Search results for query: *

  1. Mattax

    [WANTED] SB throttle cable

    I had the original /6 cable fray and stick on my car accelerating onto RT 22 in NJ - very exciting. Tap agiain and rpm went up. foot on the brake move over 3 lanes and turn the key to off. Anyway. Yes you need to know the way the cable clips into the firewall. IIRC '67 is a U clip or E-clip...
  2. Mattax

    [WANTED] Wanted 75 or 76 under dash wiring harness

    1976 model year is radically different than '75
  3. Mattax

    [WANTED] Wiper Blade 15" Refills 1972 Dodge Dart Swinger

    Show the wiper arms on your car. Chrysler bought from both Trico and Anco. The Anco are 'push button' and use two claws. The trico I haven't seen info on but with a photo it will be easier to figure out what you need.
  4. Mattax

    [Found!] Notchback Window Felt

    I sent Restoration Specialties Supply the originals from my '67 notchback and they made copies with the correct profile. They kept the originals for reference so they could make up the same for others. At the time I couldn't find any replacements that were actually correct.
  5. Mattax

    [WANTED] 56 Packard terminals 14-16ga.

    Eventually I've made everything work that I've needed to.
  6. Mattax

    [WANTED] 56 Packard terminals 14-16ga.

    This is why I have somehting like 5 open barrel crimpers now. The Astro with adjustble jaws, both 'Packard' copies made for American Wire, The one I needed for small terminals, and one similar to the MAC Toolmanmike mentioned.
  7. Mattax

    [WANTED] 56 Packard terminals 14-16ga.

    It looks like there is not enough crush force on that terminal. Is that as far as the jaws close?
  8. Mattax

    [WANTED] 56 Packard terminals 14-16ga.

    I've only seen the male terminals sold as 56 series. Those look like they are made from thicker material than some of the females shown above. You'll have to experiment to figure out which crimp position and tool works for the heavier gage metal. There's others here who know much more about...
  9. Mattax

    [WANTED] 67 barracuda steering wheel

    67 cuda steering wheel I'll add a photo to that thread.
  10. Mattax

    [WANTED] 67 barracuda under dash wiring and fusable linkharness

    You can see the fusible link in the engine harness here: question on the main harness plug on firewall Original will have a yellow flag. The one in the post linked above is a Year One/M&H harness I installed 20 years ago. Here's the original engine harness from my '67. Yes I kept it and use it...
  11. Mattax

    [WANTED] 67 barracuda under dash wiring and fusable linkharness

    @toolmanmike had/has an underdash (instrument) harness. It's not 100% complete but might be enough if you've got most of the original. Fusible link a part of the main engine compartment harness. If you just need a link, Bill & Rose Evans sells reproductions.
  12. Mattax

    [Found!] Ignition switch

    FYI I believe 1969 is a one year only switch. Why do 68 & 69 dart iginition switches have different # ground plug ins?
  13. Mattax

    [Found!] Wiring harness section for 1969 Dart

    Could it be on the wiper motor?
  14. Mattax

    [Found!] Proportioning Valve disc/drum setup

    Correct, a proportioning valve is added to the line running to the rear brakes. You can use a small adjustable aftermarket one, or an original (or reproduction). The originals look like the state of Texas (sortof) - Doing a search here for Texas valve should urn up some photos showing one...
  15. Mattax

    [WANTED] Non A/C 67+ defroster hoses (ducts) & 67 Barracuda d/s manual lock rod

    Update. Turns out the one defrost hose was for early A. Still looking for both hoses if in decent condition.
  16. Mattax

    [WANTED] Non A/C 67+ defroster hoses (ducts) & 67 Barracuda d/s manual lock rod

    Thanks for looking Steve. Barracuakid had it and the grommet/bushing. The only item here still looking for is a non a/c passenger side defroster hose. That's the shorter one (21" according toth ebook) with 2" inlet
  17. Mattax

    [WANTED] Non A/C 67+ defroster hoses (ducts) & 67 Barracuda d/s manual lock rod

    Barracudakid should have it. I don't know if the same bushing was used left and right. Way different than the two I have. These are almost certainly one side only.
  18. Mattax

    [Found!] Fuse box terminals, Headlight Switch Connector, Fuel sender connector with wire,

    Thanks. Good to know. My friend in US tried to get some items from UK and Royal Post apparently said it couldn't be sent at this time. @65 Dartman Barracudakid seems to have everything but if that doesn't work out on the connector, or the fuse terminals, I'll PM you guys.
  19. Mattax

    [Found!] Fuse box terminals, Headlight Switch Connector, Fuel sender connector with wire,

    Those would work. Barracudakid told me he had everything I needed for my 67, but not sure if he was referring to this want ad, or just the other one. I'll find out later today. Any idea whether shipping across the border will be an issue ?
  20. Mattax

    [WANTED] Non A/C 67+ defroster hoses (ducts) & 67 Barracuda d/s manual lock rod

    Yes that looks right. I'll go down to the garage and take a photo of the one I have. It has a hook on it. Someone can use it if we can identify it. Maybe its time to take another look at the other mysery in the front door - there's play when the window is rolled up.
  21. Mattax

    [WANTED] Non A/C 67+ defroster hoses (ducts) & 67 Barracuda d/s manual lock rod

    That would be great. I bought a new plastic clip 25 years ago, which I still have, but it must be for another model or the right side.
  22. Mattax

    [WANTED] Non A/C 67+ defroster hoses (ducts) & 67 Barracuda d/s manual lock rod

    Well, when you dig the car stuff out of winter hibernation, I might still be looking. This one is a mystery to me that I've just ignored for a long time. When I clear some space I'll take the inside panel off both sides and maybe I can figure out what it ought to be. But if someone already...
  23. Mattax

    [WANTED] Non A/C 67+ defroster hoses (ducts) & 67 Barracuda d/s manual lock rod

    Update: Looking for '67 up non-A/C defroster hoses in better condition than mine. Doesn't have to be perfect. I can wrap a hole in gaffers tape or similar. I'll do that to mine but would prefer to start with nicer ones if I can. Here's mine. Found! 1967 Two door, Manual door lock rod and...
  24. Mattax

    [Found!] Fuse box terminals, Headlight Switch Connector, Fuel sender connector with wire,

    Looking for the new or used. For my '67 Barracuda but all these were used on many years and models. Updated Headlight Switch connector, 2258102 FOUND Fuse box terminals FOUND Fuse holder with male spade terminal rivetted on. Fuse holder with crimp terminal. The ones in the A/C or rear...
  25. Mattax

    [WANTED] 67 Barracuda Wiper Switch

    Which wiper motor? Post a photo if that's easier. There are at least three different motors used in '67 Some photos here: Wiper Motor Wires
  26. Mattax

    [WANTED] Ignition connector

    Did the plastic disintegrate but the terminals are OK? Generally better off using the existing terminals or crimping new ones on (rather than splicing).
  27. Mattax

    [WANTED] strut rods

    there' two types for the 2nd generation A's. Not sure if there is a third type for the 1st gen.
  28. Mattax

    [Found!] Smallblock rebuild book

    Try some of the other used book services too. ABE books is one and there are others. I think something about 'zons system drives the asking price on some books - which may be rare as in out of print, but are not actually valuable, especially when beat up.
Back
Top