Search results for query: *

I have a new set of main bearings #MS-1277HG & a new set of rod bearings #CB-527HND. These are the H series For a Mopar big Block. The main bearings fit a 74-79 440 and the rod bearings fit pretty much all the Mopar BB's. Summit Racing sells the two sets for 219.00. I'd take 175.00 Shipped.

I've gotten to the point when buying parts from Summit or Jegs, I’ll check Amazon first before buying more times than not they have what I need or want. They have it cheaper and most of the time free shipping just make sure it states "free super saver shipping" or something like that. The only...

I am needing some help finding a 12 volt source. It is for the power on my EZ EFI I have been trying to install for some time now. It needs to have power to it with the ignition on, cranking and engine running. The directions also say's do not use any source going to the coil. So any idea's out...

I have a rebuilt 383 engine for sale. This engine was in the Dart Sport when I bought it. The engine has around 4500 miles on it. The engine code on the side reads 2468130 with a production date of 6/24/69. Bored .30 over MP purple cam .509 Double roller timing chain Cast iron heads with...

I saw this listed on the Jacksonville FL craiglist, I dodnt know who it was that posted it but it is funny!!! it really made my day. Enjoy! http://jacksonville.craigslist.org/pts/2164552658.html

Has anyone had any experience or heard how well the Fuel Air Spark Technology, (FAST) systems work. I am considering getting the duel quad EZ-EFi system for my 512 stroker. I'm tired of messing with the carbs. There web site does a good job with all there information but I believe actual real...

My brother sent me this and I just had to share it. http://biertijd.com/mediaplayer/?itemid=19448

I started hearing some noise from by BB I started tearing it down and found what looks like the back of the timing gear has worn into the block about a 1/16 of an inch, the main bearings show some metal tranfer on the them the cranks looks as if it would only need to be polished. My question is...

This is the last of the stuuf I have for sale, So if you see anything you might be interested in please feel free to give me a hollar. 1. Two fuel regulator's with hose and fitting, some of the fittings are new. 25.00 Shipped SOLD 2. Two shielded breathers fits 1 3/8" breather tubes...

Here are some more things that I will selling to help pay for a new roof, thanks for looking. 1.Mallory Unilite Dist I bought this from ebay and never installed it in will fit Mopar 383 or any "B" engine. I polished it up a while back and looks good. 50.00 Shipped 2. Sunpro tach I took...

Here is a list of more stuff for sale, still trying to raise some cash for a leaky roof. 1. Two Speed Demon Carbs both are 750 double pumpers w/ mechanical secondary's both have about 1000 miles on them and work just fine 425.00 each or 800.00 for the pair, + shipping. I have a 512 stroker...

I am selling a bunch of my stuff I dont want to but the roof is leaking and I dont have the funds to have it done. 1. 383 BB W/tunnel ram, this is the same engine that was in my car when I took the pics of it for my profile it was yellow but I painted it Hemi orange. It is dated 6-24-69 I...

I have a B&M z gate shifter that I just took out og my car, It is in great shape, the cable is the new one from the new shifter I just installed along with all hardwear, I switched to a Hurst Pro matic V shifter for my reverse manual valvetrain. $85.00 Shipped. I live in Hortense, Ga 31543. I...

I have a pertronics brand Flame Thrower coil, I have the + side wired to the Pertronics brand distributor and to a 12 volt sorce as directed in the instructions, the negative has a wire to the tach and to the black wire of the distributor. I have no spark going to the plugs but do have power to...

I am in need of a complete antenna in good shape for my Dart Sport it should be the same for the dusters and other A bodies. I have a small budget so please go easy on me. Thanks Brian

Does anyone know were I can find a vender or anyone for that matter, that can get me the clips that hold down the 3/4 vinal top trim for my 76 Dart Sport, I cant find anyone that supplies these things and I really need them. Any help would be most welcome. I dont care if there new or used as...

I am looking to get the passenger side inner fender well for my Dart sport, any duster or demon inner fender should work. PM me if you can get one to me, let me know price and shipping. Grey hound can ship for a good price, just somthing to think about. Shipping would be to 31543 Hortense, GA.

Can anyone recommend someone for polishing all my trim parts from my Dart Sport, its going in for new paint and I wanted all the trim parts to look good, I already bought new sport mirrors, door handles and locks. but wanted to get the trim polished. Also if any one is interested I will be...

I will be installing a comp cams solid roller I read in a book that a rev kit is highly recomended. Does any one here run a rev kit? also were can a guy buy one. I have found them for chevy's :pukel: but can't seem to find them for BB Mopar's (440) :supz:

I have a 76 dodge Dart Sport, I need some clips for the 3/4 vinal top trim, any one have these please let me know. Thanks Brian

I thought this might be a funny topic about our Mopar's. From time to time I"ll get some moron that thinks my car is somthing else. Has any one had this happen to them? I mean way off stuff. I have a 76 Dart Sport and today I had a guy at the grocery store (yes I drive it to go get milk, hey...

Does anyone know if there are any websites that can tell you any information on OEM chrysler parts based on the numbers stamped on the part, I.E. I have a distributor that has a tach drive and stamped on the tag is Chrysler 4120942 IDH 4002 51 4. Any help would be good I know it goes to a...

I have a pair of RPM Performer Heads for my BB #60929 out of the box they flow at .600" intake 291 and Exhaust 217 does any one have flow numbers after a full port and polish. I know this is a broad questions and will very from port job to port job. But I wanted to get a rough estimate on the...

Tha Snakes have really been bad this year, not sure why though. Last night I found this on not to far from the front door. After I cut the head off it still measured over 5 feet. Thats my father inlaw in the pic with me. Daddy's getting a new pair of Boots!!

I breed and sell Jack Russell puppies, I will have a new litter around the 20th of Sept. I will post pics once they are born. I have very resonable prices between 200.00 and 250.00. All puppies will come with a puppy package from Eukanuba dog food, shots and wormer will be given. I start of the...

Hi guy's, just a few quick questions 1. Does anyone know how good the quality of the "off brand" rockers are that I see for sale on ebay? I don't want to waste my money on junk. But at the sme time I don't have a ton of money to buy the expensive name brands like from Comp Cams I want the 1.6...

I amlooking a set of hinge cover for my bucket seats, they go on a 76 Dodge Dart Sport, but other year models should work also. let me know if any of ya'll have a set you can sell me. you can PM me or call 912-288-6542 leave msg. Thanks Brian

Has anyone ordered parts from Vans Auto or Dante's, I am painting the Dart next month and want to buy some new door handles. Vans has a much better price but was concerned about the quality of there stuff. I was wondering who has ordered from Van and from Dante's and how good is there stuff? Any...

Any one know how much a Tach Drive Distributor might be worth. I have one and need to sell it to raise money for a new paint job for the old Dart sport. It is upgraded to an electronic ignition and is in perfecrt working order. I took it off my 383 and replaced it with a Pertronix billit...

Okay, I'm new here to FABO and I have seen some posts and a reply to one of my own post that say "BUMP" or BUMP for ya. What does that mean. I feel stupid for asking but I was just wanting to know.