Search results for query: *

For those of you who are still wondering about the windshield and back window molding clips, I have finally installed both my front and back windows and the clips for the moldings were spot on from DMT no problems at all. I did buy some off of eBay first but after comparing them with the ones I...

I also bought a set of front and rear clips from Jim at DMT, his looked a lot more like the oem's that I removed from my 68. If I remember right there were instructions with the front because like you said the 7 green ones ( more square ) only go on the very bottom, dead center and then 3...

Wow I am surprised that you were able to get anything out of her, when I called them she was just a cranky old lady who told me that the sale was private and she would not give out any information about it. I must have caught her on that special day of the month. If anyone happens to see...

They are 3/4" long

I have my dash rolled back right now so I could change my front speaker and also access the factory tach to send it in to be updated with the modern technology. My windshield is currently out so it is a lot easier for me to work on. Here are a few pictures of the bolts (there are 5 of them) and...

So based on the number of members here in Michigan who have responded (0) I think it would be safe to say that either no one went or even knew about this car. Just for ***** and giggles let's say you went to this estate sale and checked this car out and found it to be "the real deal" and...

Did any of you Michigan members happen to go to the estate sale in Royal Oak on the 16th or 17th? There was a red 1968 Barracuda fastback there up for grabs and I was wondering if it was a real Formula S car and if the motor on the pallet was in fact a 340 and if it was was it the original 340...

Monicatti had a Chrysler dealership up on Van Dyke in what I believe was Sterling Heights Michigan, when Chrysler Corp. closed down a bunch of dealerships back in the late 90's early 2000's Monicatti was one of them. They tried to get into the used car business and sell performance parts but as...

I like it when I go to a swap meet/car show and every now and then there is a Barracuda owner there who has the Barracuda song playing and it seems that no one can walk by without joining in or even doing a little dance. Who cares if the song wasn't written about our cars, it shares the same...

I figured that had to be a members car on here. My kid brother sent that to me to enjoy and I truly do.

How true it is.

If our hobby was easy everyone would be doing it, most of my friends are just jealous and wished they could do it. I love going out to the garage even if I don't lift a single tool, sometimes I just love to look at my cars or plan on what my next move will be. One thing about it I don't have to...

No members near Mt. Jackson Va.?

I remember back in the good old days our fun came when the trucks were still carbureted. We would rev them up shut them off pump the accelerator pedal a few times and then just turn the key to the on position which would create a big boom backfire through the tailpipe and scare the HELL out of...

Hey Karl Happy New Year. The example that I am using at 68-70 per hour is from an assembly plant perspective. If the defect is caught at the assembly plant audit per say an unlocked coil pack wire, then the assembly plant will hold their own audit to make sure that there are no more and that...

Remember you have assemblers checking these things at 68 to 70 engines an hour, a double mark, a slip of the marker pen, or just getting bored so decided to do a little coloring who knows. You asked what the marks represent not how to tune up your truck like all the other comments.

So I told you what the markings are from but yet your still not sure and they look suspicious to you. Why answer?????????

I can remember back when I worked at Warren Truck when an item was detected in what they called the "audit hole" that's where the trucks were looked over and inspected by the corporate auditors, if they found something say like a unlocked coil wire connection then the responsible department "in...

I bought out an old swap meet guy a few years back and in with all the parts are a set of rear moldings, at least that's all it says on the box. These moldings are in very nice shape but I do not know what they belong to. They came from a place called Affordable Restoration at 10807 Old Valley...

Problem has been solved, I received a phone call from him and my trim is on it's way home.

This guy came highly recommended, many guys have had him restore their trim and have been very happy with him. Just odd that he would all of the sudden disappear like this, this is what leads me to believe something happened to him and hoping someone knows him and can find out what is going on.

I no longer need any help! Thanks Bob

The problem with the stock power steering coupler was where the shoes went into the coupler, that is where it sticks out and hits the headers. Had the coupler just been the smaller round shape then it would have worked just fine. The Flaming River joint is just about the same diameter as the...

Hey Jesse I had the same problem with my 68 Barracuda when the headers went on, the stock coupler hit the headers. You do not have to dent in your headers, there was no way I was going to do that. I did have to shorten the bottom of my steering column shaft a little bit after I removed the stock...

I had mine done by Rene Garcia, he is in Guadalajara Mexico. Mine were pretty bad but they look like brand new now. It took awhile, I received them back in about 6 months after I shipped them from Michigan to Mexico but they look great and the price a few years ago was great also. Here are a few...

In 1972 I was 18 years old and holding two jobs, so money was no problem. I went to a local Chrysler dealership (Raynal brothers on Chalmers and Harper in Detroit) I ordered a brand new 1972 CUDA 340 4bbl 4 speed Yellow with a black vinyl top and a black interior. The salesman told me about 4...

Frozen Fish anyone???

All right guy's thanks for the replies. I will give it a try. Bob

Does anyone happen to have an Accurate exhaust coupon code that is valid? I looked in the discount thread and nothing. Thanks Bob

Hey Kim my 68 has the flat ones front and rear. Bob