Search results for query: *

What heads you running? No go on Hughes. They don't make rockers for my heads.

I got everything back together and it sounds happy again. I'll be able to make the show without hurting the motor. One thing I noticed when changing cup plugs in the shafts so I could clean the shafts out real good. One shaft had all 5 holes drilled the same ID. Basically that shaft had no...

I'm going to make a decision tomorrow on the rockers. I can make mine work for the show I need to make on Saturday as long as I can get push rods in time which shouldn't be a problem. I'm probably going to do what you did and change rockers.

I run a custom set I had made years ago. Never mind the hat in the picture, this was taken before I finished it.

I started with ported Eddy's and switched to these after the car hit the magazine. Probably in 2005. I made an extra 125 HP at the tire just switching from the Eddy's to these and a cam change.

Glad to hear this actually. Where is the best place to buy the rockers?

Not a dumb question and yes they were.

Can't remember what brand push rods these are? There's no name on any of them. I built this motor 10 years ago. I either got them from Scott Brown or Ryan at Shady Dell so I'm sure they're good stuff. Scott did my cam and Ryan did my heads. I have 3 adjustment balls that are bad as well as...

These rockers look suspicious. The quality is poor IMO. I bought these heads 10 years ago when they first came out. Can't remember but at that time I don't know if I had any other options other than these rockers? I see the wear on the push rods like it's contacting the head. The push rods...

I bought the 360-2 heads for my 416 about 10 years ago. I might have 1500 miles on the motor now. The car has pretty much sat since 2007. I get it out a few times a year. Anyway I fired it up yesterday and the valve train was unusually noisy. Solid lift cam but something was off so I shut...

I bought these for the Cuda a couple years ago. I just didn't like the way they looked on a 9" rim so I bought these same tires in a 28x12x15 which I still have on the car. They would look great on an 8" or smaller rim. I run these tires on everything I own and love them. I'm just tired of...

I bought these tires new last year and they are just a hair too big for my set up on My Grand National. I put maybe 400 miles on them all highway. They are like new as you can tell from the pictures. Just tired of them taking up space. I have these exact same tires on my 1968 Barracuda with...

Do you have a recommendation for a coilover on this set up? I want to go this route too and get rid of the torsion bars. I need the room. Also if there was a one stop shop for everything needed to do this job with your supports where would that be? Nice work BTW!

I know what you mean. If I were going to let the car sit for an extended period of time I would back off the rockers but I keep the car here at my dealership and once in a while I need to move it for one reason or another. I may try and track down Scott Brown and see if he remembers...

To be honest with you it was a long time ago and I can't remember what Ryan did exactly. I know he did a valve job etc but as far as full port and polish?? My concern really isn't with the lift while running but having the spring compressed when it's not running and the car may sit 3 months...

It's been a while since I've been on any Mopar boards. Good to be back. I'm considering going to a hydraulic roller over my solid lift cam this winter. I don't race the car anymore and don't plan to spin the motor over 6500 rpms. My car sits most of the time and I'm a little leery of valve...

Love that car!

Not sure what the thanks thing is but "Thank you" Good to see you again "Evil" Doing some reading on the forum and trying to get caught up a little bit. Lot's of new faces around here. Talked to Scotty tonight from MoparTech board. Haven't talked to him in a long time. Hope some...

I ran Cal Tracs for years and switched to a Control Freaks 4 link a couple years ago. The car hooks better on the street. I don't race the car anymore so I can't tell you how much better it really is at the track but if money is no object go 4 link. Way more adjustability.

This has got to be my favorite thread of all time!

Great 60 ft and the car does well on the back half too! You'll have a 11 sec time slip for sure with a little tuning! Nice job.

I sell mainly $5000 to $15,000 vehicles. I bought an old AMC car dealership that had been vacant a few years. It's got a showroom and a 50x100 steal insulated shop in the back. I hire out all my service work so I use it for my man cave. I got a 2 post hoist and most everything I need to do...

I've been away from the board quite a while. I did a search for my name and found a few threads wondering where I've been so I'll get you updated with me and the Cuda. I opened my own car dealership 4 years ago after getting out of consulting. The Cuda has been on the back burner for some...

Sold!

Hey long time no see!! How have you been? Did you get your car finished? I still have the shocks. I emptied my inbox so shoot me a message if you want the shocks.

Go ahead and PM me again.

I will take $150 for the shocks. They are the stocker star model. They work great for street.

Sorry for the mistake. How about just editing my post by taking the number out and sending me a P.M.? That way I don't have to redo the ad. Just a suggestion. Brett

I didn't read the rules and yeah they already deleted one of my ads. I haven't been in the forum scene much in the last few years so I'm a little rusty. My location is Mount Pleasant Iowa I figured I'd give the A Body guy's a shot at my parts before putting them on ebay. My stuff is nice...