Search results for query: *

I like 3:23 for all around cruising. I swapped to 3:55 in my 499" in GTS but will probably swap back to 3:23, Joe

He needs to come back through Tuscaloosa and look at my stash

I have been shifting mine in the forward pattern for 51 years without missing. Just got back from running through gears shifting about 5800 just below 6000 chip. Man I still enjoy it, Joe

I have one behind my 499" in the 67 GTS. Kenny Ford at PTC built my trans and converter. I wanted to use my stock console and shifter so he put a forward manual in it.

or steam it good and see what it looks like

I go with a broke belt in tire

I would call Kenny Ford at PTC

you can use metabo or portaband. I have run some for years that were cut down with no problems.

you may have to cut your axle enough to let it go all the way in

If you are using it as a street car I would stick with the 3:23. I made the swap to 3:55 and wish I hadn't. But if you are going to do it I have heard nothing but good about the Dr

Kenny Ford, PTC Muscle Shoals, Al

Kenny Ford at PTC in Muscle Shoals, Al built mine with forward manual vb

I have one in mine

you will have to shorten driveshaft. Are they both same bolt pattern? May have to do some adjusting on emergency brake cable where they connect from two cable to one if the cables are not same length

I had one shortened 1 3/4" a couple of weeks ago for $30

Leanna, that is a great introduction video, even saw my engine with my buddy Kirk as we were putting it in the "decoy". Keep up the great work, everyone should take the time to click the link and see examples of your awesome work!!!!!!!Joe

If you want to bring it to Tuscaloosa, Huey Smalley at Smalley's Trans is an old drag racer and can beef it up for you. I think he charged me $550. He is right off 15th street. Give him a call, Joe

reason I just bought complete 742 with 3.23 suregrip from Cudaspaz for half that. Gives me another center section I can swap out depending on the need at the time,Joe

wash the whole area above it with brake cleaner which will evaporate real quick and show where leak developes,Joe

I would stick with the 3:23 that you already have, wish I had, Joe

I load in back of pickup by myself so I would guess 85-90 lbs without converter,Joe

Kenny Ford at PTC is a mopar man and knows his stuff

Kenny Ford at PTC in Muscle Shoals, Al did good on my trans and converter for my Hensley 499" in my 67 GTS. Great person to deal with and reasonable, Joe