Search results for query: *

  • Users: glhx
  • Content: Threads
  • Order by date
  1. glhx

    [FOR SALE] 69 Dart AC box $250 obo

    Got this AC box for sale. I was going to put factory AC in my car and decided not to mess with it. It has the vents that go under the dash with it. buyer pays shipping. text 406-465-0888
  2. glhx

    999 lock up wiring problem

    I have a 999 transmission in my 69 dart. It came out of an 87 van. it’s got a switch on the back of it that looks like a temp sender. It’s not a temp sender. It operated the lock up clutch on the torque converter. However……I don’t know how it operates the lock up. im getting a lot of mixed...
  3. glhx

    Hood coil spring unwound

    For years I’ve popped the hood of my 69 dart. It’s always sagged on one side. I took the fender off the driver side to find out why. The coil spring is there and attached. However, it’s unwound. I haven’t been able to get it wound back up to where it’s got tension. Is there a trick to...
  4. glhx

    Which power brake booster can I use

    I’ve got a 69 dart That I put brakes from a 74 Plymouth scamp on. Front and back disc brakes. This has the lifted power booster The power booster has a leak. I can hear it. I either want to replace it or rebuild it. Or can I use a substitute. Rock auto doesn’t have the 74 power booster...
  5. glhx

    No oil pressure to the rocker shafts.

    I’ve got the rocker shafts with the notch on the drivers side……facing the back of the engine. Got the notch on the passenger side. Facing the front of the engine. Was told it didn’t matter as long as they were opposite. The oil holes look like they line up when i rotated the shaft to check...
  6. glhx

    [WANTED] Kick down blast and socket clip

    looking for the clip for the ball and socket for the kick down linkage
  7. glhx

    [Found!] 69 dart lower quarter patch panel

    looking for this if anyone has one laying around they want to get rid of. I can get one from amd but I thought I’d stop by here first.
  8. glhx

    [WANTED] 67-76 dart patch panels for rocker area

    I need this. A piece of rocker panel To fix spots under the driver and passenger side at the corner of the door. 6” per side should cover it. So a 15” long Piece to be safe. And the lower part of the quarter panel in front of the wheel well. I think even a 4 door would have this as the rust...
  9. glhx

    Milling a 302 head

    what is the max I want to mill off of this head? I’ve seen anywhere between .030 and .050 What are the drawbacks of going that much?
  10. glhx

    [WANTED] A few small 904 or 727 parts

    looking for the parking pawl return spring in the tail shaft housing Two original pan bolts One filter bolt to the valve body, one of the three longer bolts. If anyone has these laying around let me know 727 probably shares the same parts
  11. glhx

    [WANTED] Ring gear for 76 904 torqueflite

    looking for the ring gear assembly that fits a 4/4 904. 76 was the first year they had this set up. The gear is 4.5 as opposed to the later 5”. The difference in the earlier ones and this one are the teeth on this one are taller to account for the extra disc. - You can see here the...
  12. glhx

    [WANTED] 904 outputshaft support

    looking for a good used one for a reasonable price that’s in perf3ct or very close to perfect shape 4 bolt with little to now wear and no dug in sealing ring marks.
  13. glhx

    999 lock up clutch wire

    Mechanical override: Lockup torque converters This article shows the lock up clutch after 1986 to be activated by the lean burn computer. My transmission is 87 and has this style.... It is controlled by a relay that is ground activated and sends power to the clutch according to its...
  14. glhx

    A999 transmission identification number

    4431556 87 custom high roof van, fully loaded 318 Lock up clutch wi5 single wire coming out of the back port. Has a 904 torqueflite. The chart doesn’t go up high enough to identify it. Is this a 999? Does it have the lower gear set
  15. glhx

    Inspection of a 904 torqueflite

    I just tore down this 904 I’d like to know what kit to buy or what separate parts are needed to refresh this or whatever it needs. It had no problems shifting before I tore it down. I had recently changed the fluid. There was a lot of black powder in the pan when I pulled it to do the...
  16. glhx

    [WANTED] Cheap Small block cam for budget build.

