Search results for query: *

  • Order by relevance
  1. Dana67Dart

    727 Cooler Lines Help

    1/8 way too small 5/16 maybe 3/8" Unless you are racing 5/16 will be fine. What may be different is the location of the fittings on the trans 904 vs 727.
  2. I

    727 Cooler Lines Help

    yea i was looking into inline also seems legit. But what size are the trans cooler lines usually i see one that says 5/16 and the other says like 1/8th?
  3. Dana67Dart

    727 Cooler Lines Help

    Look at inline tube They probably have what you need. If you want to do it yourself, typically there is a male / male fitting on the transmission. Pipe thread on one end and a flare fitting on the other The same most likely holds true for the trans mission end. You can go to the parts store...
  4. moparcuda

    [FOR SALE] 225 carburator base plate trottle

    1966 dart Valiant 225 carburator base plate for rod trottle,very good condition$20. Plus shipping,take paypal
  5. Dana67Dart

    Swinger Tight Window Issue

    The black plastic moves up and down with the glass.and the black plastic is what is in contact with the metal of the vent window frame. The kits available are different than the originals. Which might be part of the issue. If the vent window and side glass is installed I would loosen up all...
  6. ocdart

    2024 14th Annual FABO NHRA "Pick 'Em" Game - It's NITRO Burnin' Time Again!!!

    Done. Your 'locked' Top Fuel pick is now Antron Brown. Please let me know if/whan you want to update any/all of your 'locked' picks.
  7. D

    3-18-24

    I know. Sorry about your family's tragic date
  8. D

    3-18-24

    Thanks
  9. Dana67Dart

    67 and 69 Barracuda back-up light

    If there was only money in it I would I specialize in the parts the aftermarket doesn't I have many designs and I strive for OEM look and feel. I can make most anything out of plastic but have to farm out the metal parts. The plastic is good for a lot of stuff. If you have a special...
  10. Professor Fate

    Swinger Tight Window Issue

    You can try waxing the glass. That has helped me in the past.
  11. I

    727 Cooler Lines Help

    hello i have a 67 dart with a cold case radiator and a 1980 360 727. Im looking for stainless lines for them since i have stainless all around the car already but i dont know what id look for. I have lines to them already but they cut them when removing the motor so even if i kept them i dont...
  12. S

    Went to Daryl Starbird car show in Tulsa this weekend

    Went there in 2008 with my very first Modded PT CRuiser. (Now on #7)
  13. B

    Advice needed on manifold repair

    No sense of humour???
  14. mopar head

    3-18-24

    Sorry to hear Dan, you will remember that date for the rest of your life. My family`s tragic date is friday 13
  15. 318willrun

    3-18-24

    Sorry for your loss
  16. 70SwingerGuy

    Swinger Tight Window Issue

    I agree, it looks like it shouldnt be necessary and there is no grease in there right now. Thanks again for your insight, Ill get back on it tomorrow and see what else I can find, im still thinking something is amiss because the regulator really doesnt want to move :(
  17. 68HemiRR

    [FOR SALE] Aluminum 1/2" 4 Barrel Carburetor Spacer/Adapter

    This is an Aluminum 1/2" 4 Barrel Carburetor Spacer/Adapter. I don't know who the manufacturer is, but it was patented in 1965. I have two of them. $15.00 ea. or both for $25.00. Local pickup, or buyer pays shipping.
  18. B

    NGK plugs.

    NGK 5 heat range is equivalent to a 12 heat range in Champion. I saw a pic about a week ago of a Champion plug where the centre electrode was pushed back inside the insulator......
  19. L

    [WANTED] 3rd gen hemi headers for aftermarket front clip

    I’m looking for some used headers that will fit a 69 dart with 5.7 hemi and aftermarket front clip (no tortion bars) If you have any for sale message me. I’m in Northern California 94513
  20. Dana67Dart

    Swinger Tight Window Issue

    I did but when you look at how the slides work it should not be necessary. In my case Im not sure I had the channels all lined up correctly. I'm not sure if all the pins are still in place :lol:
  21. S

    67 and 69 Barracuda back-up light

    Start your own reproduction Company! :)
  22. 70SwingerGuy

    Swinger Tight Window Issue

    Maybe there isnt anything wrong with it then, just VERY stiff as yours was. I just dont know about getting the window up and down to loosen it up. Ive read other posts about using a lube in the channel that the glass/strips run in, have you tried that?
  23. A body

    shots from the garage...

    Called and left a message today at his work #…. I run the Racepak O2 on the left bank only.
  24. Dana67Dart

    Swinger Tight Window Issue

    When I did mine after the frame was reinstalled it was VERY stiff. Over time it has loosened up
  25. RustyRatRod

    Converter- 67 273/904

    Remember, the stall test for converters must be done in high gear (which requires a manual valve body) for an accurate stall estimate. The converter has the most leverage against the engine then and it will stall to its maximum. It's all explained in the MP books. So your 1600-1800 could be...
  26. F

    Pressure in new tank- found out why

    Ok so I reestablished the vent like designed and capped the return nipple Problem solved.
  27. D

    3-18-24

    I didn't want to highjack 318willrun's thread. I think that it's awesome how he did 3-18, I don't like the date as that's the day my brother passed away 2 years ago.
Back
Top