Search results for query: *

I have a underhood wiring harness for sale. Most of all the connectors are intact and the harness hasnt been completly chopped up. Good for someone who needs a replacement or for someone looking for hard to find connectors. I have tried to picture all the connectors I could so you can see...

High Note Horn, Drivers Mirror with logo, Blower motor ring with seal. I know they are not the best shape but might be of use to someone. Horn 5.00 Mirror 15.00 Blower Ring 5.00 All prices are plus shipping from Granite Falls NC. I will ship flat rate box or whichever is cheaper in all cases.

I have Drivers and Passengers window regulators out of a 1974 Dodge Dart Sport. Both are in good working order. 100.00 plus shipping from Granite Falls NC for both 50.00 plus shipping from Granite Falls NC for one

Bases are not the best 3 of 4 lineup tabs missing one side has crack in pull handle. Armrests are distorted, not completely destroyed. One does have a fairly decent shape ashtray and bezel thou. May be good for someone who needs a decent set for a driver? 50.00 plus shipping to Granite Falls NC

Rear speaker fader switch out of a 1974 Dodge Dart Sport. In great shape, I assume it works (have no way to test) 35.00 Plus shipping from Granite Falls NC

Long pedal is out of a 1970 Plymouth Duster 225ci. Short pedal is out of a 1974 Dodge Dart Sport with 318ci Both are in excellent shape just need some cleaning and paint. 25.00 plus shipping from Granite Falls NC for either one.

Anyone have a diagram of the inside door parts on a 70 duster. I have photographed almost everything on this car except for this and its been over 10 years since I tore it apart... Any help would be appreciated.

Cooling Fan off 74 model 318. 4 Blade in good shape. Need detailed. 25.00 obo plus shipping costs. Located in Granite Falls NC 28630

Metal line elbow for expansion valve. Came off a 1974 Dodge Dart Sport. Should fit several models. Expansion valve comes with not sure if its any good thou. 20.00 plus shipping costs located in Granite Falls NC 28630

Filter drier mounting bracket came off a 1974 Dodge Dart sport. Should fit several models. Went a different way on my build 25.00 obo plus shipping costs. Located in Granite Falls NC 28630

Have a good throttle pedal and cable out of my 1970 Duster. Cable is for a slant 6 but pedal is good for all. 25.00 Plus shipping costs from Granite Falls NC 28630

Thinking about running cold air intake thru the inner fenderwell on my Duster. By chance does anyone have some pictures of that done? Curious on how it looks and functions. Any help would be greatly appreciated.

Air conditioning, Power steering and Alternator braces and brackets. Will sell all together or separate. 150.00 OBO plus shipping costs (for all) or PM me with which one you need and an offer. Located in Granite Falls NC 28630

Water pump pulley part# 3698917 5 7/8 diameter, 1 7/8 overall height with california emissions (per 440 source) dual groove 25.00 Plus shipping costs Located in Granite Falls NC 28630

Crank, Waterpump and Power Steering pulleys from 318 with air conditioning. Came off a 1974 Dodge Dart 318 Crank pulley is part# 3614382 (4 groove 7.5 diameter) Water pump pulley is part # 3698805 (2 groove for dual belt alternator setup) Power steering pulley is part # 4343514 (came on...

Brake booster bracket, came off a 1974 Dodge Dart Sport. Good shape, decided to go with a different brake setup.

Transmission Crossmember came out of 1974 Dodge Dart Sport with 318, 904 setup. Good shape just needs some paint. 50.00 plus shipping costs Located in Granite Falls NC 28630

Anyone used this company? They seem to be heavy into Mopar and offer all I would need to get my 518 build up. Just wanted some input if available. Thanks

I am confused on something and hopefully you all can help. I have seen it listed that I will need and that I wont need a spacer. A couple sites show using the adapter and spacer when bolting a 518 to the back of a Hemi like the one listed first in my pictures. Then some say I only need to run...

90mm Accufab throttle body with GM IAC and Ford style TPS setup, was used with FAST setup on GENIII Hemi build. Have since switched to a FAST bigmouth setup. Throttle body comes with a 1.25 inch adapter/spacer to allow the Ford type throttle body to mouth on the 6.1 style intake and use...

4 speed pedal for early 70s A Body. Operational, but previous owner messed up rod mount and welded a bolt in place of the pin. Other than that they seem in working order. Located in Granite Falls NC 28630 100.00 Plus Shipping Costs

Complete fuel filler tube with seal and cap. Went custom with my fuel system and not gonna use this set up anymore. Located in Granite Falls NC 28630 50.00 Plus Shipping Costs

Heater controls from 70 Duster. Item was damaged -- removed from sale. Sorry.

HVAC control head out of a 74 Dart Sport. All vacuum ports are intact, slides work good (not busted) 1 of the attaching tabs broke during removal (piece is taped in place, can be put back on with epoxy) Located in Granite Falls, NC 28630 35.00 Plus shipping

Any one running a catch can on their hemi swaps? I have been looking at several brands and would prefer something that doesnt hang a foot off the engine if possible. Any ideas, custom setup or pictures available?

I am looking for a good, straight hood latch support for a 70 Duster. If anyone has one or knows where I can pick one up let me know. Thanks.

Anyone use the UScartool K member stand with a HDK front end? Will it work without major hacking of the stand?

Looking to see if anyone has a K-Frame stand that they might have used a time or 2 but now its just sitting in the garage taking up space. Let me know, would be glad to help free up some space. Thanks

I am installing a A518 transmission in my 70 Duster. I would like to know about how much drop I should use on the transmission crossmember. Most universal kits come 0-3-6 inches. I am thinking prob around 3, but wanted to see if anyone has already done the math. :cheers:

I would like to share my build with you all. I have been working on my car for 6 years and I will catch you all up when I can. I have been reading alot of the restoration thread and have gotten inspired, excited and found all new ways of doing things. I only hope I can pay back the help with...