    I have a pretty worn engine I’m putting some life back into with new bearings and baskets. A new timing chain and oil pump. It’s a 318 and has the stock 240 cam. The cam I have is good but I’m putting a feeler out there in case someone has a cam they want to sell cheap or just get rid of...
  17. glhx

    Torque converter crack

    76 transmission. All original Original converter This looks like a leak. Not bad that I know of. The converter seal is new- this is cracked-looks like part of the seal in there this is the other side - just a closer shot I’ve got to get this back in no matter what. I’m just trying to...
  18. glhx

    2bbl to 4bbl conversion?

    ive got a Holley 600 cfm 4 barrel on my engine. The 2 barrel that originally came on the engine was a Carter BBD 285 cfm. The conversion formula is cfm x 1.414 Does this mean that my 285 is actually a 403 cfm carburetor?
  19. glhx

    318 timing chain.....and why the engine should come out.

    I decided to change my timing chain just for the heck of it. I like the idea of solid timing that has a mark that stays in one place and doesn’t wander up and down on the balancer when I put a timing light in it. Mine was doing that so I just decided to put a double roller on there. Simple job...
  20. glhx

    Which distributor should I use?

    Both are 318 2 bbl 1968 points distributor out of a truck Or 1976 electronic distributor out of a charger Car won't be raced. Just some spirited driving here and there I don't know yet if the 68 is worn out but I can put a pertronix kit in there. I don't know much about the mechanical advance...
  21. glhx

    Heater not working

    69 dart I've tested power out of the switch I've tested power out of the resistor and Get power out on both speeds. The resistor gets really hot The motor won't spin. I tried to Hotwire it by running a length of wire right into the heater positive and the heater won't spin This is a non...
  22. glhx

    318 Engine stumble

    Around 15-1700 rpm.....huge stumble When I get pst it the power is there In neutral Slowly raising gas......stumble occurs like a surge. Starting about 15-1700 And doesn't go away Vac at idle is 19 Timing 8° 318 1976 stock and original everything Holley 600 vac sec 1968 points distributor
  23. glhx

    Is this a good cam for my 318

    76 318 Holley 600 Edelbrock street master intake. Headman short headers. Otherwise stock - I also have a 68 318 I could put it in but the motor needs more work as it's been sitting 15 years.
  24. glhx

    Part numbers for 70+ non a/c pulleys

    ive got the 68 engine front end sitting on my 76 timing chain cover. Power steering bracket, alternator bracket, water pump, and pulley set is all 1968. Engine is 76 I would like to convert it back over to the later stuff 70+ And run a denso alternator. My radiator is passenger side pick up...
  25. glhx

    Timing problem

    got his car running. Changed it over to a Holley 600 on the 318 1976 engine 1968 distributor Adjusted the carb by vacuum. I got 11 vacuum out of it. Checked for leaks and couldn't find any. Thought to redo the timing. The car ran and idled fine before I messed with the timing. It had a dead...
  26. glhx

    Problems Putting in the selector shaft seal

    Can I drill the floor board and drive the seal in through the top of the car? It has no carpet. Then just plug the hole. Going to look at this tomorrow When I parked the car for a week or so. The fluid all leaked out. I don't know where from but I'm guessing it came from one of the two seals on...
  27. glhx

    A-Pillar gauge pods for a 69 dart

    i bought a gauge pod set for my Dodge Omni GLH years ago. It was perfect for the car and a universal fit at the time. The cost was inexpensive. This same set would be great for my dart. I don't like the triple gauge set under the dash. It doesn't look clean enough for what I like. Does...
  28. glhx

    kickdown Rod extension?

    - When switching from a 2bbl to a 4bbl The slider rod that connects the the carburetor is 1 1/2"-2" too short. Someone posted an article that says you can make an extension or buy one. Does anyone know where to get one of these Or have a 4bbl slider version for sale My old car is getting...
  29. glhx

    [WANTED] 318 4 barrel kickdown linkage

    looking to put the linkage back together . throttle bracket for a 4 barrel slider piece for the 4 barrel. throttle linkage to carb attachment. Holley 20-7 bracket for the 4160
  30. glhx

    Will a roof skin for a sedan fit a coupe ...69 dart

    looking for a roof skin for my 69 dart. Can I use a 4 door roof skin? I'm thinking not but I want to be sure
Back
Top