Search results for query: *

  1. N

    Need both fenders for 74 dart sport

    Hi guys , iam restoring a 1974 dodge dart sport and i need both side fenders. Anyone out there have a pair that are in good shape for a fair price. I live in Canada so i will look at all Canadian responces first, then i will look at all U.S ones . Are dollar is as good as yours, buts its the...
  2. N

    Motor runs like s--t until it warms up?

    Yes its a holley with a electric choke
  3. N

    Motor runs like s--t until it warms up?

    Hi guys the title says it all , just pulled the dart sport out of the garage after a long cold crappy winter. This car when its warmed up runs fine, its just starting this thing that drives me crazy. Every time i cold start this thing this is what happens. I pump it once the engine starts and...
  4. N

    318 Chyrsler Stroker kits

    I meant to say what does the rhs heads have over the eddys (my crappy spelling)
  5. N

    318 Chyrsler Stroker kits

    Thanks for the information guys, can you tell me want the RHS heads have over the eddys (idont know) except that the eddys are not cast iron. Also i forgot to mention that if i got a camshaft with 525 lift would this camshaft work well with power brakes? Thanks again for the help.
  6. N

    318 Chyrsler Stroker kits

    Opps i forgot to say that it will be stroked to a 390. Thanks for the help guys.
  7. N

    318 Chyrsler Stroker kits

    Hi guys, iam planning on stroking my 318, here is what the kit contains. Scat 4.00 inch stroke cast 9000 series crankshaft. Forged keith black dish pistons. Scat i beam connecting rods. Total seal file fit rings. Clevite 1/2 groove tri-metall main bearings. Clevite narrowed tri-metal rod...
  8. N

    Back in the 60's

    In 1967 i was 16 years old, man i loved the 60s and early 70s. I lived through the muscle car era the drive in movies and bush partys and such. There was only 1 channel on the black and white t.v there was no internet or casinos or computers cell phones or bank machines. Gas was cheap everyone...
  9. N

    Little 318

    The air-gap is a great intake, but the ports are the bigger 340 and 360 size. Your 318 heads have the smaller ports, there will be a port miss match, If you keep the 318 heads i would use the eddy performer the ports are smaller and closely match your heads.
  10. N

    Little 318

    I think that a compcam xe262 would be a good choice for your engine along the eddy performance #2176 manifold . A 600 eddy carb with a set of hedders and you will see a difference. If you wanted to go deeper, you can get those 318 heads milled to raise your compression a little with bigger...
  11. N

    Ethanol blended gas (good or bad?)

    Hi guys i have a ? for you, i have been hearing alot of information about ethanol blended gas, some good some bad. I dont know how it is in the U.S but hear in Canada, some pumps are 5% some are 10 %. What do you think about this gas in these engines? (good, bad, will it cause any harm? ) I...
  12. N

    magnum head cam?

    I have a comp cam xe268, 477/480 In my 318, comp cams says thats the largest cam you should run with a stock convertor. The rpm band is 1500 t0 5800, car runs great.
  13. N

    Rpm vs Rpm airgap

    Thanks for your help and advice gentlemen. Newathis
  14. N

    Rpm vs Rpm airgap

    Thanks , i will get a spacer never ran one before, but now is the time.
  15. N

    Rpm vs Rpm airgap

    T67POWER, i never though about using a spacer? does a spacer add horsepower? and does it help with keeping the gas cooler, which the rpm airgap was meant to do.
  16. N

    Rpm vs Rpm airgap

    Sorry, i should have mentioned that i have my 318 heads worked on at the machine shop, they were milled to raise cthe compression up a bit and the ports were opened up to 340 sze or very close to it with 188, 160 valves
  17. N

    Rpm vs Rpm airgap

    The jntake came in today, i live in Regina Saskatchewan Canada, the intake was ordered in the U.S.A , what do you mean by touched ports? thanks for the help
  18. N

    Rpm vs Rpm airgap

    Hi guys, i have a ? for you, i ordered the rpm airgap for my 318, they sent me the standard rpm instead. I was just if they is a big difference in horsepower between the two intakes? I was just wondering if i should send it back, or not be bothered with the hassle and just keep it, the intake...
  19. N

    Demon vs Holley (who do you like best)

    Thanks for all the information gentlemen, holley carbs have been around for many,many years and seem to have a good reputation. I would one day like to run a demon carb to find out for myself if i like it or not, they have not been around as long as holley, but they seem to be making a big...
  20. N

    Demon vs Holley (who do you like best)

    Thanks for the information gentlemen, it seems that demons and holleys are very close, but you said that they do have a few features that set them apart, what would those features be? Thanks for all information, i like to learn Newathis
  21. N

    Demon vs Holley (who do you like best)

    Gentlemen, iam running a 600 eddy on my beefed up 318, but the carb is getting old and tired(Guess it needs a rebuild) A thought crossed my mind to buy a 650 holley or maybe a demon?. I have never ran a demon carb, are they good for the street? or they more for the strip? They look like a...
  22. N

    Edelbrock manifold, which carb?

    What size is the engine? 273, 318, 340(rare) or a 360
  23. N

    Your help is needed once again

    Hi Guys, once again help is needed and grateful, this is my plan.I have aiready got from AAR fiberglass a scoop, hood, truck lid and back and front bumpers. They are pricey, but i think that they make the best fiberglass product in the U.S.A in (I.M.O). I said to myself , the hell with it , i...
  24. N

    Happy Holidays

    thanks, same to you and your family, merry christmas
  25. N

    engine rebuild help

    I agree with Rumble, thats a tough ? to answer, i guess its how you want to build it. Do you want a cruiser or something a little faster?
  26. N

    Duster, Demon, Dart sport doors

    Hi everyone, iam restoring my 1974 dodge dart sport, i need a drivers side door, Will the doors from a demon or duster fit on a dart sport?, I hear that they will depending on what year it is. Any information and help is grateful, thanks in advance. Newathis
  27. N

    Happy Thanksgiving

    Happy thanksgiving to all the good American people on f.a.b.o, this is also a great n.f.l football day.
  28. N

    What area are you from?

    Regina Saskatchewan Canada EH
  29. N

    340 headers

    I have a 1974 318 dodge dart sport, i have never run Dougs , just holley flow techs. I dont know if anyone makes a block type of hedder for mopar. I want to warn you that hedders are great on a A body, but they are a pure nightmare to install and they hang low , more on the drivers side. OF...
  30. N

    want more power from my 318...

    The comp cam # 268 477/ 480 has a rpm range 1600 to 5800 and acording to comp cams they say its the largest cam to run for a stock converter. You can check it out if you like go to www.compcams.com and under the word SEARCH, Type in 20-223-3, it will tell you all about it. I run this cam in my...
Back
Top