Search results for query: *

  1. Tony Fields

    Classic with Halo lights?

    What Del said
  2. Tony Fields

    Hemi hood scoop types?

    AAR also...may as well go with four, they come two to a pack. https://www.aarqualityfiberglass.com/products/stantion-post-set
  3. Tony Fields

    Hemi hood scoop types?

    Got mine from AAR Fiberglass in Florida. The supports are extra. https://www.aarqualityfiberglass.com/products/scoop-barracudadart-1968-hemi
  4. Tony Fields

    67 Barracuda trim?????

    Thanks!
  5. Tony Fields

    67 Barracuda trim?????

    I prefer the stainless for the '67. Mine came with the trim.....had never been installed and the clips had not been installed. Some one had already found the trim and threw it in the back of the car.
  6. Tony Fields

    69 barracuda trunk seal issue

    A good way to adjust the trunk lid is to get inside with a wrench and have someone close the lid. Loosen the 4 bolts and have someone outside push the lid down where it belongs and then you tighten the 4 bolts. Worked for me after hours trying to adjust it on my own.
  7. Tony Fields

    Buffer/ polishers

    I use the Flex 3401 from autogeek
  8. Tony Fields

    68 Cuda....trunk lid adjustment question

    This is what I did on my fastback. Worked great. Make sure your assistant has the key to let you out.
  9. Tony Fields

    Why did you remove the bumper guards?

    Took them off the Barracuda because they had some rust issues. I think I gave them to someone here on the Forum. I like the cleaner look without them.
  10. Tony Fields

    Low tension hood springs

    If its the coiled up spring just go th a salvage yard and get a pair from a '87-'90 Chrysler G or J body front wheel drive car. They should be cheap. $$$ Daytona or LeBaron will work They work great on my '67 'Cuda with the fiberglass hood.
  11. Tony Fields

    68 windshield w-strip and molding in a 67

    Here's where the clips go.
  12. Tony Fields

    what holds the hood spring mechanism on the pin?

    I did this as a little insurance after installing the clip.
  13. Tony Fields

    Problem with windshield molding clips

    Hope this helps...should be the same for your car.
  14. Tony Fields

    the spring of the bonnet hinge

    Hi Edwin I just slipped mine over the split shaft, pushed on the retainers then wound them to add tension and slipped the curved end over the other shaft. The clamps on mine is for added insurance. Mine are on my '67 'Cuda
  15. Tony Fields

    Trim polishing

    On stainless I use Mothers Mag polish.
  16. Tony Fields

    OMG look at her trunk!

    Me Likey!!!!
  17. Tony Fields

    Need Pics of Underside

    Does this help?
  18. Tony Fields

    Trunk lid alignment

    Nah, I could have crawled out the other end if needed.
  19. Tony Fields

    Trunk lid alignment

    I got in my trunk then had the wife close it. I then backed off the 4 bolts. Next I had the wife push the lid down so it was aligned then I pulled the bolts back down. Worked the first time doing it this way.
  20. Tony Fields

    1967 Barracuda Penta Star Emblem?

    Be very careful if you have to "clean" the holes out to make it fit. Paint may chip.
  21. Tony Fields

    67 Barracuda stripes

    1967 had stripes down the middle.
  22. Tony Fields

    hemi scoop

    Got mine from AAR Fiberglass They are stainless. They are called stantions on their web site
  23. Tony Fields

    replacing rockers

    Thought you were talking about these. :oops:
  24. Tony Fields

    "318 Four Barrel" Emblem "Update"

    Looks great!!!!
  25. Tony Fields

    Anyone like the color

    Me likey!
  26. Tony Fields

    Hood pin install.......Want to make sure...

    Here's the pics I used. They were supplied by a member here on the Forum. Note: this was on the 'Cuda
  27. Tony Fields

    The days of welding body panels are coming to an end...

    Now that's funny right there:D
  28. Tony Fields

    Hood-Pin Location??

    That's what I did also.
Back
Top