Search results for query: *

I have all receipts and about $10,000 in Upgrades Thank you!!! http://73dodgedartsport360.shutterfly.com/ Asking $14,499 Welcome and Thanks for taking a look at this beautiful Dodge Dart Sport: This is just a quick listing for my Dart, please view the links on this page for a full...

Thanks for the comment, this is not a factory 340, it's a brand new rebuilt 360 with about 800 miles on it. I don't know where the 8 3/4 came from, the guy I bought it from put it in. Most likely out of a Hemi, not sure on conversions. Well I've got 19,000 into this and I know I'm going to...

Can any of you MOPAR folks tell me what you think my car is worth? I'd like to sell it to repair my garage, so any help or opinions would be much appreciated. I've already dumped/invested :) 19,000 on it...800 miles on new engine. Thank you!!! http://73dodgedartsport360.shutterfly.com/...

Price Reduction $15,999! Takers? Offers?

http://73dodgedartsport360.shutterfly.com/ Asking $17,900 Welcome and Thanks for taking a look at this beautiful Dodge Dart Sport: This is just a quick listing for my Dart, please view the links on this page for a full picture album and sound clips! (more coming) Any questions please...

Mobodyman, Thanks so much I really appreciate the time you took to take the pictures and post, they are an invaluable resource for me! I hope this helps others too! I'm going to try my modified bracket idea, because I'm stubborn, and I like a challenge. I'll post back here with picts when...

A lot of topics have been brought up regarding the go wing on a lot of different mopar models. My specific questions is has anybody installed this on a early years 73 dodge dart (the round mopar not the square :) Some sites mention the go wing and additional hardware needed for the under...

Well for any of you out there with a similar problem. I followed a recommendation to call up rtspecialties dot net PH: (570) 388-1082 and spoke to Tom who was extremely courteous, knowledgeable and helpful. We found the part I needed or $5 bucks and he explained the special instructions needed...

The smallest part is driving me crazy. I need to replace this nylon piece that is missing from the window guide. My window flops around when rolled up. I tried to compare it to my passenger side door, but the internal workings are completely different then the driver??? If anybody has...

Thank, I did see that site, and not to be a nit pick, but it didn't say 1973 just 72 :) so I wasn't sure, but for 3 bucks....ah heck, gotta just try it. Thanks a bunch!

I can't find, for the life of me, where to buy the nylon guides that hold the side windows to the track when you roll down the window. It's a Rectangular nylon piece with a hole in the middle where the ball goes into it. I've searched many sites to find nothing. Any help would be great, or if...

Actually, I'm more curious about hearing from people that have actually bid before, because I'm curious what the "MECUM" checkover on the car is prior to bid? Also, what does the seller have to divulge as far as issues with the car? I know it's risky, but a car with bad compression isn't...

Also, is there anybody who has used MECUM to purchase a car? Curious on how many details the owner gives you about the cars condition? Any advise would be appreciated about bidding. Thank you

this was on channel 754 where i live it was HD television I believe it's called.

I've been watching Mecum Auctions on HDTV. Doesn't it seem strange how cheap these cars sell for? I mean I've looked at many cars and a lot of different prices and even if these cars are rebuilt and not numbers matching, for the condition I can't believe the prices they sell for. Am I missing...

so basically, this guy before me put 2 temp senders? lol, amazing. I just re configured/modified my whole cluster, so I know what's there. The only gauge he had was a mechanical oil pressure, which i replaced with a electric. And don't start going on about what is better mech vs elec :))

Ok, then why 2 water senders, the original dash only has one gauge for temp, and another light (dummy light) that says oil.

Hey all, On my dash there is a light for Oil, question is the only sender I see is located on top of my intake right next to the water temp sender. Now how could an oil pressure/or low oil sender be located on top of the intake? My manual shows a sender wire being purple and this is purple...

I've read a lot of posts and my head is spinning. Could somebody who owns a similar year please tell me what brand gauge you used for Anmeter, Water Temp, Fuel and Oil pressure. Specifically, Fuel. I have a stock sender and want to make sure it works with an aftermarket gauge. I need real...

Yes, every bit of info helps. Yes I think the wiper knob must have a release on the rod somewhere behind the cluster. So, can the gauge physically be damaged and are the repairable? Because all the other gauges work and there is resistance on the blue wire all the way up to the plug that...

Red Fish can you give me 2 more answers, please? 1. Could it be possible that a bad voltage regulator can only effect the gas gauge and not the others? 2. I want to take my cluster apart, I've removed it from the dash, however I can't get the wind shield wipers knob off, looks squeezed on...

I mean that it has adequate vacumn for my brakes! The last cam I had was so lopey I couldn't use my power brakes at all or atleast they weren't hooked up. By the way that cam is for sale along with the pistons and the morosco valve covers, which I'll post sometime next week with all the...

I meant I would entertain the idea of what you said crazyguy said, "experiment with the timing curve= highest initial possible with it all in around 2200rpm", I got confused about what ramcharger said, "all I can say is add a higher stall TC so the engine can rev into it's usable range and kiss...

318 hater, that's too ironic. I appreciate your input, and completely understand your mentioning of swapping out parts, or at the easiest at least the cam. When I had this engine built I asked him to specifically call me about the cam so we could decide, but he built it anyway without asking...

Mullinax95, yes that is correct. You know this is my first Mopar and I'm starting to realize from the way you guys talk from experience, that this is the way the car runs because of it's setup. It runs strong and smooth in every respect, except for low RPM, but taking it out the other day I...

Thanks crazy guy, I realize my ignorance here is getting old for everybody and I'm going to take this information and start researching and hopefully get some help tuning things. A Phenom of carb tuning....I'm no idiot...look out...I'm going to fix this issue :) W2360Duster, check out this...

Crazyguy: Your right I did notice the metering blocks on my HP 4150, not sure what I saw on TV, why offer metering blocks if they already have them? Maybe some models don't. They said something about not having to take off the bowl to adjust the jet, and with the metering block it was on the...

Crazyguy, that's a good point, and I'll take it into consideration. I'm confused, so the Avenger is what I need or what I don't need? I guess I should go back to putting metering blocks in my HP 4150 and see how she goes?

If you had any idea what I dumped into this engine you would know I'm not spending more on it, or tweaking it right now. My hope is to just tune the carb or replace it. I notice the Street Avenger comes with Metering blocks where the the HP 4150 does not, this should help me tune it. Not to...

WOW! Lot's of options here thanks everybody! GTXperience: My concern was that I think I can get a smoother ride around town, then the 4150 750 cfm Holley that I'm running now. I guess my real question is what is everybody else running? And I know mullinax95 love's his (I'm guessing it's...