Search results for query: *

  1. C

    Valve Springs

    If your springs are still good, leave them. If you want to improve your high rpm operation, go with a bee hive spring. But with a stock cam I see little benefit from it.
  2. C

    Plan Z Moved West

    I wish tony would have continued on with the project.
  3. C

    Electronic distributors

    Agreed.
  4. C

    225 oil pan modifications

    They have to be a certain distance from the rotating assembly to function properly.
  5. C

    225 oil pan modifications

    This moroso try has louvers stamped into it that “scrape” oil off the crank and rods
  6. C

    225 oil pan modifications

    Looks like your baffles could be bigger or you have to get your windage try to cover the sump well. Baffles also need drain back openings near the welded edge between the welds. Was it hard to weld with out burn through the pan?
  7. C

    Slant six lathe

    If you are in a third world county, this concept saves a lot of machine work. I once saw plans for a horizontal mill using this concept.
  8. C

    Hughs whiplash cam

    Isn’t it kind of hard to get an I6 cam to lope?
  9. C

    Sonic Test

    Do you have a sonic tester?
  10. C

    Rat Truck

    Big dustup in Wisconsin last fall with a32 highboy, no fenders cited for such by the Wisconsin state patrol. Fought it in court with the help of SEMA and another organization which I do not recall who but definitely has clout. Do not believe it was settled yet, but it came out that said highboy...
  11. C

    2bbl Intake... To Make or To Find?

    "I did not know that" same size port cross section size AND runner length?
  12. C

    2bbl Intake... To Make or To Find?

    if you’re talking about my post I’m getting at a one barrel manifold is more than likely a choking point for a two barrel carb
  13. C

    2bbl Intake... To Make or To Find?

    Not sure a 1 barrel manifold would support a 2 barrel carb. I suppose it would depend if the velocity of the flow would suit your engine. But 35 clams is a decent price for a manifold. As time goes on all this stuff will get harder to find.
  14. C

    HELP Cylinder Head

    or one too many valve jobs.
  15. C

    OCG is out of 225 cam blanks - how about 170?

    Are they buying cam cores? I got one.
  16. C

    Has anyone tried Blue Devil Rear Main Seal Stop Leak?

    It also may be the knurling on the crankshaft is worn from a rope seal and not changing the oil for an extended period of time. I have a crank that has this problem. You won’t know until you take it apart and inspect it. Only thing that goes in my engines is only and assembly lube. And suitable...
  17. C

    Broken bolt

  18. C

    Broken bolt

    Light intermediate tapping on the broken bolt while it is soaking will help the oil down the threads. Where are you located?
  19. C

    Gentlemen: What motor oil do you use?

    SSDAN that is damn deep article. I drowned a few pages in. I know this. I thought Amsoil and its extended drain oils were snake oil. But I took chance and still didn't trust them. After filling my crankcase with their oil and one of their filters which is made by Wix to their specifications by...
  20. C

    Gentlemen: What motor oil do you use?

    Call your local amsoil dealer. Best oil products money can buy. Tell him what you got and he will hook you up.
  21. C

    Starter died so I had a beer...

    And got myself a beer. The future is uncertain and the end is always near (for your starter that is).
  22. C

    Hughes Engines - Cams at the ICHSM

    I'm not saying he does not have good parts, his cam profiles are very popular. I'm just stating facts. there are other mopar people that have superior services which leads me to believe he is just a salesman. he knows his subjects well. I have spent time on the phone with him. when I have a...
  23. C

    Hughes Engines - Cams at the ICHSM

    Dave Hughes talks a good game. While a lot of his products have good street Cred, I dont share his opinion on everything, like plunger retainer clips that he uses in his lifters and his rocker arms. To the best of my knowledge, he does not have a stable of race cars and drivers. Nor does he...
  24. C

    Slant Six Rebuild Price

    have you checked the prices of a reman long block? take lots of pictures before and during removing the motor from your vehicle.
Back
Top