Search results for query: *

Rally wheels were not available in '67....1970 was the first year. Is there a date code somewhere near the tire valve hole?

Proper way to measure wheel width... PS...They're nice wheels though.....

Thats a '67 K member...see the single idler arm mount....

With the software change, non Gold members are limited to 15 PM's.

No...early (pre-66) were different slant 6 to V8, but after '67 they're all the same.

Couple things FYI....the 7.25 shock plates only fit 7.25 rear housings...the 8.25, 8.75 and DANA 60 use the larger plates....and the drag link, known in Mopar-speak as center link, is the same for all a bodies '67 and up and all engines.

Yes...'73-'76 disks. The upper arms look to be of that vintage as well.

BTW, those aren't '67 LCA's...they are later ('73-up?)...sway bar tabs are in later position

Yes, you're correct, but the whole assembly will swap into pretty much any '67-69 A_body.

1967-up are all the same....no difference between /6 and V8 link. '66-down were different,/6 and V8. Also, this will not fit early A.

Blaine WA, 98230

Any idea what weight these would be for shipping? Thanks.

You're right Roger....I believe they only fit the wider (5.5") Formula S/ GTS wheels. They will also fit over Rallye's....just remove the trim ring.

They should fit small bolt as well, as they came on GTS's '68/'69

Plymouth emblems on them, so definitely not Dart....Satellite or Barracuda/Fury, etc......

Open the pic in "Paint", drop-down "Image" menu, select "Stretch/Skew", change "Vertical" and "Horizontal" to, for example, 67%, and Save....then upload the saved image.

Wow...that was fast!...super deal....

Thay look to be about 8" wide...rim width is measured inside bead to inside bead.

This posting has expired. (The title on the listings page will be removed in just a few minutes.) I doubt they'd be small bolt pattern. I had a set back in the day...all they came in was Uni-Lug (4.5/4.75 in)

Rocket....no need to apologize....your explanation was right on and very well written! ...especially if English is not your native tongue.

May not make sense, but it's true!

4.5"

Geof....you're right. I took that for someone else to show the difference between 4.5 and 5.5 wheels. The left one is not an 822 wheel. Darwin

66...I have a set (actually 3 sets) of "822" wheels...all mine are 'Made in Canada'. AFAIK, they are just regular 14x5.5 "Swinger/GTS" wheels. Here's a pic or 2 of mine...

What is a "Roulette Wheel" hubcap? Resize them smaller. 800x600 works good. I use Microsoft's ImageResizer PowerToy.

Puncuation makes all the difference.... "No they weren't wheel vintiques wheels"... should be.... "No, they weren't. wheel vintiques wheels." :violent1::banghead::blob:

Those are NICE!!!....and rare...The Dodge ones are plentiful in comparison.