Search results for query: *

The original pedal is falling off of my Barracuda. I ordered and received a new accelerator pedal kit with hardware and it looks fairly straight forward but I rather have instructions on the correct way to remove and replace the pedal. It has been awhile, since I played with my car and I do...

Rick, Hello.. I am looking for the hood insulation for my 1967 Barracuda plus the clips. I would like to know availability and cost.. thank you

Is missing the bushing on the rod ? is it possible to just replace the bushing or does the entire striker need to be replaced? The door is vibrating at the striker because the bushing is gone. I have not found either a bushing or a striker in line.. Does anyone have some guidance for me..

I am leaning to your thinking.. The shaft is a splined shaft , it should not be able to move, therefore no play should be at the coupler, yet there is about a 1/4 inch to either side and if you combine the distance of the play it is about 1/2 inch.. I don't own a lift and with back surgery I...

This the picture of where the play is. before the wheels start to move, the roll pin moves from one side of the hole to the other.

Steering shaft and coupling pot is what I think it is. I will try and add a picture . I am wrong the excess play is at the coupling pot and the steering box. Just looked at it now. there is a roll pin in the hole of the coupling pot and that is where the play is..

That is my next step. I am going to try and take a picture of the problem area. Then I have to learn how to post it here. The area I am speaking of is where there is , what appears to be, a joint where the steering shaft top half joins with the bottom half. There is a slot and what appears...

My steering wheel shaft, on my 67 Barracuda, has so much play at the connection to the steering box, it is starting to feel unsafe. where can I take it to repair. ?? Constantly trying to keep it going straight.. **( Perhaps I am saying it wrong. The steering box was replaced, the problem...

How can I correct loose, sloppy steering on a 1967 Barracuda with power steering. It is to the almost scary to drive.

Thank you. I have been leaning in that direction..

Posi, sure grip, limited slip who cares, we all know what it is. The man is seeking advice on a project not a class on terminology.

I have a 67 Barracuda conv't. It has a 360 roller motor with 390/400 hp. I had 3.91 gears several years ago but swapped those out for 2.93 for highway driving. I want to put new gears to restore some of the get up and go. What would be a good ratio? 3.55, 3.73 and still be streetable..

I have a 1967 Barracuda. Yesterday, Feb, 29, for unkinown reason my headlights will not turn on. What do I need to check?

I am running cast aluminum Mopar performance on a 2002 Magnum 360 with the 318 exhaust manifold. Those would not fit the magnum 360. Thanks

Please, don't beat me up too bad. I am having a slight issue that I can't get right. I have a 1967 Barracuda. I replaced the 318 with a magnum 360 about a year and a half ago. It is a crate 360 magnum from Mopar. I used the 318 exhaust manifolds and there in lies my issue. I had to...

I used black silicone on my penta star works fine.

PM sent.

Thanks Tony I will give him a shout. John

I am in need of the plastic air vents that are located on the lower inside of the doors. I do not know if all a-body cars have them or not. I would think they do. I am missing one and the one I do have is in really rough shape. I would like to find a source for these. Thanks for any help

You are right it does sound and look that way. I just try later today. I am being kind of careful cause I don't want to f-up the paint. I just can't believe that I can't ... Thanks for the above suggestion. Now, if I only wore underwear.

On a 1967 barracuda does the headlight bezel go on first or the grille? I am putting them on, after paint, and I can't remember the order. I have the grilles on but it looks like I won't be able to slide the joint from the bezel onto the grille. It also looks like if I put the bezels on first...

Mine did the same thing, not serious, but annoying. I replaced my voltage regulator and all was fine. I did replace the alternator later on but that was weak.

Happy Birthday and you are never to old just better!!

They have the snaps on e-bay. 5/8 inch are 25 for 10.99/10 for 4.99

I saw your boy that night and you can be right proud,sir.

I have nice used OEM, but the finish is scratched, small pits etc.. I wanted a better look to go with the new paint. I priced new handles at the local Dodge dealer and was quoted a price of of over $100 per door just for the exterior handle. According to the mental midget, in the parts dept...

Thank you, thank you, thank you... I installed the pass.side this evening and they work fine. Had to change the assembly for the original push rod, one screw and you are done.

Thank you, I will give that a try.