Search results for query: *

Holy ****!!!! Yea that's the one I am looking for. Thanks for the reply. Bob

Does anyone have a source for the metal PCV valve that screws down in the valve cover of a 273 in my 66 barracuda. Thanks Bob

OK so I just went on eBay to see if there were any of these manifolds for sale on there and there are two of them. Both of them have the same style date code as the one that I have. The first one has 10-10 so I figure it's October 10th and that is all that is on the date pad, the second one has...

That's a good guess Rusty , but it is a 1968/69 383 4bbl intake only

I have a factory cast iron intake for a 68/69 383 4bbl #2806301 I have been asked for the casting date which reads 5 - 1 5 is there anyone out there that can translate those numbers? Bob

Wow my vacuum nipple looks like **** in that picture, I think I will have to clean it up and paint it.

I picked up a standard 3/4" sae bolt today, it is just a bit smaller than the 1/2 pipe plug and it screws right into the port. I have a guy that is looking for a plug that size with an o-ring on it because if you look at the top of the port you can see the small embossed area, a flat washer type...

3/8" is too small, and 1/2" is too big. No one in this area carries a 7/16" pipe thread so I thought I ordered the correct one on line and it showed up today WRONG!!! just can't seem to find anything that will fit.

No it is not the same thread, it's a little bigger in size and looks more like a pipe thread.

OK I thought I had this figured out but I was wrong. I can not seem to find the right plug to block off this vacuum port on this CAP intake manifold, the bigger one that is right behind the carb. Does anyone have a picture of what ever was in that port from the factory and does anyone know the...

Does anyone know what size plug I would use in this CAP 4bbl intake manifold 2536771 the large port hole that I am not going to use? It's right next to the vacuum performance gauge port that I am going to use. Every plumbing shop or hardware shop in the area has either 1/2" which is too big or...

I wouldn't mind finding all that stuff, I just put up a wanted ad so I will wait and see what happens. Thanks Bob

I am going to try a wanted ad for the upper rod with the slide. You never know I might get lucky maybe someone out there has one. Thanks Bob

See this is what I am talking about. So are you telling me that the kick down bracket that bolts to the back of the drivers side head needs to be removed and replaced with the 340 throttle bracket that is shown in Karls thread. Then I still need to find the slotted upper kick down rod, if you...

OK I have been searching through the threads on how and what is needed to switch over from my 2bbl carb to 4bbl Holly carb on my 273, 904 trans for my 66 upper kick down rod. The kick down rod's that are shown in just about every thread is different than the one that I have on my 66. Here are...

I have been looking at both the Holly and the Edelbrock. I was thinking about the HLY 0-4776S and the EDL 1902, 1905, 1404, and the 1405 all with manual chokes and manual secondaries but all require an adapter plate to bolt on the stock factory commando 273 intake. I think I am just going to use...

Are there any new out of the box 500 cfm or 600 cfm manual choke, manual secondaries carbs that will bolt up to a 1966 Commando intake without using a carb spacer? Thanks Bob

I have a 1966/67 273 cast iron 4 bbl intake, part # 2536771 which is the CAP intake and I was thinking about putting the # 4122S Carter AFB on it if I can locate one. I was wondering if this combo was any good, I just like the idea of up-grading the correct year parts on my 1966 273. I do not...

Hey POPS, I just replaced the tank and sending unit in my 66. Not to change your mind about where to get your stuff from but I bought my tank off of eBay from a company called Maryland Quality Products, the price was $159.00 shipped to my front door. They have a couple of different listings on...

I bought the new one for my 66 from there, they were great. The tank was real nice and the shipping was very fast. But look at all their adds they have a buy it now for $159.00 with free shipping you save $4.00 and I rather it was in my pocket. Bob