Search results for query: *

  1. S

    The worth of a lbp SG 8.25 w/ 3.91?

    I'd give my eye teeth for that rear end. I'm all the way out here in california though. I've seen them on craigslist for 350-400. every time I see one I don't have the cash right then. I have a 7 1/4 in my dart, and even though it's a sure grip unit we all know it's days are numbered...
  2. S

    Need help in San Jose

    I need an A body rear end for my 68 Cuda. Need 3.50's or higher numerically. I have an Offy single plain and other parts to trade or will pay cash. I have been everywhere, called all over the USA and I just don't have $2000 to drop!!! Anyone with some info please contact!!
  3. S

    too much cam for my converter?

    I spoke to Scott Brown at Straightline perf. and am looking at the grind that dusterb318 has been running, but I am wondering if I don't have enough stall for a cam like that? I have a factory high stall converter from a mid 80's cop car in an A999 wide ratio. If anyone here can advise me...
  4. S

    a note on 904s and 727s

    I have a 904 that is behind a late 318 police engine, the 904 was with it, it has the wide ratio gears and steel planetaries, and aside from better heads and intake/carb it is the way the police ran it. Now, I intend to lightly cam it, 219/489 hughes cam, and put on an air gap and cd ignition...
  5. S

    rearend swap

    Hey rumblefish, did you run drums or disc conversion? My cuda has large bolt disc setup on front, but 7 1/4 small bolt pattern w/drums back. I can get another 7 1/4 w/large pattern, but I'm afraid I'll blow it to pieces with my combo, so anyway I'd like to learn if it is cost effective to do...
  6. S

    999? tranny

    Well, I got to strike the deal on the cuda today, it's done and the car is mine, and i learned that the 999 is not a lock up version, which is good for me, a 998/904 shift kit will work, as wel as 904 valve bodies, so basically I got a beefy 904 with 5 clutches up front, 4 in back, steel...
  7. S

    999? tranny

    last night I read alot of threads about the 999 tranny when used with a big cam, it seems that people have a hard time finding higher stall converters that are lock-up style like the 999's. with the numerically higher first gear and a rear end ratio of 3.55-3.70 the launch should improve, but...
  8. S

    999? tranny

    No, it is not the original tranny or motor. It was a /6 converted to 318 police interceptor/999 tranny. The 75cc police heads were removed and replaced with 340 j heads, with the resultant increase in compression from the smaller chambers, and then an intake and carb by edelbrock, and electronic...
  9. S

    999? tranny

    What is a 999 transmission? My cuda has a 318 police interceptor w/a 999 transmission that came with it. Now, I know that in vin codes a 999 means special order, but I don't think this is the same. It IS a late model 318, so if any one can clue me as to the difference between the 904 and a 999...
  10. S

    dry 904

    I have the chance to get a race prepped 904 cheap, it was the back-up tranny for an 11 second demon, but it has been sitting for two plus years, and never saw fluid. it has no valve body but is otherwise complete. Will it be a big deal to get this tranny ready for use? The previous owner said...
  11. S

    2nd-3rd went south

    Thank you, fishy68, the trans is not in the car, so I will do what you said, and get back to you. Thank you very much!! they had a tunnel ram on it and I bet the linkage geometry was effected, but either way I will still adjust the bands if it don't smell fried, or have any debri in it. how can...
  12. S

    2nd-3rd went south

    I have a small block 727 from a gts 340, 2nd to 3rd gear shift went "buttery" I was told by the previous owner, and I have never done more than a torque converter change, so I have no idea what the issue is, nor how to fix, I read alot, though, and I began to suspect a valve body change would...
Back
Top