Search results for query: *

well that depends on the converter. if its some 99 dollar special with 80's technology then yes they will hate it. a very efficient modern converter is awesome.

Reading between the lines. "Bill of Sale" meaning it has no title..??

A friend and I ran into the same problem, I have no idea why they don't fit. The yokes on the driveshaft are brand new and have never had a vise or C clamp used on them. We are going to wrap tape around the cup surfaces and lightly grind (very little heat) down the offending material as to not...

nice

no, not really but offer what you think is right

Here is the Long block I had Brian massage the RPM heads I supplied, do the assembly and dyno it. 472 hp/489 ft/lbs. That was with a pair of AVS carbs. There's a crank scraper and Milodon Road Race oil pan.

Ya still need pictures per the rules!

"For Sale" are supposed to have pictures posted, per the rules. You need to post them before your post is deleted.

What's the question? 3/8 would be -6AN female for the filter.

I think "cheap" has to be defined here no? If we are talking effective use of funds put a 360 in it you'd need the heads anyway... :thumbsup:

I have early adjustables on my car for nearly 50 years now and they also have lock nuts on them. Never realized they weren't standard. I wonder if it was a change at some point?

No, it's a shim that goes between the input shaft/output shaft thrust washer... .032 thick, it looks like no one makes them anymore.. i can survive without it, just pissed off dealing with a trans company that sends wrong ****, the shim kit they just sent me even says for 1989 and up and doesn't...

.

Ran fuel lines last night and checked out my trans cooler and controller wiring a bit last night. I love the PFTE stuff and the little compression fittings just like the stuff for copper plumbing and pecs. What a great product was so easy to use, I do need to find some heat wrap from the front...

If you can't find anything here, Ebay often times has wagon tail light parts.

You will HATE a 3500 RPM converter on a street car with a small cam*. Have to say it again- HATE. *Unless you're one of a select few that enjoy it, and if you are before long you'll have a several grand or more into it and possibly be installing a 360/59/408, so it won't matter.

Most guys "on the cheap" aren't really going that fast are they? Low budget guys always hit a wall at some point. I've been in the arguments with 318 guys it sometimes ends up at "well the 318 is better on gas..." at that point the conversation is over because we are no longer talking...

...$8 NEW - Horn buzzer relay (aftermarket) - $15 USED - misc. seat belt mounting bolts x 12 - $20 USED - freshly refurbished A body blower motor mounting bracket to firewall with new gasket - $30 ****PM IF YOU NEED TO SEE CLOSE UP OF A PARTICULAR PART - THANKS**** Parts located in NW/Indiana

:popcorn:

:eek:

Funny, there was a "Star Wars" van nearly identical to that one- same color scheme and graphics, listed in Orlando last year. ...but it was a ford.

phantasm barracuda video you tube - Search Videos

...axle brake line brass T (no bolt) - $15 NEW - LARGE chrome master cylinder cover with bail wire - says "WARNING - clean filler cap before removing, use only DOT3 fluid from a sealed container" - $25 ****PM IF YOU NEED TO SEE CLOSE UP OF A PARTICULAR PART - THANKS**** Parts located in NW/Indiana

I am a little mind boggled.... Bought Spicer 7260 u joints, they won't actually fit in because the 'meat' in the center of the joint is hitting if that makes any sense? Does one dremel it a bit so it will clear? It is a miniscule amount but it will not allow it to go in. Not talking about...

what shim is it again? Where and what size? these? 727 End Play Shim Kit | Monster Transmission Parts or these? https://www.coperacingtrans.com/?product=727-washer-shimend-play for the thrust surface on planetaries? Year 1962 up- This shim can be used to compensate for wear on the thrust...

not that I know of.

without OMR I would guess @halifaxhops wont be here either?? that sucks to miss both

I think the 3rd bracket from the left looks like a poly 318 alternator brk, bolted to the cast iron water pump.

:BangHead: :BangHead: :BangHead: :BangHead: Sucks