Search results for query: *

  1. Inertia

    Console mounting.

    Drill into the under bracket using the visible/existing holes, nobody will know, till it's taken off . The alternative is move the brkt . (bfh) Thinking on it, a person carrying the front seat out across the vehicle, could step on and squash that brkt .
  2. Inertia

    Console mounting.

    Put it where you like it, making sure it is totally functional. Drill a new hole . Believe it, - you may have been the only one to notice since it left the factory . Nobody would measure, nor care .
  3. Inertia

    Honda seats fit Dart?

    Very smart, very nice . Post a pic when done. Cheers
  4. Inertia

    Honda seats fit Dart?

    Try some BMW seats. One of the cars I service has a pair, don't know which model, they may be the most comfy seat I've sat in. Thinking of getting one to make into a recliner, retire this one, - use the base .
  5. Inertia

    Seat tracks for a body

    Looks like you already found these, lol Good luck . https://nationalmoparts.com/?s=A-body+seat+tracks&post_type=product&dgwt_wcas=1
  6. Inertia

    Cheapest way to fix seats with tears and missing foam?

    I've taken several seats into local auto upholstery shop to have split, stretched, cuts repaired. An "experienced" shop will have misc pieces/rolls of diff "textures" of material to very closely match what you have, or customize and balance the repair, on both sides, if that makes sense .
  7. Inertia

    HELP 69 "Spring Special" have 67 rear window cranks?

    The knobs generally pop off, and get replaced with what's handy. May find some info here , https://www.hamtramck-historical.com/library.shtml
  8. Inertia

    when is Legendary 25% off sales?

    Legendary isn't just seat covers. I got everything from them 25% off . Whole interior, whiskers, headliner, carpet, trunk mat, door panel, - everything .
  9. Inertia

    when is Legendary 25% off sales?

    Big one was just before Xmas, not sure of others .
  10. Inertia

    Locating an instrument cluster facia?

    I ship stuff like this in "sono-tube", the heavy cardboard tube they use to pour concrete pillars, virtually shipping-gorilla proof, for things that really matter. They're round, so seldom have stuff piled on top . Cheers .
  11. Inertia

    1970 Dart with no Headrests?

    My early 69 doesn't have them, later ones did . 1970 bench seats have back release hi on the seat, earlier has release down by the hinge. If your seat has the high back release, as mentioned, it likely was re-upholstered without the headrests.
  12. Inertia

    Tear in my seat cover. What can I do?

    A good (auto) upholstery shop can repair that, sometimes they have to, and can match/replace the material or just a panel, quite satisfactorily.
  13. Inertia

    New bucket seat cover installation advice?

    Put a dry-cleaning bag over the guts, before trying to slide the covers on, then pull the bag out . Good luck, cheers
  14. Inertia

    Steering column ground wire

    It goes between one of the 3 bolts with (white) plastic slides where column bolts to dash, - the other end goes to one of 4 bolts of column mount bracket, - to ground the column. Hope that make sense .
  15. Inertia

    Proper tuff wheel adapter gap?

    If you undid the 3 bolts where it goes thru the firewall, try loosening them, - and shifting the column . Leave them loose till everything aligns . just spit balling here !
  16. Inertia

    PG Classics Upholstery

    I've had the seat part of my bench split a seam a coupla times thru the decades, a local upholstery shop has done a great job of replacing and matching just a section of the original bench seat cover.
  17. Inertia

    What to use to replace the string with putty on it to hold the plastic

    Strip caulk, end to end, and some heavier clear poly . https://www.3m.com/3M/en_US/p/d/b40068361/
  18. Inertia

    PG Classics Upholstery

    I've had the opportunity to have PG and Legendary seat upholstery and door panels side by side, and after a few years, the quality shines thru ! PG upholstery material is quite a bit thinner, and with summer heat, the seats stretch and get baggy at the butt.. Legendary material is thicker, has...
  19. Inertia

    How Hard Is It To Do?

    I have had seat repairs done by a local auto upholsterers, they can replace a section of seat material. Matched mine really well, sewing the seams etc to match .
  20. Inertia

    Generic Solution for '65 Console Gear Selector Dust Cover?

    I used a piece of an old black 1 gal oil jug .. Cut it longer than you think, trim after test fit.
  21. Inertia

    Feedback Requested On Reproduction ‘69 Dart Dash Bezel

    The 1st set I got from PG the chrome was"wavy" and one lettering was incomplete. I tried to keep the first set, so I could pick and choose the best pieces, no go. Won't ship till I send the pieces back. That was a mistake. The second set, chrome was better, but not up to what I expected. The...
  22. Inertia

    PUI interior

    I've had the opportunity to have Legendary, and a product from PG Classic, side by side. There was no comparison . Legendary is great, even after a few years, The cheap ones stretched in the seat areas, the "leather" pattern was very poor, the seams didn't match up. I wouldn't order the cheap...
  23. Inertia

    1969 Swinger Interior ?

    Go look on the Legendary site. I got allmy Swinger stuff from them, they had great pix I think GTS interior was different, jmo
  24. Inertia

    Where are the Interiors?

    That was a few years ago, close to xmas, as I remember it. Great quality .
  25. Inertia

    Where are the Interiors?

    I waited for Legendary 20 - 25% sale. Got carpet, headliner, door panels, seat covers, whiskers, fr/rear windshield gskts, some other things $1400.
  26. Inertia

    Quarter window mechanism dismantle question.....

    Lol, I don't think there is a quantitative way to describe "how loose" they should be. So I will say, - let fear and common sense be your guide. Clean and lube all the pivot/rollers, and channels. Good luck
  27. Inertia

    Quarter window mechanism dismantle question.....

    There are probably suppliers closer to you. There is also a roller kit available, you should prob order that too, as other stuff is going to be worn out too . 65-68 C Body, 66-70 B Body & 67-76 A Body 2Dr H/T Quarter Window Slider/Roller-Repro
  28. Inertia

    Dash gauge "welding"

    Model car/plane cement. Read and follow instructions carefully !
Back
Top