Search results for query: *

275x60x15 10" wheels with 4"BS. Springs moved inboard and rear narrowed 2"

Thanks that will work.

The mounts side to side have got me confused. It was a 273 car. this is what is going in somehow.

I know this is been done before. But every thread drifts around till you can't follow it. I need to know what (stock parts) I need to do this. Modified or not. I have 72 340 mounts and 273 mounts and biscuits. Straight forward what I need to do this. Photos are best. Thanks everyone.

They will be put in and mostly assembled first, still not easy.

These are the Hookers. My holes are a lot smaller. Will need to build and install them before the engine. 2 out one side 3 on the other. Need to recoat before assembly. They have been in and out of the openings 50 times.

Thanks for the info. I'll run it all again just to make sure before I adjust.

New mild build 340. I think I understand the degreeing process. but from these cam specs what am I looking for at centerline. Doing what I've read, heard, watched. Off the #1 intake lifter I end up with 110. From these specs what number am I looking for? 264-264, 214-214 @50 lift int./ex 440...

Anyone?..

Thanks, but I really need the 10”. With my springs moved inboard and my rear narrowed 2” I’m after the real deep look.

Looking for a pair of 15x10 rallies or steel wheels. Large bolt pattern with a backspace of about 4” Russ

Looking for a pair with 4.5" Backspacing. I have a set with 5.5" Backspacing. Thay must be in good restore able condition. Send PM. Russ

From what I’ve read. 2.65 or 2.66

Pittsfield MA

So many cars so little time.

Looks as if yours is to.

1- 71 Abody 4 speed with stock bell housing, shifter and linkages. 600 Sale pending for 73 Abody 4 speed with looks like Lakewood bell housing, shifter and linkages. 340 flywheel and clutch kit. A resurfaced 340 flywheel, 150 and new 10 1/2" Ram clutch kit 200.

Rattle heard on startup is the door glass.

73 Duster, H code, auto bucket interior. Virginia car. Clean title. No rust in frame or floors. Rebuilt 71-318 .030 Forged TRW pistons. 10:1 Mopar Performance purple shaft, 280/280 .474/.474 2.02 J heads, 670 Holley New distributor, alternator, starter, radiator. Rebuilt 727/TCI full auto valve...

Thanks to you. Great to meet another member. Good luck on your project.

Pittsfield Ma. I have someone coming tomorrow to possibly take it. I’ll post if gone.

Inbox empty. Still here.

Sorry I will not ship it.

I need it gone. Trade for a case of Bud Light

Trunk pics. Anybody want to make and offer. I could use the space. Video Rattle heard on startup is door glass. Can store till spring if sold. 11,500.00

I just removed a A body 8.25 rear. Open rear and gearing not known. Spring perches moved inboard. Very clean, no rust or pitting. Painted but dusty. complete drum to drum. Good brakes and drums. Will trade toward 8 3/4 center section. Or something interesting. PM me.

Bought a narrowed rear all ready set with ladder bars. Just looking at what it takes to install. I have the floater brackets.

65 Barracuda

Can someone tell me what length bars for a 65 Baracuda? Try to have all the parts before I start. Thanks

More