Search results for query: *

Teens are utilitarian. THey were used in A bodies, B bodies, even C bodies. E, F,M,and J. Pick ups, trucks, motor homes, and even boats. Almost every one of those had a 2 barrel on top and made enough power and torque to get the job done. Hell, they were even in Police Cars in the M bodies. Like...

Sorry I should have put year - it’s a ‘68 2dr. I was looking on the Dante page and whilst the front is 139 or 169, the rear is 100+ more. By the stiff state of the rubbers front and rear and the delamination of the front screen, if they aren’t original they’re very old - and muddy under the...

Just be aware… those kits are made with 16 ga. Wire…tried one on my Dart with PIAA halogen bulbs…30 secs and the wires were warm to the touch. I’d stay away!

1969 Race Dart w/ 426 Hemi- garaged for 45+ years Go here for another incredible story!

I fit an early 340 exhaust manifold on the driver's side by switching to a power steering column and using an adapter (Firm Feel, etc) to hook it to the manual steering box. That put the joint far enough back to clear the manifold. I ran the outlet pipe between the torsion bar and the frame...

I looked on the eBay’s link, it doesn’t say anything about if it would work on a four headlight system, do you know if it would?

Ok, I can make out guns, breasts, beer and bacon, what else is in the picture?

Thanks so much! I’ll have to look up that story too. Thanks, I’ll be sure to post lots of pictures!

Carburetor operation and repair manuals and links to training movies and carb repair/modification threads are posted here for free download.

After waiting 2 weeks for them to ship my guitar, they canceled my order So I went with a British guitar called "Harlem X" (I figured, if the greatest metal band in history is British, maybe me playing a British guitar might help) I absolutely love the way this thing looks, and fits in my...

I wouldn't worry about it, his job seems to be finding threads to trash on 318's and UTG if he can squeeze it in :)

Me too, and I don't know why. I even get creeped out looking into a gallon of water real close.

:rofl:

Just guessing here, but with a super expensive rear piece, it must be a 65/66 hard top? If so, the rear is not being reproduced for either year as far as I know. But I would use Steele Rubber products for the front, and pray like hell the rear can be reused. If it’s any other year, Steele is...

RIP

RIP

:welcome: from :canada: If you've never done the Hot Rod Power Tour before, you will love it! Great choice of car to go with too. I had a wheel shop make a set of 15x7 sbp wheels for my 70 Dart years ago. Unfortunately I no longer have the car or the wheels. Look for a wheel repair shop in...

I am looking for lots, 67-69 Dart front/rear bumper.. e body v8 k member.. e body rear seat lower.. etc etc

So I'm not the only one here who watches those!

Don't some mill some off the manifold flange to gain room ? Angle mill it ? Not sure kind of remember people doing/saying that. I wouldn't do any engine or suspension moving to make it fit, what are we talking power wise an hp or two, I know all the little gains add up, but I wouldn't do...

women have their expensive hobbies too eh...? :) theres nothing like good equipment I always tell my wife to get "the good stuff buy it once and never worry about it again..."

Pics of the 70 340 duster

No problem! Been down this road!

Update: Neither my local bolt/nut fastener specialty store sells castle nuts and neither does local Auto Zone. In fact, I see the Centrix brand of idler arm (sold by Rock Auto) does not even use castle nuts and cotter pins anymore (according to the photo), just a "locking nut" alone. No thanks...

I bolted 2 plow markers to my trailer Makes it visible before it jack knives

Bell housing alignment done when first installed. Roller bearing as well when first installed. I'm hoping its a rod adjustment but wanted some ideas before trying anything. Thanks!!

A few more interesting photos. Lol. So I remember my dad sideswiping a tree when I was younger and caving the passenger side door in. When I picked up the car, it had a brown door on it. I asked the hydro guy if he put it on there and he said that he didn’t. So the lady who bought it from my dad...

Sad - one of my favorite songs from one of his albums: "Hand Picked!"

Maybe I misunderstood the situation, but let's not kid ourselves.... Summit was willing to make money on sellout counterfeit ****, until their name got tied to sellout counterfeit ****. **** China and **** Summit for dealing with them. The only thing that changed here is that someone got...

NOPE! For some odd reason, large, man-made objects in water (dams, jetties, large props, etc) give me the creeps! I can swim in the ocean just fine, but bring a large-ish boat next to me while doing so, or ask me to go diving on a wreck... Again: NOPE!