Search results for query: *

Not sure on the front calipers but I have the POL front disk brakes kit and 8.8 disk brake rear and my cop wheels fit fine.

Bleeder could be clogged. Unscrew the bleeder all the way and see if it flows then. If not it may be a residual valve (distribution block)or whatever they were called. That is bias to the front brakes for more pressure if you had disk front and drums back previously.

I finally got my front end mostly together and I must say it all went smooth, thanks to this site and all the knowledge you all shared through out the years. I was shocked that I was able to use the addaco 1.125" front sway bar with the 18X9's. I thought for sure it was going to hit. So far I...

Thanks for the input I do appreciate it guys. I hope they hold up. Ill be putting them on after i finish up the rear suspension. On another note i also got this front sway bar. Not sure of the brand but the bushings are completely shot. Do they look familiar maybe hellwig or off brand?

Oh boy!!! That's not good. I found this link from hot rod magazine that uses the similar kit from POL. Do It! Mopar A-Body 11-Inch Disc Brakes for Under $400! - Hot Rod Network Perofrmance online has the Master Cylinder as well looks like it has gone down in price. 1962-74 Mopar, Dodge...

What wonderful experience today meeting a fellow Mopar enthusiasts on CL's who made me an offer I couldn't refuse. I was able to barter some cash and my radial arm saw for a brand new disk brake conversion kit with the tubular arms and a front stabilizer bar. Have you guys used the...

You are right I got over 100.00 dollars replacing all the components on these 9" brakes. I didnt know any better at first. Once i got the car running I wanted to drive it. When I started digging into the brakes its one thing after another. Now that I got most of it completed my plan is to drive...

A very helpful slantsix.org member Pierre sent me some guide plates they are a little different but should work just fine for the back brakes. However, the anchor post are different between the driver side and passenger. The passenger side works fine with the recess on the post and on the driver...

You wouldn't happen to know where to find those brake shoe anchors, guides, retainers, plate. I have 9" brakes all around and looking for three of them. For the spongy feel I would check your brake lines (hoses) in the front. Sometimes they expand when you put the pressure on them if they are worn.

Yes they should be the same. Can i get the brake shoe guide plates from them?

I have not found those brake retainers/guides/keepers anywhere. Are they just not manufactured anymore? Well if you guys come across any or a parts number at least I appreciate it. Thanks

cosgig, Its the small piece of metal that holds the top of the pads to the back plate in my photo just under the return springs. its like a washer that guides the pads when moving in and out. Not sure if you can see one in 2nd photo above. I attached something like it but these are a...

I know but for right now I'm in the process of just getting it running and driving. I will be doing a disc swap eventually. But for the time being i am going through the car. Its a complete basket case.

I know but for right now I'm in the process of just getting it running and driving. I will be doing a disc swap eventually. But for the time being i am going through the car. Its a complete basket case.

After getting the rear drums done with new everything I started on the front. So far only found one brake guide plate on the whole car. So i need three more and can't seem to find them. I had replaced the master cylinder and bought a new adjustable push rod from doctor diff. As soon as I can...

Thanks I will give napa a shot. I didn't think it was going to be this hard to do the brakes. I'm buying stuff from all over trying to get the back brakes done.

does anyone have a part number for the anchor plates for 9" drums? auto-z, o'rielly, advanced auto don't carry them? thanks

Does anyone have pictures of the rear brake configuration for the 67' 9" drum brakes. My manual covers to many years and variations so its miss leading. I am attempting to redo the brakes but having trouble finding the right parts and the guys at auto zone don't seem to know any better either...