Search results for query: *

:rofl: Not to mention, anyone who has not heard of BFGs brown letters lives under a rock.

Just add water! Stir it up. Let it settle. Then, siphon off the de-alcoholed fuel!

I looked. Doesn't say made anywhere else. Under American law, it only has to disclosed if it's NOT made in USA BELLEVILLE Boots makes a fine made in USA combat boot. Look for 'Berry Act Compliant'

Probably be better if you posted it in the Wanted section. Not the For Sale section. Tom

Okay, maybe your TA’s have an issue. I was just speaking from my experience with mine. Anyways y’all are stuck in the 70’s/80’s, there are much better performing tires on the market. Get with the times.

...a proper quench, it will run up to 195psi (the highest I have tried) still on 87E10.. This would allow you to run any cam with an Ica between; 52* (the stock 360 2bbl cam), to 64* (the stock 340 cam), to about 68* before the bottom end starts to get soft; all of this runs on 87E10; and if...

Update: The infection is/was pretty bad. They have it under control now. But they will be cleaning my incesion and packing it for at least another week or so. I’m feeling better now and finally eating half decent.

Does anyone have the following bolts for for sale for a 1968 225 slant six: 1. valve cover bolts 2. timing case cover bolts 3. oil pan bolts 4. any other bolts to complete assembly. TIA --Walt Jackson

So you’re a not so serious alcoholic, it’s like your girlfriend being a little bit pregnant. lol

I often thought about heading west from Newmarket on 9 to Orangevale and then heading south, But I was afraid I'd get lost.

There's a better side to it than that. I did a lot of raves and I'm not a druggie or serious alcoholic.

Who says you have to be younger, just do it anyway and when you have a lady on each arm and having a kick *** time, who cares how old you're not.

Me too. It took me a several years to find a 4-door in this color. I was beginning to think they didn’t exist. It’s pretty faded though, and I will be repainting it this summer. I already bought 5 quarts of GA4 urethane 2-stage. I’m taking it to a body shop in the next couple of weeks for prep...

Lotsa work goin on here! Lookin good, buddy!

Thanks! These are the classic low back seats from JEGS. They are pretty comfortable (way more comfortable than my worn out bench seat) but I’m using the summit adjustable seat bracket mounts and I think the rear is too high, so I will be moving the rear bolts from the top hole (highest setting)...

I have one mounted in the tool box on the front of my trailer. Battery and all. Remote control, not wireless. Sometimes pulling at deck level can create issues like exhaust hanging up etc. I use a heavy wall 40 gallon drum as a roll to raise the unit for clearance there. But.....I have a fifth...

Love me some trap, keep your eye on bird not the bead. sling the string.

I have a set of heads I need an intake. Prefer a dual plane but will use a single plane.

My plan for the kickdown linkage on mine with the 5.9 is to source something from a truck or van that came with a 46RH or 46RE since I'm keeping the MPFI and beer keg intake. I think that setup might be a cable if I remember right.

plus getting the edges cut to fit right under the sill plates! Next try doing it with a console with shifter in the middle! PS: I do love that paint color!

Nice driver, yes take it slow to get some good ideas from above for correct install. Question: What brand of front seats do you have and are they comfortable with all adjustments?

I have a drum brake distribution block from a 74 Duster. $35.00 shipped in US. #'s on mounting bracket are 3369090 and 3374322 PM me if interested.

Looking for two fresh air inlets. The lower cowl is in good shape except one small repair needed but the two inlet towers (caps) are both in pretty sad shape and instead of repair I would like to just cut out the spot welds and replace both assemblies.

I don’t know about 17 years ago, but Warn is not being made in the US anymore. According to Summit, their 10k winch is being made in China You can also read between the lines on the Warn industries webpage- “For over 70 years, the small army of engineers, technicians, and machinists who...

Thanks, that’s a good idea about flipping it. Yeah I haven’t trimmed anything yet because the wrinkle is in the first 18” or so behind the firewall and I figure I only have one shot at getting that dimmer foot switch grommet hole cut in the right spot

Why? so you can smell stale, hot beer and vomit? No thanks. lol

10K Ramsey gear reduction that is about 40 years old sunk into the bed of the trailer with a glad hand setup. Welding lead to dual batteries on Dodge 3/4 ton to receiver hitch. Always plenty of power. You just need to run one power lead to truck batteries and the negative can go to your frame...

You can separate the ethanol from the gas all by yourself if you really want to. It's not difficult at all.

Here in good ol central PA, almost all gas is 15 percent ethanol, and has been for a dozen years or so. There are a handful of places that also have "non ethanol recreational fuel" but it's about 60 cents a gallon more money. I'm not a big believer in snake oil products, but I heard about...

I did something similar to TrailBeast and modified a later model plastic glove box.