Search results for query: *

  • Order by relevance
  1. lemondana

    ID mystery spacer ???

    I have one of those. It came with the 4175 Holley 600 cfm spreadbore that I bought back in 88. The secondary bores are not large enough for the TQ and I think not on the QJet either. You'll have to enlarge the holes somehow.
  2. toolmanmike

    Intake manifold questions

    :BangHead: :BangHead: :BangHead:
  3. D

    Today is 3-18 of 2024. HAPPY 318 DAY!!

    Awesome looking
  4. 4

    Intake manifold questions

    A good price on that LD4B intake. The ad says the manifold bolt holes were elongated for an earlier 273
  5. Dana67Dart

    67 and 69 Barracuda back-up light

    I was really close, the photos I was using did not show the compound angle on the back at the bulb holder. Left is new and improved Center is OEM Right is first try, photos only OEM 3D printed sample OEM
  6. M

    SBE Turbo magnum teardown

    I would recommend Cometic
  7. harrisonm

    Add Your Own Caption Part 356

    What's wrong with you, boy! You got **** for brains? You aint getting in my boat.
  8. Mean416

    SBE Turbo magnum teardown

    What gasket combo would hold up better?
  9. hemi71x

    Starting an air cleaner collection....

    This ones NASCAR.
  10. Mopar Tim

    Stop in for a cup of coffee

    To cloudy
  11. T

    PAXTON SUPERCHARGER NOVI 1200 KIT

    Another thought, the procharger, extreme velocity, and CSU carb hats are the best, some of the cheaper ones can kill a bunch of power. I use the new Holley hat (just bought a second one for another engine) and have been happy with it, although I’ve not seen any testing done on them yet.
  12. HemiSSDart

    Great Time at MATS.

    Yeah that dang rain put a damper on the Thursday and most of the day on Friday, then of course the morning of Saturday. I ended up buying a 73 Dart Sport rust free roller that I will flip when I get home and also ended up buying a collection of parts locally and I set up in the swap meet! Though...
  13. W

    Stop in for a cup of coffee

    Freaked me out as was unaware of launch let alone trajectory, looked like unstable on Easterly trajectory. Thought I was on Video recording but apparently did not hit all buttons. Commentary by me was outstanding as WTF !
  14. T

    PAXTON SUPERCHARGER NOVI 1200 KIT

    On all of my turbo junk I drill the oil pan just below the pan rail and install a bulkhead fitting. I usually cut the nut in half and after it’s tightened, trim off any excess thread past the nut and tack weld the nut to the fitting.
  15. hemi71x

    Starting an air cleaner collection....

    I was told when i purchased that it cleaner, it was for the speedways that allowed dual 4 bbl. carburation. Nascar only allowed one 4bbl, to my knowledge?
  16. T

    PAXTON SUPERCHARGER NOVI 1200 KIT

    You want the oil drain as low as possible but above the oil level. And the drain line as large as possible and as straight as possible. Unless the supercharger is on the roof do not use the valve cover.
  17. Professor Fate

    PAXTON SUPERCHARGER NOVI 1200 KIT

    If you're running an electric fuel pump, you could tap a block off plate and drain it into the fuel pump mount. Heck, now that I think about it, the factory used a hollow bolt on the fuel pump for the return line on the police package oil coolers- so you could probably do that even if you're...
  18. MoparCowboy

    Beginner Classic

    Another welcome from Texas. Looks like a good start, and yeah, sometimes one does need to be able to stop.
  19. Yunick13

    Today is 3-18 of 2024. HAPPY 318 DAY!!

    Where's all the BMW's?
  20. WAYNE0

    PAXTON SUPERCHARGER NOVI 1200 KIT

    The valve cover idea would be a good idea but i thinking they want you to put it in the pan because it would be gravity fed. Where the return comes off is a bit lower than the valve covers. I think lol ill have to look at it again.
  21. C

    Some FABO members just won't listen!!!!!

    Well, I guess he knows now
  22. 33IMP

    ID mystery spacer ???

    From what I have found on line, the manifold that used the Motorcraft 4350 would not accept a tq or quadrajet without mods, even though the 4350 is a "speadbore" Either way, it's a simple matter of opening up the spacer you want to use, to the size you need.
  23. W

    Holy Moly !

    Meant for Unconventional Local 12 in the area.
Back
Top