Search results for query: *

  1. mikess68

    its time to seperate the mopar men from the boys

    outside of buying a coil and using that one or finding an old mopar with air and robbing it. i do not know. it was not hard to remove once i got over the nerves of pulling something that not know what it was. my guess is that it is a copper wire and runs to the switch that transfer cold to the...
  2. mikess68

    water pump

    1972 318. the blow by hose came off and lossed all the antifreeez. when putting back on, notice that inside the water pump hose housing it appears to have a check valve, or flow restriction type devide. 1/2 the flow seems to be cut off by a washer type device. is this normal or...
  3. mikess68

    vac lines

    Thank YOU!
  4. mikess68

    vac lines

    need a little help. have 72 ac dart swinger. the two vacc lines that come out of the dash, one goes to the cut off switch on the coolent, the other goes to the vacc bottle on the fender. one has a white line down the side broken like this// ======== the other is solid black. WHICH ONE...
  5. mikess68

    1972 ac

    right right, tks almost done hooking back up the air. yee pee
  6. mikess68

    1972 ac

    guys, need a litle help. on the dryer that has the preasure switch on it. it has two terminals that a whire that comes from the copressor plugs into. i have two identical wires, does it matter which one goes on which terminal?? they have been replaced i think and both with fit either...
  7. mikess68

    heater/ac controls question ??

    `thanks i appreciate the help. thought it was one more thing i had to fix. but looks ok and works ok.
  8. mikess68

    heater/ac controls question ??

    ive put back all the under dasy heat and ac. ran all the lines etc. question: the heater control seemed to have had a fabric type material dome over the push button controls and a light in there also. it seems to work ok, but wonder if i should make another cover or is it necesary? what...
  9. mikess68

    Well, brain fart! crap.

    thanks guys i didn't have a brain fart, i had a memory lasp. in addition to numbering the slave units, i also drew a diagram and labeled which slave unit was which. just found list so back in business. also thanks for the link that will help with the under hood hookups also. good day...
  10. mikess68

    Well, brain fart! crap.

    i took out the air and heat from my 72 swinger. replaced the heater had the ac checked. all is well. ..... now the brain fart. i labeled all the vac lines white on this side, red on that side. then i labeled the vac hoses 2, 3, 4 etc. and put the same number on the vac slave so i know which...
  11. mikess68

    heater valve etc

    thank you! that helped a lot. its amazing how such a little item can hold up the whole production. thanks once again:cheers:
  12. mikess68

    heater valve etc

    please help:. i sure could use some under hood pics of a 72 swinger heater valve, where its located, how, etc. mine did not have one when i got it. it is a factory ac car. everthing else is there. Q1, did it have a heater valve to interrupt the water flow to the heater core Q2. what it...
  13. mikess68

    its time to seperate the mopar men from the boys

    the line that runs into the coil, terminates in a couple of holes drilled through the core. it just slides out. it is a temp sensor that transmits temp to the elect switch. tks for everyones help. thought this might help. :)
  14. mikess68

    I need a drain tube

    you can use a water pump bypass hose. they are about the same. the one on a 67 442 is shapped the same and a 396 lookes like it, just trim to fit. p.s. yesterday, i had to chase my dog down to get mine back from him, i don't know how he got it but it has a couple of teeth holes in it now.
  15. mikess68

    its time to seperate the mopar men from the boys

    sorry for the fuzzy pic, cell phone. it is factory air, im the first to touch it in decades. the switch comes out in the lower left of the pic where it is soldered to the core. you can not remove the core from the box due to the tube being attached (without cutting the tube) it is attached by a...
  16. mikess68

    its time to seperate the mopar men from the boys

    ok, sorry, left this out a small copper tube runs from the ac dryer itself and is attached to the box under the hood. it has a electric switch on the end 7 inches from the dryer. it is attached to open and close a door on the box, which appears to be a internal air/external air source. maybe...
  17. mikess68

    smoke from the heater core?

    what does it smell like, electric? if so, take off hot wire right now. sweet/thick smell/taste. antifreeze. brownish/thick/road kill smell, that rats nest was a little too close to the heater core!
  18. mikess68

    its time to seperate the mopar men from the boys

    the small switch located on the side of the evaporator core. it has a tube running to the core. it probably is the cut off switch to monitor the temp and not let it get too hot or cold (freeze up) so. will the air work without it? will it get too cold and freeze up, or stay too warm and not...
  19. mikess68

    Restoring AC

    HEY,look at the post i just did on ac heater box i just removed. i talked to a ac person here and they said you should replace the dryer (the cylender type unit on the inner fender. they said it breaks down with years of non use and can runit your other componets by trying to use it due to the...
  20. mikess68

    heater box removal

    here is a slight overview of what i did and how i blazed the trail for anyone else with a heater box and ac car. the heater core section is only held by the sky hook inside the vend door on the pass side and by one bolt that joins it to the main box that has the ac unit. the main box is the...
  21. mikess68

    heater box removal

    tks, need the help.:)
  22. mikess68

    heater box removal

    cudaman 51. ok please tell me more. if im hearing you correct(i see the bolt between) im not looking to drop the heater box out from under the dash. i can take it out in 2 pices? if so, which bolts unhook the box from the firewall. looks like the one in the pic is a mounting screw, and there...
  23. mikess68

    heater box removal

    ok, i have to change the heater core. i thought while doing so id check the ac unit in the same box. ive seen where people say the entire box comes out with 3 bolts. but i can only see 3 bolts like the one pictured. i know about the one in the vent box, but where are the others. one behind the...
  24. mikess68

    heater box removal

    little guidance here is needed. i am going to take out the heater box and change the core. there are 3 bolts holding the elect fan onto a large donut gasket under the hood. also in at least 3 places, 1 next, left to blower motor, see pic, one up toward the AC hoses, and one over behind the...
  25. mikess68

    heater coil/ ac parts

    OK ONE MORE TIME. SOMEONE HAS TO OF HAD TO CHANGE A HEATER COIL IN AND a/c DART 72. DOES THE AIR COME OUT WITH THE HEATER BOX? PLEASE PLEASE LET ME KNOW. IM ON HOLD TILL THEN. TKS ..
  26. mikess68

    heater coil/ ac parts

    any help here? just wondering if i have to unhook the AC to removed the heater coil. don't know if ac stays under dash if heater box is removed. anyone know or know of "how to" article. i would aprec. tks
  27. mikess68

    heater coil/ ac parts

    a little help here when i take the heater box out to change the heater coil, does the AC parts stay or come out with the box. 1972 Dart swinger. sounds silly, but just want to know if i need to disconect the ac hoses running to the firewall etc.. also the vacc bottle mounted on the pass inner...
Back
Top