Search results for query: *

Great info above, next I would recommend is HEI upgrade & get the kickdown hooked up asap.

Check out Remflex gaskets.

Sounds like you're in good company.

With the temps you say and have some cool spots on radiator I think you're on the right track to pull radiator. possible major restriction or combustion gasses getting into cooling system. If you have an air compressor, I would disconnect the heater core and flush block and heater core separate...

Questions, when you say overheat, do you mean hot temp 220-230 range or is it boiling over?

73 Scamp started disc brake upgrade & replace front bushings and ball joints, Found right lower control arm and strut bar bent, car drove strait (that's what you get for looking) Got replacement control arm and strut from here, now front end and disc brakes done, repainted engine compartment. I...

slantsixdan is correct AGAIN, you are always full of backed up information, I found in 1972 FSM oil slot to right side of engine (facing camshaft). Thanks for all the info to all who responded. for all who responded correct they get a star on their forehead.

It does seem to contradict itself. I can think of 2 things. Send oil to cam lobes or the other way to get oil to cylinders? Great odds 50/50 better then Vegas. I guess I need to read some more. If any one has any more info I'm willing to listen.

engine 225, I removed the engine just to reseal due to prev owner installing a rebuilt engine and did not know how to install pan, v/cover without blue silicone all over and still leaking. after looking at the rods i see the oil squirt holes facing away from camshaft. I assume this is incorrect...

front bumper with 8 bolt holes

Old school rumor, take bearing pieces out, clean with emery cloth, cut off a piece of old leather belt reassemble and laugh your *** off if it works.

Great info here, 1 thing is a must! You need to flush your trans cooler and lines. You need air compressor or they sell cans of cleaner with flex lines to screw onto fittings.

I have a 1981 225 /6 with hyd lifters, I was told head is cracked. Qustion. Is the head different for solid to hyd lifters for oiling. Do i have to use a head for 1980 and up? Thanks for any info, I will be at pick a part looking this weekend.

Thanks for the info. I know about TQ front hub size. My question is a 1980 225 cast crankshaft engine, with a 904 trans Will it need a TQ with a balance weight? I know all cast crank 340-360-400-440 engine have different harmonic balancers and TQ with balance weights. If it does need a...

Question, 1980 225 engine has cast cranshaft, will early torque converter say 1971 need a balance weight.