Search results for query: *

Reilly Mororsports.., Look at the AlterKtion. Also try HemiDenny front suspension too. Riddler

I looked into it when I was doing sound deadening. There is a body shop applicator than can put the 2 part mix into the voids for wreck repairs. The product was cheap. About $75-100 a tube and that's enough to do an entire car due to expansion. The special hand held gun to inject this was...

Here read this. http://www.forabodiesonly.com/mopar/showthread.php?t=101437&highlight=link Most of the measurements can be found here as well as whats needed. Also you might need custom measurements when you build it yourself. You could always just buy the RMS Street Link setup and be...

I've got pics of the XV Motorsports one. Pretty much the same. I can't post till later as I'm at work. Riddler

I've got a PS box from a 76 Duster. I'll have to check and see what else I've got... Might have the entire system, plus I'm close... Riddler

Thanks johnparts. Much appreciated. While your at it, wrap up that 6.1 hemi and send it also. LOL Riddler

Anyone have a 75-76 Duster parts manual? If so could you look up the part number for this rubber grommet. I've called a bunch of places and no one seems to have this grommet or know where to get it. Riddler

Dang I thought that link was for the part needed. I've never had s problem finding the part I need. It's weird... Makes me wonder if the rubber grommet was only sold with the floor plate. Riddler

My car is a 1976 but it's the as the 1975 Dusters. I've been searching all day to no avail. Riddler

Does your parts manual have 75-76 Dusters or Dart Sports? I've yet to find a parts manual for these cars. Riddler

Yeah I'm guessing this is not a part anyone is repopping. I'm really hoping to find one, heck even a used one in good shape. Anyone have a parts manual? I don't have one. Riddler

They have the foam yes, $4.00. I'm looking for the rubber grommet. The factory service manual I have calls it, "Steering Column Floor Plate Grommet" I cannot locate one for the life of me. Riddler

Looking for the rubber oring that goes on this steering column bracket for a 75-76 Duster. Is there anyone repoping these? Mines old and falling apart. Thanks. Riddler

I did my Wilwood like this... Spinning them with the safety wire plyers is the best way. Harbour Freight has a set for not alot of money. Riddler

I'm mocking up the stock floor shift steering column in my car and I've read the Reilly Motorsports Alterktion instructions. Near the back it says I might have to cut down the column outer tube some as it might hit the engine when it's in the car. Guess what, it hits the engine (head). With...

I'm pretty sure the 8 1/4" is the same as the 8 3/4". But give RMS a call. Riddler

I've got the same setup front and rear with the QA1's. I've got the coilovers sitting at base height and mine sits so much higher. Any chance you could reveal how you got the car that low? Thanks, Riddler

Hemidenny sells a setup as well. Might want to speak with him. Rms is also tried and true. Riddler

I just took the rollpin out of my column as I'm using the setup for the alterkation. I'll have to check and see if I still have but I should in the scrap metal box. I'll look in the next day or so and if I do I'll get your address and send it off. Riddler

We have For Sale Forums for that. This forum is for the discussion of Chassis and Suspension. :) Riddler

Well to be honest it'll stiffen the steering and handling of the car up quite a bit. The front of our cars tend to wander and these being stiffer with harder bushings will prevent the car from wandering as much. As for feeling the bumps and such more, I highly doubt it as the torsen bars are...

What kind of Air shocks? Riddler

I've been selling rear spring relocation boxes. Not torque boxes. I do have plans to make some but I have to develop some patterns off my Duster and take them in and have them done. Most likely won't make many for the masses. Riddler

I think your making a big deal out of nothing. The mustang II front end is a commonly used front end for hot rodders. The parts are cheap and easy to get. The mustang II front end is wider than the A body front end. Imagine if a corvette or Viper front end was used. I'm sure it would...

Ver nice, but you can't read the measurements. I printed them out thinking I could use them to build a set and nope the measurements are so small they don't print but a small dot. Riddler

I have a K frame sitting here, the guy who bought my front suspension didn't need it. If you need pictures of anything specific. Riddler

I don't know if CAP uses a jig or not. I just would find it hard to believe they wouldn't have one. My offer still stands, I'd be willing to test one out. :) Riddler

Not all people living near him defend him. I live less than 25 miles from the owner in Windsor, ON. I've seen a couple of his products in person at a local swap meet. Bare in mind these products were used off his drag dart, so I assumed the quality was slightly higher since they were on his...

Well after speaking to Peter it looks as though I will not be chosen. XV is looking for a car that can be driven and runs well. Shame, mines all apart and that makes it easy to do measurements and modifications. Good luck to everyone else who submitted. Riddler

I left my name and was told Paul would be calling today. Unfortunatly I'm at work in meetings. I'll have to call them back later on today. Hopefully I get to speak with them prior to a decision being made. Riddler