Search results for query: *

Yeah, I think that's pretty much what I was looking for. Seems like it should be a direct swap with the one I have from the looks of it. What would you want for it?

Does anyone out there happen to have a 67 Dart speedometer? I've been working on adapting a motor to drive a stock speedo for my transmission conversion and have something semi functional with the later model speedo, but got to thinking that the screw on style system the 67 used would probably...

Got a set on the way. Thanks FABO!

Windshield gasket started leaking pretty bad on my 67 Dart, so I'm planning to just replace it with the 68/9 style gasket and trim instead. Looking for a complete set of driver quality windshield trim for a 2 door hardtop (non-post). Shipping would be to 66049, would like to keep it under $100...

Thanks! I'll see what I can hunt down at the local part stores. Have my cluster out now, so the experimenting can begin soon.

Was there any particular sending unit that you used (as in from a certain car)? So, if I went to the parts store and wanted to buy a sending unit for the car, do I just pick some random car or do you know what yours is off of?

I've got a lead on a few so far, I'll see how things work out and let you know. Hopefully I can get it done on my first attempt without mangling things too bad.

That's exactly what I was planning! Did you start with a temp gauge as well for the base? Looks more like a fuel gauge from the screen printing, but I'm thinking you could have repainted it or used temp gauge guts behind a fuel gauge face. Any tips for sensor selection and calibration or did...

Bingo, that's pretty much what I was thinking. Was going to see if I could dig up any info on various oil pressures sensors to get an idea what kind of range of output they had. Most gauges tend to be 0-5v, so I think it would be pretty straightforward. Worst case even if it isn't super...

I'm looking at ways to try to put an oil pressure gauge in my dash cluster to get rid of my bolt on gauge pod under the dash and have an idea on converting a temp gauge to read an oil pressure sender. I'd like to mess with a spare one that works. Would prefer something in decent shape as I'd...

Wow, that was way more responses than I was expecting. And quick too! Should have one on the way now. Thanks for all the offers! If I end up needing another I'll be sure to check in with you all.

I'm looking for a somewhat junk speedo gauge to do some experimenting with. A recent trans swap has left me without a mechanical drive cable, so I wanted to mess with some ideas to make my own electronic to manual conversion kit and didn't want to butcher my nice speedometer. I have the standard...

Like the title suggests I'm looking for a stock replacement piston rod combo for my 5.7 engine. I would appreciate if it still has the stock rings as well, but I can probably work around it. It needs to be from the driver's side, as they are actually different between banks. Hoping someone...

Thanks for the replies, saw that one in Wichita, but never got an answer back. It looks like I can buy one I thought was gone, so pursuing that now. It's a car setup though and missing the tensioner and idler pulleys. It'll need an alternator too and I'm pretty sure I need to find normal...

Like the title says, I'm in the market for a 5.7 hemi. I'd prefer to go with the truck cover for my setup as I have a radiator that will fit the truck outlets already. I don't need a harness or computer, and really I don't even necessarily need an intake or oil pan as I'll have to swap them...

Okay, thanks for checking it out for me. Also, unless your location in your avatar lies, you might check what shipping would be like. I guess it wouldn't be very hard to just toss it in a tube with some packing peanuts. I may try to do some searching around local salvage yards, but it's...

I have a driveshaft in my 67 Dart that I believe is originally out of a 73-76 Duster or something similar. It measures approximately 52.75" between the center of the U-joint yokes, and according to this page: http://board.moparts.org/ubbthreads/upload2/4563759-PartNoDriveshafts.pdf it would be...

Just picked up a back seat today, thanks again Bobby and everyone else that gave me offers. The car looks so much better now without stuff missing =P.

Picked up a set today, thanks again for all the offers and help.

Dealing now with someone local, hopefully should know by the end of the week, thanks for the responses. I'll let you know how it pans out.

I need a set of the splash shields that go directly behind the front wheels that cover the hood spring and door hinge area. Does anyone remake these pieces? I have heard that the 73-76 ones were plastic, would these fit on a 67 Dart? I would prefer the plastic ones so I don't have to worry...

No problem, I'd probably do the same thing, lol.

Well, this one isn't quite the same, but if you think it would work for you we can talk. It looks like it's probably an aftermarket or homemade piece. It's set up to be bolt in, but I don't see any reason you couldn't weld it in. It's a little short and you'd have to drill hole in the top for...

I think I might be able to help you. I don't suppose you have a picture of what you need? I bought a project car that had what I've been told is a console bracket in one of the several boxes I got with it. I can send you a picture of it if you want to compare or know what it looks like.

Another place you might look is McMaster-Carr. You can buy pretty much anything you would ever need to put a car together there, lol. I did a project back in college that used spiral locks for it and I think we got them from there. They are really a car place, but I think if you just put in...

I think the springs are available through car parts stores, maybe Napa or something. I had a huge ordeal trying to find the strut rod itself until a member was nice enough to give me a pair. I remember seeing springs listed online on some store site, but don't remember which.

I'm looking for a rear spring offset kit. I've got a 67 Dart that I just got a new rear for and wanted to do the offset kit when I put it in since I've got everything out and need to move the perches anyway. Hoping someone out there wants to upgrade all the way to the frame relocation and...

Like everyone else in the world I'm looking for an 8.75 rear end for my 67 Dart. I need something with the big bolt pattern axles already, and would greatly prefer something with a Sure Grip, though if the price is right I might take something without. B body or A body works fine as I intend...

In talks with Wilbanks now, he's close enough that I would be able to pick it up myself. I'll let you other guys know if it falls through.

As the title suggests, I'm looking for a set of armrest pads for the front armrests on a 67 Dart hardtop. Don't think it makes a difference, but it's a 270 model. I just need the pads, I have good bases, would prefer black and in good shape with no cracks. I can post a picture if it would...