Search results for query: *

  1. G

    5.7 rebuild manual

    Some good info here as well: Rebuilding the 5.7L HEMI - Engine Builder Magazine
  2. G

    2011+ 5.7 hemi mystery sensor boss?

    That appears to be the block heater location.
  3. G

    Hemi Swap Info

    I've picked up a number of connectors (injector, TPS, MAP, IAT, etc.)from these guys: http://www.racetronix.biz/index.asp?url=IND
  4. G

    Alternator question

    The field wires can be interchanged.
  5. G

    Alternator question

    You can use a standard Chrysler voltage regulator as in the following diagram.
  6. G

    Emblems, what is everyone doing?

    A couple of pictures of mine...
  7. G

    Tti headers how!

    I also have TTI's (with TTI mounts) and didn't need to modify them. To get an acceptable amount of clearance I also shimmed the driver side engine mount with a 1/4" spacer. Since I used a A518 trans. I built the trans mount to set the engine/trans angle to ~3.5° which may have helped with the...
  8. G

    Auto trans, which did you use?

    I used an A518 behind the 5.7l in my '69 Dart. The amount of tunnel mods were minimal - just some minor tweaking for clearance and a new transmission mount. The upper portion of the original rear mount needed to be relocated to the top side of the floor pan for tail shaft / OD clearance. I...
  9. G

    67 Cuda 5.7 Hemi Tranny Advice Needed

    A few more pictures and some dimensions: Left to right: A518, A727, A500 Length and mount dimensions:
  10. G

    Feeding the Hemi with Fuel

    Mine gets it's fuel from an in-tank pump that fits though the existing pickup hole. I posted a couple of pictures here: http://www.forabodiesonly.com/mopar/showthread.php?t=48163 I've since changed the pump outlet size to 3/8" and the return to 1/2". The regulator / filter are up front in the...
  11. G

    hemi swap rear end

    Unfortunately Unisteer never released those items. I was told by a company rep that the extra cost of custom headers killed the project.
Back
Top