Search results for query: *

No ****! Lol!

I was there today. There were boxes of units in the shop and they had a guy in there mounting up a dual quad set up for testing. They test all units on running engines before they send them out to the customers to ensure they are up to the task.

I have the AEM Uego. It Data Logs as well and uses the Bosch 02 Sensor. All of these unit's are basically the same. I don't like how the Innovative has the brain portion out by the heat, it will not last as long like that, heat kills. Unless the newer models are different. AEM runs on...

Just found out SD Concepts makes the CPS adapter for R-RB & Small Blocks. I am going to order a few of them so they are on my parts shelf! They are $35.00 Each plus shipping. http://sdconcepts.com Cam Position Sensor is Doorman Part # 689-200 , $34.08 & Free Shipping that is cheap...

I found the Jeep cam sync dizzy. See post #4 , this guy says they cost $40.00........... It looks super clean too. You may need to make a spacer to take up some room between the block and the base of it. http://www.dodgecharger.com/forum/index.php/topic,99432.0.html

Yes 4150 I would guess you would run out of fuel at 900-1000 on e85, Again that is a guess. I will soon find out once it cools off. Could possibly get more if I can find a way to increase the FP or dump theirs and run my own external FP Regulator. Or if I can find bigger injectors and just...

I have had mine for a while now. It is just too dam hot to install it. This is supposed to be fun! haha, no fun in 106* weather.

I forgot where I seen it but there was a guy using a newer jeep distributor that was cam signal only that had no distributor cap and billet looking, while using coil near plug. Was a very clean set up.

Don't waste your time on an MSD flying magnet crank trigger. They work like crap on EFI. They only send data every 90* of crank rotation. Been there and done that..... Dual sync distributors are junk as well, I tried that too. Not enough info is sent to the ECU Get a 36-1 wheel for the crank...

Sounds good!

I seen their self contained fuel pump canister when I went to their shop. It is a sweet looking piece and a lot smaller than you would think. You will like it!

So it will be running tomorrow on e85 I suppose! haha

Good on the fuel line routing! You have done your homework. Yeah the newer cars have knock sensors as well & they are mostly all aluminum. Just be careful of the readings. The temps under the butterfly's on the intake will be a lot warmer than in the air cleaner. You don't want it detonating...

Can you explain how you are routing your fuel lines. From tank to pump to what first? Where is your return plumbed into the system? If you have the fuel pump hitting the regulator first you are asking for problems. Guys have burnt up pistons like that with EFI. You may have it like that. I can't...

Here is the Video... What a Joke! I got a camaaaaro... Lol https://youtu.be/I9W2RnexOe4

I was contemplating the single unit, however after talking to the guy on the phone today I have changed my mind on that unit. Guy was... How do I put it, a Straight out A. Hole! All he kept saying to me is they are good for 6-8 lbs of boost, over and over again. Their site says you can get more...

Yes, I will dial it all in on e85 first.

Yeah, they are right down the street from me. If I have problems it will be easy for me to go and throw it though their front window! Haha I was just about to buy an e85 carb. This system is only $300.00 more from the one I was going to buy. This is not a whole lot of $$ so I am not worried...

Yes of course. 410 CI & It is 9:1 Compression. This is the motor that I built for my Twin Turbo 67 Dart project that I sold minus the motor & trans. It has custom Weisco Pistons with the top ring lan down on the piston with extra meat, ready for NOS, Boost whatever! Tool Steel piston pins...

I might have answered you wrong if you are talking about he smoker.. haha $1100.00 is what I got into the smoker. To buy one like that would be in the 4+ k range and it would still be a cookie cutter & not custom. Mine has a Double wall insulated fire box and a lot of other gizmo's I...

The Dual set up is $6950.00 .... If I ever did that dual system I would re configure the belt and how it wraps around the bottom pulley. If you are not wrapping at lease 3/4 around the belt will slip like a MO FOOO. I been there when I was in the buggy scene. I watched a couple vids of them...

Lol. I have to finish up on the Reverse Flow Smoker I am building. After that I will be ape **** back on the car to get this installed and the Supercharger right after I know this system is dialed in on e85. Picture of the smoker. Everything was hand built by me, wheels and all. Only thing I...

Add this to the mix! haha The guys at FiTech told me about this company today! http://www.torqstorm.com/kits_twin_small-block-mopar.html

I will use the one I picked up today. That other system will need a different intake or a modified intake with bungs. If I ever get close to tapping the one I bought today out for sure I would upgrade it. Time will tell.

Just picked up the system from Ken at Fitech. I shot the **** with them for at least 1 hour picking their brains on everything and going over my install, looking at their shop etc. Cool stuff! Ken did verify that in the next 3-4 months or so they will be coming out with MPFI, fuel rail with...

Lol. Tony don't answer to nobody. Rides Solo!! haha

Headed to pick it up today. They are about 30 Minutes from my house. I read all the instructions already and pretty much have them memorized.

Lol' someone's gotta do it! When I called today they were saying their sales are starting to surpass their current inventory. Huge increase in sales the last few weeks & they need to increase production & inventory. System is going to be a big hit for sure with the self tune capability & the...

Funny, there are always the nay Sayers that don't ever do anything but bash on everything. There are talkers and doers... I am a doer. System is bought. If it don't work out at least I can say I tried something new! Lol Plus yes this system can be pro tuned by plugging in your lap top. I...

Wireweld, Post a video of your car running. Would love to hear it crackle!