Search results for query: *

  1. Map63Vette

    [SOLD] Electronic small block distributor

    Yeah, this was used on a Megasquirt system, so I think that was the intent. This was effectively used as a cam/crank sensor, so the advance was all done in the software tuning, not mechanically. Nice to know what it was actually originally used for though. Could a vacuum advance be added...
  2. Map63Vette

    [FOR SALE] 67 Dart factory fuel tank

    I can say that the straps were very close on mine and I didn't have a lot of extra bolt sticking through the nut, but it was installed that way in my car for better or worse and functioned. I don't for sure know if the front of the straps was in the factory location though, so that could also...
  3. Map63Vette

    [FOR SALE] 67 Dart factory fuel tank

    I thought the tank was the same physical size, it just had the recesses for the straps in a different place. So it would fit a later car, but not necessarily quite as nicely. My car also had the rear trunk pan replaced when I bought it though. It had the straps front to back for what it's...
  4. Map63Vette

    [SOLD] Electronic small block distributor

    I've got an electronic pickup small block distributor up for sale. Can't say too much about this as I got it as part of a kit when I bought my fuel injection system. Came off of a 340 and has had the plug converter to weather pack style terminals, but should be easy enough to change back to a...
  5. Map63Vette

    [FOR SALE] Small block starter

    I've got the old starter out of my 318 up for sale. When I swapped over to my 5.7 Hemi this came out and has been sitting around ever since. I sold the old engine and the buyer didn't want or need it, so it's just been sitting in the shed since then. Worked just fine when it was in the car...
  6. Map63Vette

    [FOR SALE] Solid copper small block exhaust gaskets

    I've got a set of solid copper exhaust gaskets that I got with my car several years ago. They are Maxx Performance brand and claim they fit 273-318 V8s from 67-74, though I think they might fit a 340 or 360 as well. Still new in the packaging. Ended up doing an engine swap in my car and never...
  7. Map63Vette

    [FOR SALE] 67 Dart factory fuel tank

    I've got a factory fuel tank out of my 67 Dart up for sale. I think this will also fit a 68 and 69, but not 100% sure. I believe all that changed was how the straps went around the tank and maybe the filler neck gasket, but I think the filler neck is still in the same place. Worked great in...
  8. Map63Vette

    [SOLD] Aluminum 5.7 Hemi oil pan (needs repair)

    Back when I first did my 5.7 Hemi swap I got an aluminum mid sump pan that I had on the car for a year or two (looks similar to Weldtech or Charlie's oil pan, but didn't have a brand mentioned when it was purchased). I ended up having some leaking problems with it and when I looked closer it...
  9. Map63Vette

    [SOLD] 4 speed and associated parts

    Transmission is finally gone. Still have the crossmember if anyone is interested.
  10. Map63Vette

    [SOLD] 4 speed and associated parts

    I do still have the small retainer installed on the trans, but it's a four bolt mount, so I'm not sure it would work for you. I still have the whole transmission and crossmember for anyone interested. Can throw in the clutch plate and throwout bearing as well.
  11. Map63Vette

    Power Steering Box and Pump

    Finally sold and shipped, thanks for the ad space FABO!
  12. Map63Vette

    [SOLD] 4 speed and associated parts

    Standard 4 speed, I believe it's a 73 from the numbers on it. Should make it the T/A gear ratios listed here (scroll down a bit, table on the right): http://www.allpar.com/mopar/transmissions/four-speed-manual.html
  13. Map63Vette

    Power Steering Box and Pump

    Still have these sitting around if someone would like to make an offer. Would make a great Christmas present for the Mopar person in your life!
  14. Map63Vette

    [SOLD] 4 speed and associated parts

    Still have the trans kicking around. Willing to entertain offers.
  15. Map63Vette

    [SOLD] 4 speed and associated parts

    Hump is sold, still left is trans itself, transmission crossmember, and clutch plate (will throw in throwout bearing with it as well).
  16. Map63Vette

    [SOLD] 4 speed and associated parts

    Okay, shifter is gone now as well. All that's left is the trans itself, the clutch plate, and the floor hump.
  17. Map63Vette

    [SOLD] 4 speed and associated parts

    Okay, clutch linkage and spare shift linkage parts are gone now as well. All that's left is the transmission itself (now with smaller bearing retainer), transmisison crossmember, shifter with handle, clutch plate (RAM 303M model), and floor hump.
  18. Map63Vette

    [SOLD] 4 speed and associated parts

    Bellhousing is now spoken for. Still up for grabs is the shifter and handle, clutch linkage, clutch disk, old (non-Brewers) linkage, floor hump, crossmember, and transmission itself. Edit: 5.125" bearing retainer is also gone with the bellhousing, trans will be sold with original smaller one...
  19. Map63Vette

    [SOLD] 4 speed and associated parts

    Okay, at the point that I'll consider splitting up the parts now for anyone interested. PM for prices on whatever parts you're interested in and I'll see what I can do.
  20. Map63Vette

    [SOLD] 4 speed and associated parts

    Okay, this is long overdue but I couldn't find the pictures at the time and didn't feel like dragging all the parts back out. Was cleaning up other pictures on my phone and found them again, so here's what's all in the package. The only other thing that's included but not shown that I can think...
  21. Map63Vette

    Power Steering Box and Pump

    Still have the whole setup. Would like to clean out some shed room for spring cleaning.
  22. Map63Vette

    [SOLD] 4 speed and associated parts

    Sorry all, forgot to check back here. Anyway, what it's out of depends on what part you're talking about unfortunately. For the most part I believe it to be either all A body or F body. The trans is an A body tailshaft and what appears to be a 73 model year from what I can make out of the...
  23. Map63Vette

    [SOLD] 4 speed and associated parts

    Still have all the parts kicking around if anyone is interested in a spring project. Got to looking and I also have a decent 4 speed hump that can go with it. Cut it out of my car and I think it's pretty salvageable. Mostly cut around it and not the hump itself, so should have plenty of...
  24. Map63Vette

    [SOLD] 4 speed and associated parts

    Link to the ad for pictures and info http://lawrence.craigslist.org/pts/4197972961.html. List of parts: Trans - 73 model year I believe, 23 spline input has been shortened ~5/8 (should work fine with register style bushing/bearing), fairly recent rebuild, crossmember included Bellhousing -...
  25. Map63Vette

    67 Dart K Frame

    Sold locally, thanks for the ad!
  26. Map63Vette

    F Body 8 1/4 for sale

    Sold locally a while back. Thanks for the ad FABO!
  27. Map63Vette

    Set of 8 39 lb/hr injectors

    Pretty late notice, but figured I should probably update some of my old ads. Managed to sell these locally a while back.
  28. Map63Vette

    Holley 600 cfm vac secondaries

    Sold! Thanks for the ad FABO!
  29. Map63Vette

    Holley 600 cfm vac secondaries

    Yes sir! That works easiest for me.
  30. Map63Vette

    67 Dart Idler Arm

    Still got it if anyone is interested.
Back
Top