree that has been doormat for 8 years... A little fresh fuel a carb cleaning and a hot battery and it fired right up. Allot of old janky stuff but a hell of a deal for the price I paid....496 with a 727 j convertor and 4:56 on 10.5w stock tubs stretched...

Good saveable little car.. About as bare bones as you can get. Was running but ran out of gas and now the starter has taken a dooky... Slant six auto.. Has floor pan issues and trunk pan but body is great with one little spot above tail lights. Good tires and the slots come with the car. New...

/6 automatic. Body is great needs trunk pan, floor pans. Butt ugly front buckets from something... Car cranks and runs well. New gas tank and carb rebuilt. I just do not have it in me to redo another one... I know the issues so this is why the price is as low as it is. Comes with a bill of sale...

Has the leaning tower of power. Zero rust car running and driving and for the high price of $*&**. 1971 model slant 6 with a 904. So what is it worth running driving?

Listing this car for a friend. .30 over 440,Indy SR aluminum heads, 630 lift mechanical cam, aluminum roller liftersm super victor with 975 Holley, TTI headers to muffled exhaustNOS kit with progressive controller, Purge system. Tublar a arms with coil overs on front, 90/10 Shocks, TCS Shifter...

Change my mind

Well here goes.. The factory switch is bad and I have a welded on steering wheel disconnect. So I was thinking if this was possible. Can I hook a toggle switch up for each side? How would this need to be wired up? Will I need 2 flashers? This is for my street car.

On my 67 Fastback barracuda. Passenger door frame fits the roof trim perfectly with an even gap. Driver side is hitting at the bend at the top to the trim pc. I found a nut with a slotted screw in the frame of the door at the front. Question is does this adjust that frame top in and out or what...

I have the bracket that goes to the windows but missing everything else. Would love to get the bolts as well. IM me please.

Is the rear 1/4 grass bracket that bolts to the glass the same on a fastback as it is on a trunk car?

Sorry for the caps but I am losing it on this car... My holes do not line up with the standard barracuda emblem and the extra holes you would think would be for the fish are at the front and the fish is in the way if the barracuda emblem would fit. Driver is towards the back and passenger...

1967 Barracuda front of the fenders on both sides.

I have 4 wheel disk brakes on my barracuda. Big bolt pattern front, ebay disk rear that uses mid 80's Cadillac Eldorado calipers. I have all new hard lines along with new hoses and calipers. No leaks but I cannot get a steady firm brake pedal. Pump them and they are good. Let it set and you...

My 67 barracuda has 74 Dart front disk and an aftermarket rear disk brake setup. All new, new master cylinder new proportioning valve new harn and soft lines. Her eis the problem and this is what has been done... So what would be next? I can bleed the brakes and get a good pedal. Walk away for...

I need one that says Charles Rogers Race engines & Cars it can be multiple lines like the name on top and Race Engines & Cars on the bottom. I just need a simple Black and White design. I am trying to make something for my engine builder for Christmas.

Anyone doing this , this year? If so I want in...

Hood hinges... Spring towards fender or body? I just need to figure out left and right...I have a 1967 Barracuda...

This is a project but a good one with a little work would be a great car. I have realized and so has my buddy that we are now in the 4th quarter of life and it is time to let this one day car go to someone that will enjoy it. I do not want to be that guy that never gets around to it and...

I am looking for pictures of the rear 1/4 window regulator setup on a 67 barracuda. A buddy picked up the parts for me and I have no Idea where anything goes. My car was a complete basket case when I got it... Thank you for any help.

I am putting them in for the first time since I had the car as they where out when I bought it. I have the two front connections done. One bolt and one nut on the lower stud. But at the bottom of the long chrome bar that goes into the door is a round part that looks like a door hinge minus the...

I am finally getting to the point of putting the glass back in the car. I am putting all new fuzzies as well but my car was missing them when I got it. There is a thick fizzy and a thin one and I do not know which one goes on the inside of the door. I am replacing front and back so here is where...

I was just given this motor. it was a warranty replacement as they said it had a bad camshaft. I have no idea of what year it may be. With it being a warranty covered engine I would think it is fairly new as it came out of one of our Police Cars.

Got the hood back from the paint shop and sat it on the car still a ways to go before I put those 14x32's to the test.

Anyone do one of these yet? Looking to put a 400 in one of these? Any pictures?Planning on a single turbo setup so header issue will not be there.