Search results for query: *

  1. Daves69

    Friends, lovers, Chevy cretins....Let's unf*ck a Six Pack

    Curious, what are the List #s on those? TIA
  2. Daves69

    Friends, lovers, Chevy cretins....Let's unf*ck a Six Pack

    IMO, try it with that '69-'70 bracket in your 1st picture first. There isn't one exclusively for a six pack. My stock '69 bb 4bbl worked but had to be pulled further back in the bracket. The plates still opened fully.
  3. Daves69

    Friends, lovers, Chevy cretins....Let's unf*ck a Six Pack

    Hmmm, as is, does this pivot move and cause the outboards to open when you open the center carb or does it stay where its at? Its what you need.................
  4. Daves69

    Rebuilding a Holley 600

    FWIW, Make absolutely sure the floats are good and the needle and seats shut down flow for both bowls. You don't need one failing and polluting your crankcase with gas.
  5. Daves69

    Will it fit?

    Check that push rod like Professor say's. If that's the pump you're asking about, you'll certainly have hard fuel line routing issues. Just buy the correct replacement.
  6. Daves69

    What will cause my float bowls to go dry

    Once the bowl level drains below the seat housing and an air break is formed, can the fuel continue to drain the bowl empty?
  7. Daves69

    What will cause my float bowls to go dry

    Umm, maybe the carb is leaking fuel? Black and eye watering smoke/fumes out the tailpipe? Is your oil level going up and it smells like gas?
  8. Daves69

    does Stabil work?

    I've used Stabil in all the fuel run through my 2008 Glastron Holley 2300. I purchased this boat new. It sits dormant for about 6 months over winter. With full tank of fuel with Stabil. The float bowl when I first pulled it down in 2015......... The same float bowl in 2021...
  9. Daves69

    Six Pack Pix

    My '70 440 auto setup I've had since '78. It's looking for a new home..............
  10. Daves69

    67 gas tank to a 68 69 one

    Where the straps run.......
  11. Daves69

    Can Bend gas tank seam over?

    Maybe sandwich the corner between two 1/8" flats and bend with an adjustable wrench kind'a sort'a..... A corner of my '69 tank was bent from factory...........
  12. Daves69

    Eddy 1405 questions

    FWIW, if that adjustment requires bending the rod, I think I'd measure over the tips with a caliper before (JIC).
  13. Daves69

    Cleaning a dusty carb.

    Don't let anything go. Ya' never know what you're walking around with. Just had my second OH surgery August 2.
  14. Daves69

    Cleaning a dusty carb.

    Car doesn't sound too bad Steve, but kinda' worried about you at the 26 second of the video!:D:steering: Ya' might run it in the dark and look for spark scatter/arching.
  15. Daves69

    Cleaning a dusty carb.

    Yikes Steve, trying to revive 4 year old gas might be a hard task. I think I'd drain it for the lawn mower, weed whacker, and possibly the snow thrower!
  16. Daves69

    Chicago Carburetor?

    Evidently, they hi-tailed out of Illinois. Found a receipt from 2016...................
  17. Daves69

    Chicago Carburetor?

    I believe they are affiliated. I recall their sign out front as well in Justice. I'm thinking this may be them............ | eBay
  18. Daves69

    Chicago Carburetor?

    Probably got taxed out of the state!
  19. Daves69

    Chicago Carburetor?

    :eek:Oregon!:wtf: They were in Justice, IL. That was driving distance.
  20. Daves69

    Chicago Carburetor?

    By chance did they mention their shop location?
  21. Daves69

    how to check a float

    Are they all made the same? IMO, I can't imagine a particular weight as a gauge to go by. I'm thinking buoyancy needs to overcome a pressure in a given range for the application. The know the outboards on my six pack tend to weaken over time. Is there a flooding issue? Is it adjusted properly...
  22. Daves69

    MODIFIED 3 2BBL AIR CLEANER

    FWIW, Some of these may not be real friendly to an Abody with a 2 speed wiper motor. AC can even be an issue. Below is a "shaker " base plate on my 440 six pack. It only needed a small bend to fit under the motor and the rubber seal cutout.... My '72 air grabber 4bbl base plate might need to...
  23. Daves69

    MODIFIED 3 2BBL AIR CLEANER

    ............ Nick's Garage - Air Cleaner Identification (nicksgarage.com)
  24. Daves69

    Fuel pump question....

    Ditto the previous question. Are you sure your Holley center hung float bowl is emptying in just a couple days without it leaking and leaving some evidence? I think I'd run it a while, park it, pull the air cleaner off, pull the sight plug, and verify the bowl is full. The next time I go to...
  25. Daves69

    Fuel pump arm question

    Some rebuild / assembly tips............
  26. Daves69

    Sticking throttle cable

    What are ya' working on? Had a similar issue on a '68 RR (IIRC). Found the rear of the pedal had a wear spot causing the hang up.
  27. Daves69

    How can I tell if my outboards are opening on a six pack?

    Mount a mini cam with a cell phone next to your tach? such as...... USB Snake Inspection Camera, FANTRONICS USB C Borescope, Scope Camera with 8 LED Lights for (16.4ft) OTG Android Phone, Windows PC, MacBook: Amazon.com: Industrial & Scientific
  28. Daves69

    Is there a mat or cushion between the fuel tank and body?

    My '69 had the felt below........ MOPAR - A Body 1967-69 - 68 Plymouth Barracuda - Page 1 - Detroit Muscle Technologies, LLC
  29. Daves69

    Six pack power valve....

    Have you been here.............
  30. Daves69

    Carter Fuel pump fittings

    I'd check the local Advance Auto Doorman rack. Take the tube with nut or equivalent with. They might surprise you.
Back
Top