Search results for query: *

  1. sammie

    Help identifying this power steering bracket

    Thank you Rusty I do want to get a couple bucks for it
  2. sammie

    Help identifying this power steering bracket

    Is this for a 67 dart small block? I'm selling parts and can't remember what I took it off!
  3. sammie

    Steering Column Bearing Replacement HELP

    I know this is a OLD post. But ! roughidle , can you tell me what you used for a "bushing" ?your om box is full. I have the same bearing you used just need some help with the bushing .where to find .. thx
  4. sammie

    Manual steering box seal replacement

    Hi guys. I am restoring a 67 dart with manual steering. My question is , can I just change the two seals on the box without taking the box completely apart? I have the worm seal out already but didnt take the lower shaft seal out yet. I dont want to get in over my head with 120 bearings and...
  5. sammie

    1972 Demon Sub Frame Connectors

    Your car has torque boxes! Most cars didn't come with them! What car do you have?
  6. sammie

    identify this springs

    I was told that they are old school super stock springs. I have them in my 69 bb barracuda .
  7. sammie

    steering box ratio

    What ratio is it 20:1 or 16:1 ?:coffee2:
  8. sammie

    steering box ratio

    I just checked the broadcast sheet and It doen't have the s75 on it . Which would mean "fast ratio man steering" So I guess 24:1 box is factory standard?unless ordered...
  9. sammie

    steering box ratio

    What ratio manual steering box did my 1969 383 formula-s come with from the factory?
  10. sammie

    Sway bar bushing help!!

    I just did the same thing tonight in the garage.
  11. sammie

    bb pitman arm

    No need , But thanks for the offer.
  12. sammie

    bb pitman arm

    Gerald That's the one I was going to order from rock auto being I put another list of parts to get. I just didn't want to order it and have it show up to the door only to find out it don't fit!If it looks the same to you as your old one then ill order one. I already have extra parts here that...
  13. sammie

    Super stock springs

    Ill leave the stock ones in for now, probably wont be a problem with a stock 383 for now just a mild cam ,I don't understand How I am the only one with this problem?
  14. sammie

    bb pitman arm

    I am looking for the part number for a 69 bb pitman arm. It seems like all the part stores are selling the 7074 but I am also seeing that its not for 383 cars? Isn't there a difference in the bb pitman arm? or are they the same? I checked bigblockdart site and it says exc 383.
  15. sammie

    tie rod difference

    DAAAA that explains it. I am looking at theses . I am glad I asked. Thanks guys
  16. sammie

    tie rod difference

    I bought all new frontend parts and looking at them out of the box, I can't tell the difference between the inner and outer tie rod ends other then the part number. Whats the difference?:banghead:
  17. sammie

    Super stock springs

    they must be! I have a 68 318 barracuda and a 69 383 barracuda both have the bigger shock bolt on top. Same size as the bottom bolt. I guess I can change the top bolt? Car is up on my lift so I only looked at it from underneath.
  18. sammie

    Super stock springs

    I took your advise on these 32128 Monroe shocks. There is one problem I came across. The top shock bushings are smaller . So the shock won't slide over the top shock bolt. What did you do when you came to this problem?
  19. sammie

    identify this springs

    My car has numbers on the rear leafs, one is 3690269 and the other is 3690270. Are these old school super stock springs?Can't find much info on these. I am thinking about keeping them in there.
  20. sammie

    Torsion bar removal question

    This was a big help.Worked great ..Thanks alot!
  21. sammie

    Frame connectors on a rotisserie car?

    Thats what I was thinking!If its on its side!!Im leaning that way myself,was hoping to hear someone who has tried it.Thanks for the reply.
  22. sammie

    Frame connectors on a rotisserie car?

    I think I know the answer? I have my car "69 fastback" on the rotisserie and I would love to weild in frame connectors in now while its on there.has anyone done this with good results?Or does it have to be on its wheels?I hate like hell to throw the car back together to install the sfc's.only...
Back
Top