Search results for query: *

looking for a Small block bellhousing with a 4.80" diameter center hole, I have a stock aluminum one with a 4.35" hole I am willing to trade or pay cash Also have some truck 11" diameter clutch SB stuff (BH, flywheel,etc) I caould tade also Bob

this crank came with a 1973 340 I bouight in pieces, this crank was ground down .010" undersize on the mains, the rod journals were ground down to 2.100 " diameter X 1.900" wide to accept Chevrolet Large Journal sized rods, Rods with chevy sized large ends and Mopar sized small ends are...

this rear window from a 1967 Dodge Dart 4 door sedan is used but is in very good condition, it is a tinted window from an A/C car, price $75 OBO Location : La Plata, MD Trades considered , looking for a front windshield for my 68 Valiant 4 door sedan

this disc brake set up from a 1979 dodge St regis is used and pretty rusty, these are the 11-3/4" diameter discs, set includes, spindles, rotors, calipers, dust shields, caliper mounts, etc. pretty heavy so local pickup is most practical, location : La Plata, MD Price: $100 OBO

this set of axles from an E body 8-3/4 " rear are used but are in good condition, they have some corrosion from sitting around for a while, but can easily be cleaned up, bearings and seals replaced and used. or maybe have them shortened and resplined for you narrowed housing, Price $100 or best...

here are some more pictures

here are some picts from the car we went to today in my newest toy, the 68 valiant 4 door (plain white wrapper with a 340/4 speed in it!). First picture is of the Valiant, most of the rest are of mopars with some other interesting things thrown in, Bob

this Mopar 8 3/4" rear from a 68-70 B-body is used but is in good condition, has 2.76 ratio "741" open third member, OEM stock axles, drum and brakes, Local pickup only in La Plata, MD $200 OBO

I just scored a Glastek hood bolt-on hood (with 6 pak scoop molded in) for my 73 dart racecar. I need to locate and purchase some hood hinge springs that are light and provide less lift (to avoid overloading the FG hood and cracking it). Any ideas, leads or sources for these are welcome...

this black rear seat from a 1965 barracuda is used but is in good condition, usable as -is in a driver , or recover for show, local pick up in La PLata, MD is preferred or they could possibly be shipped vis greyhound at buyer's expense Price $100 OBO

this pair of black front bucket seats are used and are in fair condition, but the frames are in good usable condition, The passenger side seat is in pretty much usable condition for a driver vehicle, the driver's side seat needs to be recovered, Local pick up in La Plata, MD is preferred, but...

these rear windows from a 1965 plymouth barracuda are used but are in good condition. Local pickup in La Plata, MD , Price : $50 each or $75 for the pair. Bob

this 8 3/4 " rear came from a 1965 Barracuda parts car I just disassembled. It has a "741" case 3.23 open differential, OEM SBP (5 X 4") axles, and one brake drum, the housing and backing plates were painted by the previous owner, then installed in the car and it was left to...

this bench seat from a 1965 Plymouth Valiant is used and has seen better days. But if you are needing one for your early 2 door a-body, it has a very clean frame and springs (still shiny black paint instead of rust patina), any way shipping would be a big hassle, so local pick-up in La Plata, MD...

this cable shift 904 transmission for a slant 6 is used but is in good condition (car it came from had 113,000 showing, but trans was very clean inside when I pulled pan to drain fluid), Engine turns freely and has compression, Local pickup in La Plata, MD preferred, but will sell trans...

this right (passenger) side door from a 1965 plymouth barracuda is used, but is in good condition (no dents or rust through), local pick up preferred, but I might consider removing all of the heavy stuff (windows, regulator, tracks) and ship the shell to someone (the whole thing is too F$%$ing...

this set of four 14 X 4.5 OEM SBP Mopar Steelies are used but are in good condition, this set of small bolt Pattern (5 x 4") wheels came on a 1965 barracuda I parted out last month, price $25 each, or $45 a pair, or all four for $80 Local pickup preferred but shipping can be arranged at buyer...

I got a pair of these strange looing 15" steel wheels on a 69 fury parts car. They are large bolt pattern , so probably from an old Mopar or Ford product. I have looked around and kinda think they may be from a 1949 -1951 Mopar, but I am not sure? they have these five clips riveted to the...

this 318 engine is from a 1969 fury III 4 door that I am parting out, the car has 47,*** miles . I did not get chance to run the engine prior to removal, but it has about 8 degrees of slack in timing chain and good compression. Located in La Plata, MD Local pickup only, engine complete from...

this grill from a 65 barracuda parts car is used and in FAIR condition, the center section is bent along the upper edge and three of the four mounting taps are broken off, the drivers side section is bent along the lower edge, most of the chrome is hazy and has some pitting. Maybe usable for...

this rear "wrap-around" window from a 1965 Barracuda is used , but is in good condition (clear with a few light scratches that can be polished out), Just removed from a 65 barracuda parts car just before I took it to scrap yard. Price $50 local pickup in La Plata, MD

this set of dust shields are from a set of '75 dart disc brake spindles I recently sold, they were removed to save on shipping. These are for 11" rotors (stock for a '73-76 A-body LBP). They are used, but are in good condition. They are straight and rust free. come with most of the bolts and...

for sale is one used front anti-sway bar for a 1967-1972 mopar A-body car (Dart, Valiant, demon, duster, scamp, or 67-69 barracuda). It is used but is in good condition, the frame mounts have decent rubber in them and could be used as-is. The links are included, but would normally be replaced...

this set of trunk hinges came with a trunklid from a salvage yard in Oregon. I got them with a 65 barracuda parts car. They are in very good condition and work well(not all worn out like the ones on the parts car). Price $50 + $6 (shipping within the US, more to ship elsewhere) Bob

this engine and trans came out of a 65 barracuda I am parting out. The car was not running when I got it (had not been on road for 25 years). Engine does turn over and is a good canidate for rebuild/parts (or maybe even get it running and use AS-IS). Engine comes with manifolds. carb...

this trunk lid from a 1964 Barracuda is used but is in good condition (pretty straight, with a little surface rust on inner lower lip, no rust through). It came as a spare part with a parts car I got last week. The car's previous owner had purchased it from a salvage yard in Oregon back in 2003...

this set of spindles from a 1976 dart are used but are in good condition. they come as shown with dust shields, cailber mounts and lower ball joints. Price $125 plus shipping. Local pickup in La Plata, MD is OK and encouraged.

I am parting out this 65 barracuda it is a 6 cly auto on the floor car, 9" drum brakes, 7.25 rear. Body pretty rusted in typical places (front floors, drivers door, rockers, deck lid, rear quarters. Front fenders have a little rust behind wheel opening but are fixable and something you can...

this rear window is in good condition, local pick-up in La Plata, MD Price $200 or best offer other parts available from this 65 barracuda

KUDOS to the folks at MIR for rescheduling this event due to the lousy weather forecast for this saturday, October 29, 2011. About once every two or three years they get rained out, at least this time they saw it in advance and called it ahead of time! Hopefully it will be nicer weather on...